OSHA 511 General Industry (2017)|Questions
100% Correct Solutions
When is a Fit Test required? - ANSWER If voluntary respirator use is permissible, then
user must read & sign Appendix D
Hazcom 1983 - ANSWER grants workers' RIGHT TO KNOW (RTK)
Hazcom 2012 - ANSWER grants workers' RIGHT TO UNDERSTAND (RTU)
3 Hazard Groups in Hazard Classification - ANSWER 1) Physical
2) Health
3) Environmental
Flammable - ANSWER Flash Point is below 73°F
Combustible - ANSWER Flash Point is higher than 73°F
Hazard Classification Process is divided into - ANSWER 3 Hazard Groups
1) Physical
2) Health
3) Environmental
OSHA Mission - ANSWER "To protect the health & safety of American workers"
Danger (signal word) - ANSWER a more severe hazard
, Warning (signal word) - ANSWER a less severe hazard
When is Fit Testing for Respirators required? - ANSWER When a respirator is required
to be worn
When establishing Hazard Controls, what is the 1st priority? - ANSWER
Engineering Controls
Question #26 - ANSWER answer is C (Dana)
Question #46 - ANSWER answer is A
"failure to completely tagout"
CGA - ANSWER Compressed Gas Association
OSHA reference for Compressed Gas(es) - ANSWER CGA Pamphlet P-1-1965
Flash Point - ANSWER minimum temperature at which a liquid gives off vapor within a
test vessel in sufficient concentration to form an ignitable mixture with air near the
surface of the liquid
Flash Point (short) - ANSWER lowest temperature to form an ignitable mixture with
air near the surface of the liquid
Flash Point is normally an indication of - ANSWER susceptibility to ignition
Key temperature of Flash Point? - ANSWER Less than 75°F is flammable
100% Correct Solutions
When is a Fit Test required? - ANSWER If voluntary respirator use is permissible, then
user must read & sign Appendix D
Hazcom 1983 - ANSWER grants workers' RIGHT TO KNOW (RTK)
Hazcom 2012 - ANSWER grants workers' RIGHT TO UNDERSTAND (RTU)
3 Hazard Groups in Hazard Classification - ANSWER 1) Physical
2) Health
3) Environmental
Flammable - ANSWER Flash Point is below 73°F
Combustible - ANSWER Flash Point is higher than 73°F
Hazard Classification Process is divided into - ANSWER 3 Hazard Groups
1) Physical
2) Health
3) Environmental
OSHA Mission - ANSWER "To protect the health & safety of American workers"
Danger (signal word) - ANSWER a more severe hazard
, Warning (signal word) - ANSWER a less severe hazard
When is Fit Testing for Respirators required? - ANSWER When a respirator is required
to be worn
When establishing Hazard Controls, what is the 1st priority? - ANSWER
Engineering Controls
Question #26 - ANSWER answer is C (Dana)
Question #46 - ANSWER answer is A
"failure to completely tagout"
CGA - ANSWER Compressed Gas Association
OSHA reference for Compressed Gas(es) - ANSWER CGA Pamphlet P-1-1965
Flash Point - ANSWER minimum temperature at which a liquid gives off vapor within a
test vessel in sufficient concentration to form an ignitable mixture with air near the
surface of the liquid
Flash Point (short) - ANSWER lowest temperature to form an ignitable mixture with
air near the surface of the liquid
Flash Point is normally an indication of - ANSWER susceptibility to ignition
Key temperature of Flash Point? - ANSWER Less than 75°F is flammable
