Name: Score:
146 Multiple choice questions
Term 1 of 146
While hammer testing a pole, this range circumferentially should be tested
Ground level only
From the ground to a maximum of 5 feet
Ground to as high as can be reached
Only the base of the pole
Term 2 of 146
Percentage of traffic fatalities involving an intoxicated or alcohol-impaired driver
55 %
45 %
35 %
55%
Term 3 of 146
(5) Components of a pole inspection
-fvd -electrical test -visual inspection -weight test -rocking test
safety monitoring system
-fvd -sound test -prod test -inspection report -rocking test
-FVD -Sound test -Prod test -Visual inspection -Rocking test
,Term 4 of 146
Taper length formula for posted speed 45 MPH or faster
L = Ws/2 (l is taper length in feet) (w is width of lane to be closed or offset) (s is posted
speed limit)
Osha 1910.268(g)(2)(i)-(ii), and 1929.959
-urban low speed (25-30 mph) -urban high speed (35-40 mph) -rural (45-55 mph) -
expressway/freeway (55+ mph)
L = WS (L is taper length in feet) (W is width of lane to be closed or offset) (S is posted
speed limit)
Term 5 of 146
These are 360 degree steady burn lights used to delineate the edge of a traveled way
45 %
Type D
Tangent
Type B
Term 6 of 146
Definition of steep roof
A roof with no slope at all
A roof with a slope less than 2:12
A roof that is completely flat
A roof having a slope greater than 4:12
,Term 7 of 146
Instance when fall protection is necessary
Only during stormy weather
Only when working on roofs
Anytime working near an edge that is 6 feet or more above a lower surface
When using a ladder at any height
Term 8 of 146
If a driver is going 60mph and needs to make a stop, this is the distance needed to come to a
complete stop
371 ft.
376 ft.
1000 ft
366 ft.
Term 9 of 146
The percentage rear-end collisions account for in accidents within a work zone
30%
40%
50%
20%
Term 10 of 146
Required fall protection for low slope roof less than 50 ft width
Safety monitoring system
Warning line system
Channelization
Fall protection plan
, Term 11 of 146
White or Black signs
Homeostasis
General Warning
Regulation
Temporary Traffic Control
Term 12 of 146
These two kinds of crashes occur frequently near the taper and channeling devices
Fixed Object & Sideswipe
Type b
Stop, proceed, alert/slow
-type C -type D
Term 13 of 146
What height should a staff flagging stop/slow paddle be?
Within 10 feet of the autoclave
1000 ft
Advanced warning area
Above eye level
Term 14 of 146
(4) situations when OSHA requires the use of a 5-point safety harness
-ladder use -ground work -indoor tasks -vehicle operation
-Bucket trucks -Climbing towers -Rooftops -Confined Space
-scaffolding -electrical work -painting -maintenance tasks
-office work -storage areas -cleaning -landscaping
146 Multiple choice questions
Term 1 of 146
While hammer testing a pole, this range circumferentially should be tested
Ground level only
From the ground to a maximum of 5 feet
Ground to as high as can be reached
Only the base of the pole
Term 2 of 146
Percentage of traffic fatalities involving an intoxicated or alcohol-impaired driver
55 %
45 %
35 %
55%
Term 3 of 146
(5) Components of a pole inspection
-fvd -electrical test -visual inspection -weight test -rocking test
safety monitoring system
-fvd -sound test -prod test -inspection report -rocking test
-FVD -Sound test -Prod test -Visual inspection -Rocking test
,Term 4 of 146
Taper length formula for posted speed 45 MPH or faster
L = Ws/2 (l is taper length in feet) (w is width of lane to be closed or offset) (s is posted
speed limit)
Osha 1910.268(g)(2)(i)-(ii), and 1929.959
-urban low speed (25-30 mph) -urban high speed (35-40 mph) -rural (45-55 mph) -
expressway/freeway (55+ mph)
L = WS (L is taper length in feet) (W is width of lane to be closed or offset) (S is posted
speed limit)
Term 5 of 146
These are 360 degree steady burn lights used to delineate the edge of a traveled way
45 %
Type D
Tangent
Type B
Term 6 of 146
Definition of steep roof
A roof with no slope at all
A roof with a slope less than 2:12
A roof that is completely flat
A roof having a slope greater than 4:12
,Term 7 of 146
Instance when fall protection is necessary
Only during stormy weather
Only when working on roofs
Anytime working near an edge that is 6 feet or more above a lower surface
When using a ladder at any height
Term 8 of 146
If a driver is going 60mph and needs to make a stop, this is the distance needed to come to a
complete stop
371 ft.
376 ft.
1000 ft
366 ft.
Term 9 of 146
The percentage rear-end collisions account for in accidents within a work zone
30%
40%
50%
20%
Term 10 of 146
Required fall protection for low slope roof less than 50 ft width
Safety monitoring system
Warning line system
Channelization
Fall protection plan
, Term 11 of 146
White or Black signs
Homeostasis
General Warning
Regulation
Temporary Traffic Control
Term 12 of 146
These two kinds of crashes occur frequently near the taper and channeling devices
Fixed Object & Sideswipe
Type b
Stop, proceed, alert/slow
-type C -type D
Term 13 of 146
What height should a staff flagging stop/slow paddle be?
Within 10 feet of the autoclave
1000 ft
Advanced warning area
Above eye level
Term 14 of 146
(4) situations when OSHA requires the use of a 5-point safety harness
-ladder use -ground work -indoor tasks -vehicle operation
-Bucket trucks -Climbing towers -Rooftops -Confined Space
-scaffolding -electrical work -painting -maintenance tasks
-office work -storage areas -cleaning -landscaping
