• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 2 out of 5 pages
Exam (elaborations)

Electrical Troubleshooting WITH COMPLETE SOLUTIONS.

Document preview thumbnail
Preview 2 out of 5 pages

Electrical Troubleshooting WITH COMPLETE SOLUTIONS.

Content preview

Electrical Troubleshooting WITH
COMPLETE SOLUTIONS.




open motor winding - ANSWER: condition in which an internal motor winding experiences a
break that prevents current from flowing through the winding

pitting - ANSWER: condition in which the surfaces of relay or contactor contacts become worn.

short circuit to ground - ANSWER: condition in which an internal motor conducting surface
comes in contact with the shell of the component.

shorted motor winding - ANSWER: condition in which damage to a motor winding exists,
creating a reduction in the resistance of the winding.

disconnected - ANSWER: in order to evaluate a holding coil, the wires must be:

good, shorted, or open - ANSWER: there are three possible conclusions a technician can come
to when evaluating a holding coil. What are they?

zero ohms - ANSWER: The ohms reading across a coil that is shorted and needs replacement.

infinity - ANSWER: The ohms reading across a coil that is open and needs replacement.

lowest range - ANSWER: The ohms setting on the meter to evaluate a coil.

next lowest range - ANSWER: If a holding coil's ohms reading is infinity the technician should
check again after changing the meter's setting to the

r terminal - ANSWER: Hot wire from the transformer to the thermostat that is red in color.

y terminal - ANSWER: yellow wire that carries power from the thermostat to the cooling circuit.

w terminal - ANSWER: white wire that transfers power from the thermostat to the heating circuit.

, g terminal - ANSWER: current carrying green insulated conductor that powers the indoor fan
circuit from thermostat.

24 volts - ANSWER: With the fan switch on "auto" and test probes on R and G terminals, the
voltage reading should be:

r and g - ANSWER: If the fan is in the "on" position but does not come on, a test to find out
whether you have a defective subbase, is to place a jumper between these two terminals

defective - ANSWER: When a system will not operate and a jumper is placed between terminals
R and G, and the fan starts, the subbase is

transformer - ANSWER: Non-starting indoor fan with a jumper between terminals R and G leads
the technician to search for the problem starting at the ________ or associated wiring.

subbase - ANSWER: Jumpering between terminals R and G, and finding that the fan does not
start usually means there is NO problem at the_______.

cooling circuit - ANSWER: Placing a jumper between terminals R and Y on the subbase is how
to energize the ______________

thermostat - ANSWER: If a cooling circuit runs (including compressor) only with a jumper, but
not by setting the thermostat to the cooling mode, the defective component is the
____________

heating circuit - ANSWER: Placing a jumper between terminals R and W on the subbase is how
to energize the _____________

thermostat - ANSWER: If a heating circuit runs only with a jumper, but not by setting the
thermostat to the heating mode, the defective component is the ____________

capped taped - ANSWER: To prevent the possibility of a short, unused wire leads on a multi-tap
transformer should be ______ and _______.

24 volts - ANSWER: When voltage is applied to the primary transformer winding, the secondary
should read ____________

resistance - ANSWER: A transformer that does not have a low voltage reading at the secondary
winding must be disconnected from the system and tested for ____________.

open - ANSWER: If the resistance reading across the secondary transformer winding is infinity,
the winding is ______ and needs replacement.

Document information

Uploaded on
February 18, 2025
Number of pages
5
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$11.99

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
PageTurners
3.0
(2)
Sold
13
Followers
0
Items
1608
Last sold
10 months ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions