• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 4 out of 38 pages
Exam (elaborations)

ASNT Level 3 Study Questions - Basic

Document preview thumbnail
Preview 4 out of 38 pages

ASNT Level 3 Study Questions - Basic

Content preview

ASNT Level 3 Study Questions - Basic
Study online at https://quizlet.com/_7rggcg
In general, shear waves are more sensitive to small discontinuities
than longitudinal waves for a given frequency and in a given
material because:
a. the wavelength of shear waves is shorter than the wavelength
of longitudinal waves.
b. shear waves are not as easily dispersed in the material.
c. the direction of particle vibration for shear waves is more sen-
sitive to discontinuities.
d. the wavelength of shear waves is longer than the wavelength of
longitudinal waves.
Common sources of neutrons for neutron radiography are:
a. electron linear accelerators.
b. isotopes of cobalt (e.g., Co-60).
c. nuclear reactors.
d. betatrons.
Which of the following statements is true concerning the usage of
SNT-TC-IA?
a. SNT-TC-1A is intended for use by a limited set of industrial
segments.
d. SNT-TC-1A is not intended to be used as a strict specification.
b. SNT-TC-1A was generated to satisfy the specification require-
ments of ASME.
c. SNT-TC-1A was last revised in 1988.
d. SNT-TC-1A is not intended to be used as a strict specification.
The SNT-TC-1A Interpretation Panel will respond to inquires
about SNT-TC-1A. The inquiry must be:
a. written and stated in general terms.
b. written including specific details of the case, e.g., names,
places, dates, and other pertinent facts.
a. written and stated in general terms.
c. considered by the ASNT Board of Directors if it involves de-
cisions that would place ASNT in a position between buyer and
seller.
d. ruled upon the Technical and Education Council of ASNT befor
the SNT-TC-1A Interpretation Panel prepares a response.
Which of the following statements is true?
a. ASNT has been providing certification examinations for Level III
personnel since the late 1960s.
b. SNT-TC-1A was first published in the late 1960s.
c. SNT-TC-1A requires that Level III personnel be qualified and b. SNT-TC-1A was first published in the late 1960s.
certified by ASNT.
d. SNT-TC-1A was developed to satisfy requirements for NDT
personnel qualification and certification set fourth in pats of the
ASME Boiler and Pressure Vessel Code.
With regard to the training of NDT personnel, the employer:
a. must conduct all of the training on the premises.
b. may engage an outside service who must conduct the training
on the employers premises. d. may engage an outside service but is, nevertheless, responsible
c. should not conduct the training, being too close to the compa- for the certification of the company's NDT personnel.
ny's problems.
d. may engage an outside service but is, nevertheless, responsible
for the certification of the company's NDT personnel.
SNT-TC-1A is intended as a guideline for employers:
a. to establish their own written practice that must be used as a
strict specification.
b. to establish their own written practice for the qualification and b. to establish their own written practice for the qualification and
certification of their NDT personnel. certification of their NDT personnel.
c. to define training, course requirements for contractors perform-
ing outside training services.
d. who are corporate members of ASNT.
The following is a statement in SNT-TC-1A: "It is recognized that
these guidelines may not be appropriate for certain employers,


, ASNT Level 3 Study Questions - Basic
Study online at https://quizlet.com/_7rggcg
circumstances, and/or applications." What should be done if the
guidelines are not appropriate?
a. The employer must change its operations to conform the guide-
lines.
b. The employer must seek relief from ASNT for inappropriate c. The employer should review the detailed recommendations and
applications. modify them, as necessary, to meet its particular needs.
c. The employer should review the detailed recommendations and
modify them, as necessary, to meet its particular needs.
d. The employer shall submit an inquiry in writing directed to the
SNT-TC-1A Interpretation Panel.
Which of the following statements is not true?
a. Certification is written testimony of qualification.
b. Qualification is the skill, training, and experience required for
personnel to properly perform the duties of a specific job. d. A certifying agency is any organization used by an employer in
c. The employer is the corporate or private entity that employs training NDT personnel.
personnel for wages or salary.
d. A certifying agency is any organization used by an employer in
training NDT personnel.
Who should be responsible to assess whether or not an individual
should be qualified and certified who does not perform NDT, but
monitors and evaluates NDT?
a. ASNT b. The individual's employer.
b. The individual's employer.
c. A government regulatory agency.
d. The customer's auditor.
To which of the following NDT methods is SNT-TC-1A currently
not applicable?
a. Visual testing
d. Holographic testing.
b. Thermal/infrared testing
c. Acoustic emission testing
d. Holographic testing.
ASNT intended that the recommendation of SNT-TC-1A be ap-
plied:
a. with flexibility and reason.
a. with flexibility and reason.
b. precisely as written.
c. as minimum requirements.
d. as maximum requirements.
Of the following, which is most appropriate to determine the needs
to qualify and certify personnel whose only NDT function is to
operate digital thickness equipment?
a. ASNT c. The employer
b. ASME
c. The employer
d. The customer
Certification is:
a. the skill, training, and experience required for personnel to
properly perform the duties of a specific job.
b. written testimony of qualification.
b. written testimony of qualification.
c. intended to be conferred by an organization independent from
the employer.
d. intended to be conferred by an organization hired by the em-
ployer.
Use of SNT-TC-1A is mandatory when:
a. the material being tested is for a U.S. Air Force contract.
b. the material being tested is for a U.S. Navy contract.
c. it has been specified by the customer.
c. it has been specified by the customer.
d. the material being tested is for a U.S. Army contract that requires
certification of NDT personnel.





, ASNT Level 3 Study Questions - Basic
Study online at https://quizlet.com/_7rggcg
The basic levels of qualification recommended by SNT-TC-1A are:
a. Trainee, Level I, Level II and Level III.
b. Trainee, Apprentice, Level I, Level II, and Level III. c. Level I, Level II, and Level III.
c. Level I, Level II, and Level III.
d. Level I, Level II, Level III, and Instructor.
Should personnel that operate ultrasonic digital thickness mea-
surement equipment be qualified and certified?
a. Yes, because SNT-TC-1A requires that all personnel performing
NDT be qualified and certified. d. Whether any NDT personnel should be qualified and certified
b. No, because SNT-TC-1A does not cover that specific operation. depends solely upon the needs of the employer and the require-
c. Only if required by industry codes, standards and specifications. ments of the employer's customers or clientele.
d. Whether any NDT personnel should be qualified and certified
depends solely upon the needs of the employer and the require-
ments of the employer's customers or clientele.
According to the recommendations of SNT-TC-1A, which of the
following is true concerning a Trainee's activities?
a. The Trainee may not conduct nondestructive tests independent-
ly and may not report test results.
b. The Trainee may not conduct nondestructive tests independent-
ly, but may interpret test results if acting under written instructions. a. The Trainee may not conduct nondestructive tests independent-
c. The Trainee should work along with a certified individual and ly and may not report test results.
my be considered a Level I, provided that the certified individual
co-signs any test reports.
d. Once the Trainee has worked along with a certified individual,
the Trainee may then independently perform any activities as
directed by the certified individual.
According to SNT-TC-1A, which of the following is not true for a
Level III?
a. Should be capable of assisting in establishment of acceptance
criteria.
b. Must train and examine the Level I and II personnel in his or her
b. Must train and examine the Level I and II personnel in his or her
organization.
organization.
c. Should be familiar with other commonly used NDT methods.
d. Should be capable of establishing techniques and selecting of
test methods.
According to written instructions, an NDT Level I may be qualified
to perform:
a. specific calibrations.
d. all of the above, and record test results.
b. specific nondestructive tests.
c. specific evaluations.
d. all of the above, and record test results.
May a Level I independently perform, evaluate, and sign for results
of nondestructive tests with supervision and guidance from a
Level II or III?
a. Yes, the intent in SNT-TC-1A is that the Level I may perform the
above functions provided that they are in accordance with written a. Yes, the intent in SNT-TC-1A is that the Level I may perform the
instruction of a Level II or III. above functions provided that they are in accordance with written
b. No, the Level I may perform the above functions in accordance instruction of a Level II or III.
with written procedures, but must be under constant supervision
and guidance of a Level II or Level III.
c. No, the Level I may not sign for test results.
d. No, the Level I is not allowed to take any independent action.

Which of the following statements is true concerning the defini-
tions of Trainee, Level I, II, and III in SNT-TC-1A?
a. The qualifications for Level III equal and exceed those of level
II. a. The qualifications for Level III equal and exceed those of level
b. SNT-TC-1A was intended for use by employers to determine the II.
proficiency of individuals at each level.
c. Except for a provision for a Trainee, Levels I, II, and III may not
be further subdivided. Level IIIs may not perform Level II functions


, ASNT Level 3 Study Questions - Basic
Study online at https://quizlet.com/_7rggcg
unless they pass Level II examinations.
d. A Trainee may perform all of the functions of a Level I if following
written instructions.
Which of the following is not within the scope of activities of a Level
II individual, as recommended in SNT-TC-1A?
a. Calibrate equipment
c. Establish techniques.
b. Prepare written reports.
c. Establish techniques.
d. Provide training.
As recommended in SNT-TC-1A, a Level II:
a. may conduct on-the-job training and guidance of Level I per-
sonnel, with the Level I training and guiding Trainees.
b. is responsible for the training and examination of Level I per- d. may conduct on-the-job training and guidance of Level I per-
sonnel for certification. sonnel.
c. must be capable of and responsible for establishing techniques.
d. may conduct on-the-job training and guidance of Level I per-
sonnel.
According to SNT-TC-1A, which of the following is true for a Level
III?
a. A Level III must have successfully completed at least two years
of science or engineering study at a college or university.
b. It is desirable that a Level III be a registered professional d. The Level III shall be capable of evaluating test results in terms
engineer. of codes, standards, and specifications.
c. The Level III is responsible for establishing all acceptance
criteria.
d. The Level III shall be capable of evaluating test results in terms
of codes, standards, and specifications.
In accordance with SNT-TC-1A, who is responsible for establish-
ing a written practice for the control and administration of NDT
personnel training, examination, and certification?
a. The NDT Level III b. The employer
b. The employer
c. ASNT
d. An appropriate regulatory authority
The responsibility of each level of certification for determining the
acceptability of materials or components:
a. need not be described in the employer's written practice since
those responsibilities are defined specifically in SNT-TC-1A.
b. should be described in the employer's written practice only if c. should be described in the employer's written practice under all
they are different from SNT-TC-1A recommendations. circumstances.
c. should be described in the employer's written practice under all
circumstances.
d. should be described in the employer's written practice if dictated
by customer requirements.
What factors are to be considered to ensure that a candidate for
certification in NDT understands the principles and procedures
involved?
a. Training, experience, and education.
a. Training, experience, and education
b. Training, experience, and prior certifications held.
c. Education, experience and percentage of time on the job doing
NDT.
d. Training, experience, and professional credentials.
As recommended is SNT-TC-1A, which of the following is true?
a. Overtime cannot be considered in meeting the minimum expe-
rience.
b. Overtime can only be considered if the candidate is being d. SNT-TC-1A does not currently provide a recommendation re-
qualified in more than one method simultaneously. garding overtime.
c. Overtime can be credited based on total hours.
d. SNT-TC-1A does not currently provide a recommendation re-
garding overtime.

Document information

Uploaded on
February 16, 2025
Number of pages
38
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$14.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
Classroom001
4.3
(3)
Sold
22
Followers
8
Items
602
Last sold
11 months ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions