Week 10 ATT Test Questions and
Answers
A register is a device that... - Answer-stores and transfers data
The storage is... - Answer-a temporary storage for binary data
The shift... - Answer-transfers data from one circuit to another
4bit storage: 1 clock pulse transfers _____ bits of data into a parallel register. - Answer-8
Serial input: #____ input applied to first flip flop. - Answer-1
Serial output: number___ - Answer-3
Parallel input: number____ input applied to all flip flops at one time - Answer-2
Parallel ouput: number ____ - Answer-4
, 4bit shift: the mode control input.... - Answer-sets register for serial or parallel transfer
4bit shift: a high to gate 2 results in a - Answer-low
4bit shift: a high to output gate 9 results in - Answer-a high or low depending on serial input
4bit shift: if serial loads flip flop A, S1 is ____ and ____ - Answer-load, serial
4bit shift: if serial load to flip flop D, S1 is ____ and ____ - Answer-load, parallel
8bit shift: a clock pulse is ____ to input parallel data. - Answer-not required
8bit shift: serial synchronous is applied to ____ input. - Answer-DATA
8bit shift: parallel asynchronous is applied to ____ input. - Answer-PRE
Data shifted manually is called... - Answer-asynchronous
Data shifted automatically is called... - Answer-synchronous
64bit memory: word is... - Answer-a complete piece of digital data
64bit memory: address is... - Answer-location of data in memory
64bit memory: write is... - Answer-transferring data into memory
Answers
A register is a device that... - Answer-stores and transfers data
The storage is... - Answer-a temporary storage for binary data
The shift... - Answer-transfers data from one circuit to another
4bit storage: 1 clock pulse transfers _____ bits of data into a parallel register. - Answer-8
Serial input: #____ input applied to first flip flop. - Answer-1
Serial output: number___ - Answer-3
Parallel input: number____ input applied to all flip flops at one time - Answer-2
Parallel ouput: number ____ - Answer-4
, 4bit shift: the mode control input.... - Answer-sets register for serial or parallel transfer
4bit shift: a high to gate 2 results in a - Answer-low
4bit shift: a high to output gate 9 results in - Answer-a high or low depending on serial input
4bit shift: if serial loads flip flop A, S1 is ____ and ____ - Answer-load, serial
4bit shift: if serial load to flip flop D, S1 is ____ and ____ - Answer-load, parallel
8bit shift: a clock pulse is ____ to input parallel data. - Answer-not required
8bit shift: serial synchronous is applied to ____ input. - Answer-DATA
8bit shift: parallel asynchronous is applied to ____ input. - Answer-PRE
Data shifted manually is called... - Answer-asynchronous
Data shifted automatically is called... - Answer-synchronous
64bit memory: word is... - Answer-a complete piece of digital data
64bit memory: address is... - Answer-location of data in memory
64bit memory: write is... - Answer-transferring data into memory
