DEFENSE BASIC PRESERVATION AND PACKING
CERTIFICATION AND PRACTICE EXAM NEWEST ACTUAL
COMPLETE 200 REAL EXAM QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+(2025/2026)
You are packaging an item in accordance with Method 51. You
need to know the area of barrier contained in the package. The
barrier is 60 inches wide by 85 inches long. What is the area in
square inches? - ANSWER-5,100 square inches
You are packaging an item in a barrel in accordance with
Method 55. The drum's radius is 15 inches and the drum's
height is 36 inches. What is the drum's volume in cubic inches?
- ANSWER-25,434 cubic inches
Which of these is a 4-way entry, double wing, stringer pallet? -
ANSWER-the lighter one with the edges hanging over
Which of these is a 2-way entry, double wing, blocked pallet? -
ANSWER-the darker one with the edges hanging over
Which of these is a 4-way entry, flush, stringer pallet? -
ANSWER-the darker one that is flush
,Which of these is a 2-way entry, blocked pallet? - ANSWER-the
lighter one that is flush
Which publication contains the military standards for pallets
and palletization? -
ANSWER-MIL-STD-147
You are loading a pallet. Where do you look up the load
pattern? – ANSWER-MIL-STD-147, Appendix B
You are loading a pallet and need to determine its load pattern.
Which two container measurements do you need in order to
locate the load pattern number in MIL-STD-147 Table B-I? -
ANSWER-Length and width
Areas shaded black on a load pattern represent empty areas
that – ANSWER-must be filled with stability dunnage
Which of these pallet loads has an overhang? - ANSWER-the
one with the black cylinders
Which of these images shows edge protectors? - ANSWER-the
one with the white protectors
, Which of these images shows a collar? - ANSWER-the orange
tubes
You are loading a pallet. Where do you look up load type and its
preferred stability dunnage and bonding method? - ANSWER-
MIL-STD-147, Appendix A
Which of the following bonding methods secures the load to
the pallet? - ANSWER-Method D: Tie-down straps
A palletized load weighs 600 pounds and requires 6 tie-down
straps. To keep the load from falling apart during handling and
transit, you must use strapping material with a breaking
strength of at least - ANSWER-100 pounds
Which strap is the first to be applied to the palletized load? -
ANSWER-The black one
Which structure is installed before loading cargo into an end-
opening ISO container? - ANSWER-Front-blocking assembly
You have to load a side-opening ISO container with loaded 40 x
48 inch pallets. Which pallet unit number should you use? -
ANSWER-Pallet Unit No. 11
CERTIFICATION AND PRACTICE EXAM NEWEST ACTUAL
COMPLETE 200 REAL EXAM QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+(2025/2026)
You are packaging an item in accordance with Method 51. You
need to know the area of barrier contained in the package. The
barrier is 60 inches wide by 85 inches long. What is the area in
square inches? - ANSWER-5,100 square inches
You are packaging an item in a barrel in accordance with
Method 55. The drum's radius is 15 inches and the drum's
height is 36 inches. What is the drum's volume in cubic inches?
- ANSWER-25,434 cubic inches
Which of these is a 4-way entry, double wing, stringer pallet? -
ANSWER-the lighter one with the edges hanging over
Which of these is a 2-way entry, double wing, blocked pallet? -
ANSWER-the darker one with the edges hanging over
Which of these is a 4-way entry, flush, stringer pallet? -
ANSWER-the darker one that is flush
,Which of these is a 2-way entry, blocked pallet? - ANSWER-the
lighter one that is flush
Which publication contains the military standards for pallets
and palletization? -
ANSWER-MIL-STD-147
You are loading a pallet. Where do you look up the load
pattern? – ANSWER-MIL-STD-147, Appendix B
You are loading a pallet and need to determine its load pattern.
Which two container measurements do you need in order to
locate the load pattern number in MIL-STD-147 Table B-I? -
ANSWER-Length and width
Areas shaded black on a load pattern represent empty areas
that – ANSWER-must be filled with stability dunnage
Which of these pallet loads has an overhang? - ANSWER-the
one with the black cylinders
Which of these images shows edge protectors? - ANSWER-the
one with the white protectors
, Which of these images shows a collar? - ANSWER-the orange
tubes
You are loading a pallet. Where do you look up load type and its
preferred stability dunnage and bonding method? - ANSWER-
MIL-STD-147, Appendix A
Which of the following bonding methods secures the load to
the pallet? - ANSWER-Method D: Tie-down straps
A palletized load weighs 600 pounds and requires 6 tie-down
straps. To keep the load from falling apart during handling and
transit, you must use strapping material with a breaking
strength of at least - ANSWER-100 pounds
Which strap is the first to be applied to the palletized load? -
ANSWER-The black one
Which structure is installed before loading cargo into an end-
opening ISO container? - ANSWER-Front-blocking assembly
You have to load a side-opening ISO container with loaded 40 x
48 inch pallets. Which pallet unit number should you use? -
ANSWER-Pallet Unit No. 11
