NX Product Design Fundamentals questions with verified answer2

NX Product Design Fundamentals questions with
verified answers
________ are more reliable as mirror planes than faces.
-Datum planes
-Feature
-Basic Planes
-Fixed Datum Planes Ans✓✓✓--Datum planes


A characteristic of a model that is required for a molded or cast model typically
includes


-A model with drafted sides
-a model with vertical sides
-a model that is hollow
-a model that has undercuts Ans✓✓✓--A model with drafted sides


A conditional expression is created using what kind of statement?


-Do-Until
-If-Else
-Do-While
-Else-If Ans✓✓✓--If-Else


A Mirror Body must use what as the mirror reference?

,-planer face
-Datum Plane
-linear edge
-Datum Axis Ans✓✓✓--Datum Plane


A part family table is stored in what file? Ans✓✓✓-An internal spreadsheet in the
template file


A Technical Data Package is a collection of one or more files or documents that
contains all the information necessary to define a product and its requirements.
(T or F) Ans✓✓✓-True


After using the Show Dimensions command on a sketch how do you erase the
temporarily-displayed dimensions from the graphics window? Ans✓✓✓-Use the
Refresh command


After you mirror an assembly using the Mirror Assembly command, how can you
tell which parts contain an associate geometry link?
-Look in the Assembly Navigator
-Look in the Part Navigator
-Look in the Constraint Navigator
-Look in the Expressions dialog Ans✓✓✓--Look in the Part Navigator


After you mirror an assembly using the Mirror Assembly command, how can you
tell which parts contain an associate geometry link? Ans✓✓✓-Look in the Part
Navigator

,All family members of the Template part are _______. Ans✓✓✓-Read only


All part family members created from the template part have what characteristic?
Ans✓✓✓-They are Read Only


All parts files with geometry have what two reference sets created automatically?
Ans✓✓✓-Empty and Entire Part


As you create PMI in your model, you notice the PMI display size does not change
when you zoom in and out. What PMI setting controls this behavior? Ans✓✓✓-
The Enable Resize and Settings Relative to View Zoom Factor PMI preferences


Aside from Along Vector, what is the other type of creation method in the Helix
command?
-Along Face
-Along CSYS
-Along Pattern
-Along Spine Ans✓✓✓--Along Spine


By default, all components you add to the assembly have how many degrees of
freedom? Ans✓✓✓-6


By default, what happens to the child features when their parent feature is
deleted? Ans✓✓✓-The child features are automatically deleted


Can design intent be incorporated after the initial model construction?

, -No, the design intent is locked in from the start
-Only if the part started as an imported model
-Only if the model is not used in an assembly
-Yes, but may be more difficult Ans✓✓✓--Yes, but may be more difficult


Changes to the PMI section view must be made in what application? Ans✓✓✓-
Modeling


Datum targets can be: (Select all that apply) Ans✓✓✓-Points, Lines, and Areas


Design in context of an assembly means that the assembly is the displayed part
and the component you are editing is what? Ans✓✓✓-The Work Part


Design intent will determine which one of the following tasks.


-The modeling strategy
-If a drawing is required
-The color to make the model
-The material density Ans✓✓✓--The modeling strategy


Direct Modeling uses these methods: Ans✓✓✓-X-Form, Match Edge, and Sew


Draftcommand is typically used to apply ______ to faces for use in molded or die
cast parts.