NX DESIGN ASSOCIATE CERTIFICATION EXAM
questions with verified answers
A characteristic of a model that is required for a molded or cast model typically
includes Ans✓✓✓-A model with drafted sides
A conditional expression is created using what kind of statement? Ans✓✓✓-If-
Else
After using the Show Dimensions command on a sketch how do you erase the
temporarily-displayed dimensions from the graphics window? Ans✓✓✓-Use the
Refresh command
All family members of the Template part are _______. Ans✓✓✓-Read only
All parts files with geometry have what two reference sets created automatically?
Ans✓✓✓-Empty and Entire Part
Aside from Along Vector, what is the other type of creation method in the Helix
command? Ans✓✓✓-Along Spine
By default, all components you add to the assembly have how many degrees of
freedom? Ans✓✓✓-6
By default, what happens to the child features when their parent feature is
deleted? Ans✓✓✓-The child features are automatically deleted
,Can design intent be incorporated after the initial model construction? Ans✓✓✓-
Yes, but may be more difficult
Design in context of an assembly means that the assembly is the displayed part
and the component you are editing is what? Ans✓✓✓-the work part
Design intent will determine which one of the following tasks. Ans✓✓✓-The
modeling strategy
Draftcommand is typically used to apply ______ to faces for use in molded or die
cast parts. Ans✓✓✓-slope
How can you create a note with a leader? Ans✓✓✓-Click and drag while placing
the note
How can you easily edit a feature of a model? Ans✓✓✓-Double click the feature
in the part navigator
How can you investigate the design intent of a sketch? Ans✓✓✓-Vary a
dimension to see how the sketch changes
How can you tell which reference set is displayed? Ans✓✓✓-Look for the
reference set name in the Assembly Navigator
How do you create a projected view on your drawing? Ans✓✓✓-Right-click a
view border and choose Add Projected View
, How do you create an assembly using the Bottom-Up method? Ans✓✓✓-Create
the parts separately and then add them to the assembly
How do you create offset curves in both directions at the same time? Ans✓✓✓-
Toggle on Symmetric Offset
How do you reposition a drawing view? Ans✓✓✓-In the drawing area, click and
drag the view border to the desired location
If a reference set is deleted from a component part that is used in multiple
assemblies, what reference set will be used in its place the next time one of the
assemblies is opened? Ans✓✓✓-The next available reference set defined in the
Assembly Load Options
If you load a component using Lightweight Representation in which cases should
you switch to Exact Representation? Ans✓✓✓-You want to display an accurate
representation of the assembly
If you need to make a duplicate solid body to modify, what command would you
use? Ans✓✓✓-Extract Geometry - Body
If you use the Shell command on a solid body and do not select at least one face
to pierce which of the following will the result be? Ans✓✓✓-A hollow solid body
if(Length==5)(150)else if(Length==4)(195)else(25) is an example of what type of
expression. Ans✓✓✓-conditional
questions with verified answers
A characteristic of a model that is required for a molded or cast model typically
includes Ans✓✓✓-A model with drafted sides
A conditional expression is created using what kind of statement? Ans✓✓✓-If-
Else
After using the Show Dimensions command on a sketch how do you erase the
temporarily-displayed dimensions from the graphics window? Ans✓✓✓-Use the
Refresh command
All family members of the Template part are _______. Ans✓✓✓-Read only
All parts files with geometry have what two reference sets created automatically?
Ans✓✓✓-Empty and Entire Part
Aside from Along Vector, what is the other type of creation method in the Helix
command? Ans✓✓✓-Along Spine
By default, all components you add to the assembly have how many degrees of
freedom? Ans✓✓✓-6
By default, what happens to the child features when their parent feature is
deleted? Ans✓✓✓-The child features are automatically deleted
,Can design intent be incorporated after the initial model construction? Ans✓✓✓-
Yes, but may be more difficult
Design in context of an assembly means that the assembly is the displayed part
and the component you are editing is what? Ans✓✓✓-the work part
Design intent will determine which one of the following tasks. Ans✓✓✓-The
modeling strategy
Draftcommand is typically used to apply ______ to faces for use in molded or die
cast parts. Ans✓✓✓-slope
How can you create a note with a leader? Ans✓✓✓-Click and drag while placing
the note
How can you easily edit a feature of a model? Ans✓✓✓-Double click the feature
in the part navigator
How can you investigate the design intent of a sketch? Ans✓✓✓-Vary a
dimension to see how the sketch changes
How can you tell which reference set is displayed? Ans✓✓✓-Look for the
reference set name in the Assembly Navigator
How do you create a projected view on your drawing? Ans✓✓✓-Right-click a
view border and choose Add Projected View
, How do you create an assembly using the Bottom-Up method? Ans✓✓✓-Create
the parts separately and then add them to the assembly
How do you create offset curves in both directions at the same time? Ans✓✓✓-
Toggle on Symmetric Offset
How do you reposition a drawing view? Ans✓✓✓-In the drawing area, click and
drag the view border to the desired location
If a reference set is deleted from a component part that is used in multiple
assemblies, what reference set will be used in its place the next time one of the
assemblies is opened? Ans✓✓✓-The next available reference set defined in the
Assembly Load Options
If you load a component using Lightweight Representation in which cases should
you switch to Exact Representation? Ans✓✓✓-You want to display an accurate
representation of the assembly
If you need to make a duplicate solid body to modify, what command would you
use? Ans✓✓✓-Extract Geometry - Body
If you use the Shell command on a solid body and do not select at least one face
to pierce which of the following will the result be? Ans✓✓✓-A hollow solid body
if(Length==5)(150)else if(Length==4)(195)else(25) is an example of what type of
expression. Ans✓✓✓-conditional
