MSSC Quality Exam with Complete
Solutions
production personnel use standard operating procedure to determine ___________. the
proper way to do a task
the quality assurance department is the group who provides information to help ___________.
compare actual quality to customer needs.
am example of a spreadsheet function is___________. SUM
spreadsheets are sued to perform calculations in___________ and produce graphs. rows
and columns
benchmarking is a ___________ tool. process improvement
companies often___________ to create a baseline measurement for improvements in machine
performance. establish a metric
employees commonly use email to ___________ employees at other computers. send
messages in text form.
the operator is the first person who is responsible for ___________ in the production process.
product quality
___________ may provide valuable information concerning a products quality.
performing equipment checks during a quality inspection
,an important statistic is calculated by by dividing the number of parts produced by the number
of hours worked. this statistic is called___________. labor productivity
When the quality of a product improves, it is a sign that __________. continuous
improvement activities are working
reduced costs and increased value are products of ___________ good quality assurance
programs.
when less labor is needed to produce the same or more quantity of product, there is
___________ higher productivity
modern companies emphasize good communication to ___________ improve quality
if current means used to inspect and monitor processes prove to be unsuitable___________
they should be corrected using an appropriate procedure.
A good __________ can both increase value to the customer and reduce product cost.
quality assurance system
the PDCA cycle was created by w. edwards deming and stand for ___________ plan, do,
check, act
new product design teams should perform a ___________ as early in the design process as
possible. design failure mode and effect analysis
processes are often described by a ___________ sequence of events
, and engineering change (ECN) is used to notify of changes to ___________ a product
drawing
parts that are labeled as ok to ship must ___________ meet compliance
Red tags are typically attached to Parts that are __________. scrapped
The sampling plan uses a __________ chart that indicates to an inspector the number of parts
to inspect based on the size of the product batch. frequency
the cost of a products raw materials does not typically determine if ___________ the
product is non conforming
certain characteristics of parts are essential for its proper operation. identifying these
characteristics as ___________ helps set up a meaningful quality inspection program.
critical
Parts labeled ______ should be inspected to determine if they should be reworked or scrapped.
hold
when parts need further inspection they should be labeled as ___________ hold
measurement of product quality attributes can be assisted by performing ___________
daily quality and equipment checks
automated part inspection commonly uses ___________ vision systems
Solutions
production personnel use standard operating procedure to determine ___________. the
proper way to do a task
the quality assurance department is the group who provides information to help ___________.
compare actual quality to customer needs.
am example of a spreadsheet function is___________. SUM
spreadsheets are sued to perform calculations in___________ and produce graphs. rows
and columns
benchmarking is a ___________ tool. process improvement
companies often___________ to create a baseline measurement for improvements in machine
performance. establish a metric
employees commonly use email to ___________ employees at other computers. send
messages in text form.
the operator is the first person who is responsible for ___________ in the production process.
product quality
___________ may provide valuable information concerning a products quality.
performing equipment checks during a quality inspection
,an important statistic is calculated by by dividing the number of parts produced by the number
of hours worked. this statistic is called___________. labor productivity
When the quality of a product improves, it is a sign that __________. continuous
improvement activities are working
reduced costs and increased value are products of ___________ good quality assurance
programs.
when less labor is needed to produce the same or more quantity of product, there is
___________ higher productivity
modern companies emphasize good communication to ___________ improve quality
if current means used to inspect and monitor processes prove to be unsuitable___________
they should be corrected using an appropriate procedure.
A good __________ can both increase value to the customer and reduce product cost.
quality assurance system
the PDCA cycle was created by w. edwards deming and stand for ___________ plan, do,
check, act
new product design teams should perform a ___________ as early in the design process as
possible. design failure mode and effect analysis
processes are often described by a ___________ sequence of events
, and engineering change (ECN) is used to notify of changes to ___________ a product
drawing
parts that are labeled as ok to ship must ___________ meet compliance
Red tags are typically attached to Parts that are __________. scrapped
The sampling plan uses a __________ chart that indicates to an inspector the number of parts
to inspect based on the size of the product batch. frequency
the cost of a products raw materials does not typically determine if ___________ the
product is non conforming
certain characteristics of parts are essential for its proper operation. identifying these
characteristics as ___________ helps set up a meaningful quality inspection program.
critical
Parts labeled ______ should be inspected to determine if they should be reworked or scrapped.
hold
when parts need further inspection they should be labeled as ___________ hold
measurement of product quality attributes can be assisted by performing ___________
daily quality and equipment checks
automated part inspection commonly uses ___________ vision systems
