ROADWAY WORKER PROTECTION
TRAINING EXAM 100% SOLVED.
Cardinal Rule 1 - ANSWERSAll personnel regardless of rank or title, shall be RWP
trained and qualified before entering the Authority Roadway.
Cardinal Rule 2 - ANSWERSPersonnel shall expect, and be vigilant of, rail vehicle
movement in all directions at all times.
Cardinal Rule 3 - ANSWERSRail Operations Control Center (ROCC) shall never
authorize rail vehicle movement in the opposite direction of normal traffic flow without
confirmation of clear track.
Cardinal Rule 4 - ANSWERSThere shall be a dedicated Watchman/Lookout anytime
there is rail vehicle movement within any work zone or when work is conducted on an
"active" revenue track.
Ample Time/Warning - ANSWERSRequires workers to be in a position of safety not less
than 15 seconds before a train or rail equipment moving at the maximum speed
authorized on that track can pass the location of the Roadway Worker, or sufficient
levels of protection that permit workers time to clear the tracks without urgent movement
(i.e. Exclusive Track Occupancy, Inaccessible Track, or Foul time).
Red Hot Spots - ANSWERSLocations on the Roadway where Foul time protection is
required.
Who designates the place of safety? - ANSWERSRoadway Worker in Charge
When can you walk through a Red Hot Spot area on the Roadway? - ANSWERSWhen
the RWIC has requested Foul Time and it has been implemented by ROCC.
The Third Rail carries how much voltage? - ANSWERS750v DC
The Roadway Worker in Charge (RWIC) - ANSWERSA qualified employee whose
training allows them to provide and set up protection for those working on the Roadway.
When you see the Watchman/Lookout holding the 'W' Warning Disk out and up -
ANSWERSIt means you must stay clear of the track.
Cardinal Rule 5 - ANSWERSThere shall be no fouling of the Authority Roadway unless
it is ABSOLUTELY necessary to perform your job.
Cardinal Rule 6 - ANSWERSThere shall be no clearing of Roadway Workers or
equipment to any track at any time.
TRAINING EXAM 100% SOLVED.
Cardinal Rule 1 - ANSWERSAll personnel regardless of rank or title, shall be RWP
trained and qualified before entering the Authority Roadway.
Cardinal Rule 2 - ANSWERSPersonnel shall expect, and be vigilant of, rail vehicle
movement in all directions at all times.
Cardinal Rule 3 - ANSWERSRail Operations Control Center (ROCC) shall never
authorize rail vehicle movement in the opposite direction of normal traffic flow without
confirmation of clear track.
Cardinal Rule 4 - ANSWERSThere shall be a dedicated Watchman/Lookout anytime
there is rail vehicle movement within any work zone or when work is conducted on an
"active" revenue track.
Ample Time/Warning - ANSWERSRequires workers to be in a position of safety not less
than 15 seconds before a train or rail equipment moving at the maximum speed
authorized on that track can pass the location of the Roadway Worker, or sufficient
levels of protection that permit workers time to clear the tracks without urgent movement
(i.e. Exclusive Track Occupancy, Inaccessible Track, or Foul time).
Red Hot Spots - ANSWERSLocations on the Roadway where Foul time protection is
required.
Who designates the place of safety? - ANSWERSRoadway Worker in Charge
When can you walk through a Red Hot Spot area on the Roadway? - ANSWERSWhen
the RWIC has requested Foul Time and it has been implemented by ROCC.
The Third Rail carries how much voltage? - ANSWERS750v DC
The Roadway Worker in Charge (RWIC) - ANSWERSA qualified employee whose
training allows them to provide and set up protection for those working on the Roadway.
When you see the Watchman/Lookout holding the 'W' Warning Disk out and up -
ANSWERSIt means you must stay clear of the track.
Cardinal Rule 5 - ANSWERSThere shall be no fouling of the Authority Roadway unless
it is ABSOLUTELY necessary to perform your job.
Cardinal Rule 6 - ANSWERSThere shall be no clearing of Roadway Workers or
equipment to any track at any time.
