Revit Certification exam prep- solved
An electrical designer creates a family and loads it into a project. The designer realizes
that the the category of the family is incorrect. What will this affect? - ANSWER-The
visibility and graphic display of the component.
An electrical designer creates a sheet using a custom titleblock. The designer wants to
include a parameter to indicate the building area. How can this be accomplished? -
ANSWER-Open the titleblock in the Family Editor and add the parameter as a label.
An electrical designer enables Section Box for a 3D view, but the section box is not
visible in the view. Which setting should the designer check? -
ANSWER-Visibility/Graphic Overrides
An electrical designer has a CAD file that they want to reference in a model. The
designer wants to use it to trace conduit runs using the Conduit tool. The CAD file is
also being updated. How should the designer use the CAD file? - ANSWER-Use the
Link CAD tool to link it.
An electrical designer has two active projects. The designer realizes that the Electrical
Settings were not specified correctly in the project template. After updating the settings
in one project, the designer needs the same changes in the other project. What should
the designer do? - ANSWER-Use Transfer Project Standards and select all of the
electrical settings.
An electrical designer is creating a lighting fixture family. The designer wants the lighting
fixture symbol to appear in 3D views when the Detail Level is Coarse and Medium.
What should the designer use to create the symbol in the family? - ANSWER-Model
lines
An electrical designer is creating a lighting fixture schedule and wants to include
information from the spaces in which the lighting fixtures are placed. How can this be
accomplished? - ANSWER-Choose Space in Select available fields from.
An electrical designer is creating a panel schedule template and is trying to drag the
right boundary line to make the panel schedule wider. The designer is unable to do so.
What should the designer do? - ANSWER-Open the Set Template Options and increase
the Total width.
An electrical designer is creating a project parameter for equipment operating weights.
The designer wants to show the appropriate units. Which Discipline and Type of
Parameter should be selected? - ANSWER-Structural/Weight
An electrical designer is creating a receptacle family. The designer places an electrical
connector and sets the System Type to Power - Unbalanced. The designer wants to
, control the Voltage of the electrical connector in the project. How can this be
accomplished? - ANSWER-Associate the Voltage parameter on the connector to a
family parameter.
An electrical designer is creating a receptacle family. The designer wants the receptacle
symbol to appear when the Detail Level is Coarse and Medium, and the receptacle
geometry to appear when the Detail Level is Fine. How can this be accomplished? -
ANSWER-Adjust the Detail Levels in the Family Element Visibility Settings for the
geometry.
An electrical designer is creating a security device family. The designer wants the
security device to be added to a Security system in the project. What should the System
Type of the connector be set to? - ANSWER-Security
An electrical designer is creating an unground conduit plan. Which view setting should
the designer adjust to show conduit beneath the associated level of the view? -
ANSWER-View Range
An electrical designer is creating floor plan views for a 2-story building. The lobby ceiling
on the first floor is 2 feet above the other spaces on the level. The designer wants to
show the lighting above the lobby on the first floor plan view without showing anything
on the second level. How can this be accomplished? - ANSWER-Create a plan region
around the lobby and adjust the View Range.
An electrical designer is modeling conduit and cable trays. The designer wants to check
for clashes. Which tool should be used? - ANSWER-Run Interference Check
An electrical designer is reviewing a building model and wants to see all the circuits
along with the Load for each system. Where can the designer review this information? -
ANSWER-System Browser
An electrical designer is reviewing the Average Estimated Illumination in a space. The
value does not seem correct. The lighting fixtures are placed at the correct location.
Which lighting fixture type parameter should the designer check? - ANSWER-Initial
Intensity
An electrical designer is tagging conduit in a building model. Some of the conduit is at
an angle. The designer wants the tags to rotate with the conduit. What should the
designer do? - ANSWER-Open the tag family and enable Rotate with component.
An electrical designer is working in a project with a linked architectural Revit model. The
designer is unable to select the link. What is causing this condition? - ANSWER-The
Select Links option is disabled.
An electrical designer modifies a panel schedule template, but the panel schedules
associated with the template do not update. What should the designer do? - ANSWER-
An electrical designer creates a family and loads it into a project. The designer realizes
that the the category of the family is incorrect. What will this affect? - ANSWER-The
visibility and graphic display of the component.
An electrical designer creates a sheet using a custom titleblock. The designer wants to
include a parameter to indicate the building area. How can this be accomplished? -
ANSWER-Open the titleblock in the Family Editor and add the parameter as a label.
An electrical designer enables Section Box for a 3D view, but the section box is not
visible in the view. Which setting should the designer check? -
ANSWER-Visibility/Graphic Overrides
An electrical designer has a CAD file that they want to reference in a model. The
designer wants to use it to trace conduit runs using the Conduit tool. The CAD file is
also being updated. How should the designer use the CAD file? - ANSWER-Use the
Link CAD tool to link it.
An electrical designer has two active projects. The designer realizes that the Electrical
Settings were not specified correctly in the project template. After updating the settings
in one project, the designer needs the same changes in the other project. What should
the designer do? - ANSWER-Use Transfer Project Standards and select all of the
electrical settings.
An electrical designer is creating a lighting fixture family. The designer wants the lighting
fixture symbol to appear in 3D views when the Detail Level is Coarse and Medium.
What should the designer use to create the symbol in the family? - ANSWER-Model
lines
An electrical designer is creating a lighting fixture schedule and wants to include
information from the spaces in which the lighting fixtures are placed. How can this be
accomplished? - ANSWER-Choose Space in Select available fields from.
An electrical designer is creating a panel schedule template and is trying to drag the
right boundary line to make the panel schedule wider. The designer is unable to do so.
What should the designer do? - ANSWER-Open the Set Template Options and increase
the Total width.
An electrical designer is creating a project parameter for equipment operating weights.
The designer wants to show the appropriate units. Which Discipline and Type of
Parameter should be selected? - ANSWER-Structural/Weight
An electrical designer is creating a receptacle family. The designer places an electrical
connector and sets the System Type to Power - Unbalanced. The designer wants to
, control the Voltage of the electrical connector in the project. How can this be
accomplished? - ANSWER-Associate the Voltage parameter on the connector to a
family parameter.
An electrical designer is creating a receptacle family. The designer wants the receptacle
symbol to appear when the Detail Level is Coarse and Medium, and the receptacle
geometry to appear when the Detail Level is Fine. How can this be accomplished? -
ANSWER-Adjust the Detail Levels in the Family Element Visibility Settings for the
geometry.
An electrical designer is creating a security device family. The designer wants the
security device to be added to a Security system in the project. What should the System
Type of the connector be set to? - ANSWER-Security
An electrical designer is creating an unground conduit plan. Which view setting should
the designer adjust to show conduit beneath the associated level of the view? -
ANSWER-View Range
An electrical designer is creating floor plan views for a 2-story building. The lobby ceiling
on the first floor is 2 feet above the other spaces on the level. The designer wants to
show the lighting above the lobby on the first floor plan view without showing anything
on the second level. How can this be accomplished? - ANSWER-Create a plan region
around the lobby and adjust the View Range.
An electrical designer is modeling conduit and cable trays. The designer wants to check
for clashes. Which tool should be used? - ANSWER-Run Interference Check
An electrical designer is reviewing a building model and wants to see all the circuits
along with the Load for each system. Where can the designer review this information? -
ANSWER-System Browser
An electrical designer is reviewing the Average Estimated Illumination in a space. The
value does not seem correct. The lighting fixtures are placed at the correct location.
Which lighting fixture type parameter should the designer check? - ANSWER-Initial
Intensity
An electrical designer is tagging conduit in a building model. Some of the conduit is at
an angle. The designer wants the tags to rotate with the conduit. What should the
designer do? - ANSWER-Open the tag family and enable Rotate with component.
An electrical designer is working in a project with a linked architectural Revit model. The
designer is unable to select the link. What is causing this condition? - ANSWER-The
Select Links option is disabled.
An electrical designer modifies a panel schedule template, but the panel schedules
associated with the template do not update. What should the designer do? - ANSWER-
