CCNA 200-301 EXAM QUESTIONS WITH COMPLETE &
ACCURATE SOLUTIONS.
1) Which criteria are used to select the designated router (DR) on an OSPF network
d. d. d. d. d. d. d. d. d. d. d. d. d.
segment? -- Answer ✔✔ the priority of the routers is the criteria; the router with
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
the highest priority becomes the DR.
d. d. d. d. d. d.
2) Which command should you use to disable CDP on a Cisco router -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
no cdp run command
d. d. d. d.
3) What are the two states a switch port must transit from blocking to forwarding
d. d. d. d. d. d. d. d. d. d. d. d. d.
during normal operation of STP? -- Answer ✔✔ listening and learning
d. d. d. d. d. d. d. d. d. d. d.
4) In which type of internal switching process does a frame experience latency greater
d. d. d. d. d. d. d. d. d. d. d. d.
than cut-through but less than store forward internal switching? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d.
fragment-free
d.
5) What is the purpose of virtual desktops? -- Answer ✔✔ It will allow you to
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
implement a uniform user environment.
d. d. d. d. d.
6) Which Cisco IOS show command will generate the output "Serial0 is
d. d. d. d. d. d. d. d. d. d.
administratively down, line protocol is down"? -- Answer ✔✔ show interfaces
d. d. d. d. d. d. d. d. d. d. d.
command
d.
7) What are the five port states that STP uses to define port status on a switch? --
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ Forwarding
d. d. d.
Blocking
Listening
Learning
Disabled
,8) Which cable is used on a router's wide area network (WAN) interface to connect to
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
the serial ports? -- Answer ✔✔ Serial cable
d. d. d. d. d. d. d. d.
9) What should be the default for a host that needs to access a server on a network
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
across the local router? -- Answer ✔✔ IP address of the local interface of the router
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
10) Which Cisco IOS command is used to restore the backup IOS image stored on a
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
TFTP server to the target router? -- Answer ✔✔ copy tftp flash command
d. d. d. d. d. d. d. d. d. d. d. d. d.
11) Which command is executed to verify end-to-end connectivity in an OSPF network?
d. d. d. d. d. d. d. d. d. d. d.
-- Answer ✔✔ The extended ping command
d. d. d. d. d. d. d.
12) What does "C" imply in the show ip route command output? -- Answer ✔✔ directly
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
connected routes
d. d.
13) What port number is the default for DNS? -- Answer ✔✔ 53
d. d. d. d. d. d. d. d. d. d. d.
14) What PPP authentication method never sends the password across the network? --
d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ CHAP
d. d. d.
15) What are your two choices for encryption in the GUI when configuring WPA2? --
d. d. d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ AES and TKIP
d. d. d. d. d.
16) Which routing protocol supports point-to-point and point-to-multipoint
d. d. d. d. d. d.
connections? -- Answer ✔✔ open shortest path first (ospf)
d. d. d. d. d. d. d. d. d.
17) What are the three commands that are used to configure the console password on
d. d. d. d. d. d. d. d. d. d. d. d. d.
the Cisco router? -- Answer ✔✔ line con 0, login, and password
d. d. d. d. d. d. d. d. d. d. d. d.
18) Which Cisco IOS command can be used to verify the routes which are summarized
d. d. d. d. d. d. d. d. d. d. d. d. d.
for an interface? -- Answer ✔✔ show ip protocols command
d. d. d. d. d. d. d. d. d. d.
19) What is the technique used to adjust the number of packets that can be
d. d. d. d. d. d. d. d. d. d. d. d. d.
acknowledged at once by a receiving computer in a transmission? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d. d.
windowing
d.
, 20) What is the effect of applying an ACL with no permit statements on a interface? --
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ all traffic will be blocked
d. d. d. d. d. d. d.
21) Which cipher algorithm does the service password-encryption use? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d.
the Vigenere cipher algorithm
d. d. d. d.
22) What is the length of an Internet Protocol version 6 (IPv6) address? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
128 bits
d. d.
23) What do switches use for Local Area Network (LAN) segmentation? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d.
virtual LANs (VLANs)
d. d. d.
24) Which Cisco IOS command is used on a Catalyst 2950 series switch to view the
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
VLAN database? -- Answer ✔✔ show VLAN brief command
d. d. d. d. d. d. d. d. d.
25) Which Cisco IOS command is used to disable the Cisco Discovery protocol Version
d. d. d. d. d. d. d. d. d. d. d. d.
2 (CDPv2) advertisments? -- Answer ✔✔ no cdp advertise-v2 command
d. d. d. d. d. d. d. d. d. d.
26) In which type of internal switching process does a frame experience maximum
d. d. d. d. d. d. d. d. d. d. d.
d.latency? -- Answer ✔✔ store and forward d. d. d. d. d. d.
27) What is the broadcast MAC address for Ethernet as defined by IEEE? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
FFFF.FFFF.FFFF
d.
28) Which MS-DOS command will enable you to verify the default gateway configuration
d. d. d. d. d. d. d. d. d. d. d.
on a host that is unable to communicate with hosts across a local Cisco router? --
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ ipconfig command
d. d. d. d.
29) Which type of VLAN frames are not tagged while traversing over a trunk link? --
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ native VLAN frames
d. d. d. d. d.
30) In RSTP, what is the non-root port that has the best path to the root bridge on a
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
d.given segment called? -- Answer ✔✔ a designated port
d. d. d. d. d. d. d. d.
ACCURATE SOLUTIONS.
1) Which criteria are used to select the designated router (DR) on an OSPF network
d. d. d. d. d. d. d. d. d. d. d. d. d.
segment? -- Answer ✔✔ the priority of the routers is the criteria; the router with
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
the highest priority becomes the DR.
d. d. d. d. d. d.
2) Which command should you use to disable CDP on a Cisco router -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
no cdp run command
d. d. d. d.
3) What are the two states a switch port must transit from blocking to forwarding
d. d. d. d. d. d. d. d. d. d. d. d. d.
during normal operation of STP? -- Answer ✔✔ listening and learning
d. d. d. d. d. d. d. d. d. d. d.
4) In which type of internal switching process does a frame experience latency greater
d. d. d. d. d. d. d. d. d. d. d. d.
than cut-through but less than store forward internal switching? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d.
fragment-free
d.
5) What is the purpose of virtual desktops? -- Answer ✔✔ It will allow you to
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
implement a uniform user environment.
d. d. d. d. d.
6) Which Cisco IOS show command will generate the output "Serial0 is
d. d. d. d. d. d. d. d. d. d.
administratively down, line protocol is down"? -- Answer ✔✔ show interfaces
d. d. d. d. d. d. d. d. d. d. d.
command
d.
7) What are the five port states that STP uses to define port status on a switch? --
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ Forwarding
d. d. d.
Blocking
Listening
Learning
Disabled
,8) Which cable is used on a router's wide area network (WAN) interface to connect to
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
the serial ports? -- Answer ✔✔ Serial cable
d. d. d. d. d. d. d. d.
9) What should be the default for a host that needs to access a server on a network
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
across the local router? -- Answer ✔✔ IP address of the local interface of the router
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
10) Which Cisco IOS command is used to restore the backup IOS image stored on a
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
TFTP server to the target router? -- Answer ✔✔ copy tftp flash command
d. d. d. d. d. d. d. d. d. d. d. d. d.
11) Which command is executed to verify end-to-end connectivity in an OSPF network?
d. d. d. d. d. d. d. d. d. d. d.
-- Answer ✔✔ The extended ping command
d. d. d. d. d. d. d.
12) What does "C" imply in the show ip route command output? -- Answer ✔✔ directly
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
connected routes
d. d.
13) What port number is the default for DNS? -- Answer ✔✔ 53
d. d. d. d. d. d. d. d. d. d. d.
14) What PPP authentication method never sends the password across the network? --
d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ CHAP
d. d. d.
15) What are your two choices for encryption in the GUI when configuring WPA2? --
d. d. d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ AES and TKIP
d. d. d. d. d.
16) Which routing protocol supports point-to-point and point-to-multipoint
d. d. d. d. d. d.
connections? -- Answer ✔✔ open shortest path first (ospf)
d. d. d. d. d. d. d. d. d.
17) What are the three commands that are used to configure the console password on
d. d. d. d. d. d. d. d. d. d. d. d. d.
the Cisco router? -- Answer ✔✔ line con 0, login, and password
d. d. d. d. d. d. d. d. d. d. d. d.
18) Which Cisco IOS command can be used to verify the routes which are summarized
d. d. d. d. d. d. d. d. d. d. d. d. d.
for an interface? -- Answer ✔✔ show ip protocols command
d. d. d. d. d. d. d. d. d. d.
19) What is the technique used to adjust the number of packets that can be
d. d. d. d. d. d. d. d. d. d. d. d. d.
acknowledged at once by a receiving computer in a transmission? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d. d.
windowing
d.
, 20) What is the effect of applying an ACL with no permit statements on a interface? --
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ all traffic will be blocked
d. d. d. d. d. d. d.
21) Which cipher algorithm does the service password-encryption use? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d.
the Vigenere cipher algorithm
d. d. d. d.
22) What is the length of an Internet Protocol version 6 (IPv6) address? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
128 bits
d. d.
23) What do switches use for Local Area Network (LAN) segmentation? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d.
virtual LANs (VLANs)
d. d. d.
24) Which Cisco IOS command is used on a Catalyst 2950 series switch to view the
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
VLAN database? -- Answer ✔✔ show VLAN brief command
d. d. d. d. d. d. d. d. d.
25) Which Cisco IOS command is used to disable the Cisco Discovery protocol Version
d. d. d. d. d. d. d. d. d. d. d. d.
2 (CDPv2) advertisments? -- Answer ✔✔ no cdp advertise-v2 command
d. d. d. d. d. d. d. d. d. d.
26) In which type of internal switching process does a frame experience maximum
d. d. d. d. d. d. d. d. d. d. d.
d.latency? -- Answer ✔✔ store and forward d. d. d. d. d. d.
27) What is the broadcast MAC address for Ethernet as defined by IEEE? -- Answer ✔✔
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
FFFF.FFFF.FFFF
d.
28) Which MS-DOS command will enable you to verify the default gateway configuration
d. d. d. d. d. d. d. d. d. d. d.
on a host that is unable to communicate with hosts across a local Cisco router? --
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ ipconfig command
d. d. d. d.
29) Which type of VLAN frames are not tagged while traversing over a trunk link? --
d. d. d. d. d. d. d. d. d. d. d. d. d. d.
Answer ✔✔ native VLAN frames
d. d. d. d. d.
30) In RSTP, what is the non-root port that has the best path to the root bridge on a
d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d. d.
d.given segment called? -- Answer ✔✔ a designated port
d. d. d. d. d. d. d. d.
