Page 1 of 19
DANTE CERTIFICATION LEVEL 2 STUDY GUIDE
EXAM LATEST VERSION WITH COMPLETE 300
QUESTIONS AND CORRECT ANSWERS JUST
RELEASED ALREADY PASSED!!!
DANTE CERTIFICATION LEVEL 2 PART A
Question: What does Dante redundancy do? - CORRECT ANSWER✔✔Feature that allows glitch-
free flow of audio through a Secondary network when the Primary network fails for any reason
Question: Can the Secondary (redundant) port on a Dante device be connected to the Primary
network to increase channel count? - CORRECT ANSWER✔✔No. This will cause the network to
fail.
Question: How does one setup Dante redundancy? - CORRECT ANSWER✔✔Connect a second
set of cables and switches to create a network that uses only the Secondary port of Dante
devices
Question: Can the Secondary (redundant) port be configured to daisy chain devices? - CORRECT
ANSWER✔✔Yes, but only on certain Dante devices. Always check.
, Page 2 of 19
Question: When would you select the "Enable Sync to External" box for devices on the DC Clock
Status tab? - CORRECT ANSWER✔✔When a device is either a) connected to an external word
clock, or b) when using the internal clock of a device to drive a Dante option card
Question: Dante [ ... ] use unicast as the default mode of transmission. - CORRECT
ANSWER✔✔does
Question: A unicast network connection is: - CORRECT ANSWER✔✔- Communication that is
only between specific devices on a network
- Default Dante behavior
Question: A multicast network connection is: - CORRECT ANSWER✔✔- One to many
- Useful for solving "Fan out" conditions
Question: A broadcast network connection is: - CORRECT ANSWER✔✔- One to everyone
- Not used by Dante for audio
- A common type of network traffic
Question: A unicast Dante Flow can contain up to [ ... ] different Tx channels of audio from the
same device. - CORRECT ANSWER✔✔4
, Page 3 of 19
Question: How does Dante Controller inform you that multicast is recommended? - CORRECT
ANSWER✔✔With a "Fan out' warning.
Question: Dante Multicast Flows are manually created on an as needed basis. - CORRECT
ANSWER✔✔True
Question: Multicast Flows should be used when you... - CORRECT ANSWER✔✔Wish to connect
a transmitter to multiple receiving devices, typically more than 3
Question: You [ ] have multiple Preferred Masters in a Dante network. - CORRECT
ANSWER✔✔can
Question: Selecting a single Dante device to be the Preferred Master [ ... ] force it to win the
clock master election - CORRECT ANSWER✔✔will
Question: Dante Controller has primary and secondary network connection options. - CORRECT
ANSWER✔✔True
Question: Devices on a Dante network [ ... ] use different latency settings at the same time. -
CORRECT ANSWER✔✔can
DANTE CERTIFICATION LEVEL 2 STUDY GUIDE
EXAM LATEST VERSION WITH COMPLETE 300
QUESTIONS AND CORRECT ANSWERS JUST
RELEASED ALREADY PASSED!!!
DANTE CERTIFICATION LEVEL 2 PART A
Question: What does Dante redundancy do? - CORRECT ANSWER✔✔Feature that allows glitch-
free flow of audio through a Secondary network when the Primary network fails for any reason
Question: Can the Secondary (redundant) port on a Dante device be connected to the Primary
network to increase channel count? - CORRECT ANSWER✔✔No. This will cause the network to
fail.
Question: How does one setup Dante redundancy? - CORRECT ANSWER✔✔Connect a second
set of cables and switches to create a network that uses only the Secondary port of Dante
devices
Question: Can the Secondary (redundant) port be configured to daisy chain devices? - CORRECT
ANSWER✔✔Yes, but only on certain Dante devices. Always check.
, Page 2 of 19
Question: When would you select the "Enable Sync to External" box for devices on the DC Clock
Status tab? - CORRECT ANSWER✔✔When a device is either a) connected to an external word
clock, or b) when using the internal clock of a device to drive a Dante option card
Question: Dante [ ... ] use unicast as the default mode of transmission. - CORRECT
ANSWER✔✔does
Question: A unicast network connection is: - CORRECT ANSWER✔✔- Communication that is
only between specific devices on a network
- Default Dante behavior
Question: A multicast network connection is: - CORRECT ANSWER✔✔- One to many
- Useful for solving "Fan out" conditions
Question: A broadcast network connection is: - CORRECT ANSWER✔✔- One to everyone
- Not used by Dante for audio
- A common type of network traffic
Question: A unicast Dante Flow can contain up to [ ... ] different Tx channels of audio from the
same device. - CORRECT ANSWER✔✔4
, Page 3 of 19
Question: How does Dante Controller inform you that multicast is recommended? - CORRECT
ANSWER✔✔With a "Fan out' warning.
Question: Dante Multicast Flows are manually created on an as needed basis. - CORRECT
ANSWER✔✔True
Question: Multicast Flows should be used when you... - CORRECT ANSWER✔✔Wish to connect
a transmitter to multiple receiving devices, typically more than 3
Question: You [ ] have multiple Preferred Masters in a Dante network. - CORRECT
ANSWER✔✔can
Question: Selecting a single Dante device to be the Preferred Master [ ... ] force it to win the
clock master election - CORRECT ANSWER✔✔will
Question: Dante Controller has primary and secondary network connection options. - CORRECT
ANSWER✔✔True
Question: Devices on a Dante network [ ... ] use different latency settings at the same time. -
CORRECT ANSWER✔✔can
