Welding Module 10 Exam 2025 Questions & Answers with 100% Correct Answers | Verified

Line on a horizontal axis parallel with the earths surface (horizon). Also, is a bubble in a glass vial to check level and plumb. Made from aluminum or magnesium. - Level Line on a vertical axis perpendicular to the earths surface (horizon). - Plumb Preplaced filler metal that is completely fused into the root of the joint during welding. - Consumable Insert Used to measure round stock and to locate the center of the shafts or other round objects. - Vshaped Centering PRIMARY PURPOSE: Check for pipe joint misalignment, although plate joint misalignment can also be checked. - Hi-Lo Gauge Hi-Lo gauges have two prongs, or alignment stops, that are pulled tightly against the inside diameter of the joint so that one stop is flush with each side of the joint. - Checking for internal misalignment of pipe _______ on the feet of the Hi-Lo gauge can be used to measure from the socket to the scribed line to ensure the gap is as specified on the WPS or site quality specifications. Most codes require a minimum of 1/16"(1.6mm) - The scribe-line scale Can be changed to match the specified root opening. - Gap plate