Welding Module 10 Exam 2025 Questions & Answers with 100% Correct Answers | Verified

This can be used to locate the center of shafts or other round objects. - V-shaped head attachment of a combination square The tool that uses a bubble in a glass vial to check level and plumb is what? - level How is the internal misalignment between two sections of pipe to be welded end to end checked? - using a Hi-Lo gauge When using a chain fall to lift or lower weldment parts, what should you do? - Always secure the chain fall to an overhead structural member with an approved sling. What part of a plate alignment tool can be changed to match the specified root opening? - gap plate Although some fit-up tools are often field-fabricated, what part should never be field fabricated? - jack stands When using a chain clamp to fit pipe, the required gap between the root face can be maintained using what? - Spacer What is a fit up tool often used to fit flanges and where heavy duty reforming of the pipe is required? - rim clamp The degree of distortion that happens during welding is directly related to what? - stresses generated during welding What tools are used to properly fit and align weldments and help prevent distortion. - chain clamps, rim clamps and strongbacks An abundant amount of face reinforment reduces what? - the strength of the weld