MA Journeyman questions with complete solutions
graded A+ passed
1. How long must a licensee retain their continuing three renewal cycles
education certificates
2. For building owned or used by the State Board of Examiners of
Common- wealth of Massachusetts, a gas plumbing and gas fitters
fitting permit shall be filed with
3. Who has the authority to revoke a LP
State Board of Examiners of
installer license
Plumber and Gas Fitter
4. When plans and specifications are required, the 30 days
inspector may review the plans, prior to
issuing a permit, for up to:
5. During the renewal cycle, Gas fitters and 6
Undi- luted Petroleum Gas Installers
must complete how many hours of
continuing education
25
6. According to OSHA, when trench is 4'
deep or more a ladder must be
provided as a form of egress if the
trench is longer than how many feet
7. What scenario would qualify a journeyman turned 65 prior to current cycle
gas fitter for an exemption from continuing
educa- tion?
8. How long does and apprentice need to 7 years
retain their w-2 forms after passing the
journeyman exam
9. All plumbing variances submitted to the location of the proposed vari-
the Board must include ance
1/
36
, MA Journeyman questions with complete solutions
graded A+ passed
10. Name the ways a plumbing inspector submitted in person
must ac- cept a properly filled out submitted by mail
plumbing/ gas permit if the town has online permitting
11. A plumbing permit would be not valid if the work 90 days
is not started within how many days
12. what must a journeyman or master License number and
include on all advertising of their designation
business
13. How many hours per license cycle of
continuing 24 education does a plumbing
and gas inspector need
14. How many days does a licensee have to respond 10 business days
to a letter from the board
15. Who appoints the local plumbing and Local building inspector
gas in- spector for each city or town
16. What type of plumbing business is not required sole proprietorship
to get a business license through the
plumbing board
17. A licensed Massachusetts Master Plumber An oflcer of the corporation
sub- mitting an application to become a
corporation must be:
18. is considered proper notifi- Direct communication from
the li-
cation from a licensee to the inspector that work censee to the
inspector
is ready for an inspection
19. A permit must be terminated by Providing written notice
2/
36
, MA Journeyman questions with complete solutions
graded A+ passed
20. A permit is not required for A repair on valve on a
leaking faucet
Clearing stoppage
Adjusting gas appliance controls but
not changing piping arrange-
ment
21. At what pressure does gas piping need to over 5 PSI
be welded at
22. Elevated pressure gas piping must be labeled at every 10 feet
23. when gas is above what pressure it is no .5 PSI
longer considered to be low pressure
24. Installation of unlisted gas appliance equipment with variance from
plumbing board
and accessories is only allowed
25. When installing a gas line underground inside a it must be of same
material as the
building, what is NOT required with the pipe
conduit installed around the gas line
26. When testing a low pressure gas piping duration shall not be more than
system
in excess of one million BTU per hour, what is not 1 hour for every
100' of piping
required
27. Gas regulator vent lines terminating four feet away from any building
outside of a building must be located no
opening or air intake
less than:
28. Flexible gas hoses used to connect portable and 20 feet
mobile industrial appliances shall not exceed:
3/
36
, MA Journeyman questions with complete solutions
graded A+ passed
29. .3 grains
4/
36
graded A+ passed
1. How long must a licensee retain their continuing three renewal cycles
education certificates
2. For building owned or used by the State Board of Examiners of
Common- wealth of Massachusetts, a gas plumbing and gas fitters
fitting permit shall be filed with
3. Who has the authority to revoke a LP
State Board of Examiners of
installer license
Plumber and Gas Fitter
4. When plans and specifications are required, the 30 days
inspector may review the plans, prior to
issuing a permit, for up to:
5. During the renewal cycle, Gas fitters and 6
Undi- luted Petroleum Gas Installers
must complete how many hours of
continuing education
25
6. According to OSHA, when trench is 4'
deep or more a ladder must be
provided as a form of egress if the
trench is longer than how many feet
7. What scenario would qualify a journeyman turned 65 prior to current cycle
gas fitter for an exemption from continuing
educa- tion?
8. How long does and apprentice need to 7 years
retain their w-2 forms after passing the
journeyman exam
9. All plumbing variances submitted to the location of the proposed vari-
the Board must include ance
1/
36
, MA Journeyman questions with complete solutions
graded A+ passed
10. Name the ways a plumbing inspector submitted in person
must ac- cept a properly filled out submitted by mail
plumbing/ gas permit if the town has online permitting
11. A plumbing permit would be not valid if the work 90 days
is not started within how many days
12. what must a journeyman or master License number and
include on all advertising of their designation
business
13. How many hours per license cycle of
continuing 24 education does a plumbing
and gas inspector need
14. How many days does a licensee have to respond 10 business days
to a letter from the board
15. Who appoints the local plumbing and Local building inspector
gas in- spector for each city or town
16. What type of plumbing business is not required sole proprietorship
to get a business license through the
plumbing board
17. A licensed Massachusetts Master Plumber An oflcer of the corporation
sub- mitting an application to become a
corporation must be:
18. is considered proper notifi- Direct communication from
the li-
cation from a licensee to the inspector that work censee to the
inspector
is ready for an inspection
19. A permit must be terminated by Providing written notice
2/
36
, MA Journeyman questions with complete solutions
graded A+ passed
20. A permit is not required for A repair on valve on a
leaking faucet
Clearing stoppage
Adjusting gas appliance controls but
not changing piping arrange-
ment
21. At what pressure does gas piping need to over 5 PSI
be welded at
22. Elevated pressure gas piping must be labeled at every 10 feet
23. when gas is above what pressure it is no .5 PSI
longer considered to be low pressure
24. Installation of unlisted gas appliance equipment with variance from
plumbing board
and accessories is only allowed
25. When installing a gas line underground inside a it must be of same
material as the
building, what is NOT required with the pipe
conduit installed around the gas line
26. When testing a low pressure gas piping duration shall not be more than
system
in excess of one million BTU per hour, what is not 1 hour for every
100' of piping
required
27. Gas regulator vent lines terminating four feet away from any building
outside of a building must be located no
opening or air intake
less than:
28. Flexible gas hoses used to connect portable and 20 feet
mobile industrial appliances shall not exceed:
3/
36
, MA Journeyman questions with complete solutions
graded A+ passed
29. .3 grains
4/
36
