S95 PERSONAL EXAM 2025| BRAND NEW
ACTUAL EXAM WITH 100% VERIFIED
QUESTIONS AND CORRECT SOLUTIONS|
GUARANTEED VALUE PACK| ACE YOUR
GRADES.
1. Which duties can an S-95 Certificate of Fitness holder perform? -
Correct Answer-Visual Inspections Only - of fire alarm system
components and smoke detectors
2. What is the primary purpose of Fire Alarm Systems? - Correct Answer-
To warn building occupants and transmit signals indicating a fire
condition to the Fire Department via central station.
3. What is a Fire Alarm signal? - Correct Answer-The signal initiated by a
fire alarm initiating device such as a manual fire alarm pull station,
smoke detector, water-flow switch, or any device in which their activation
indicates presence of fire.
4. What is a Supervisory Signal? - Correct Answer-A signal indicating that
a system or device being monitored has been compromised or is in an
abnormal state.
1 |Page
, 5. Is the FDNY dispatched for Supervisory Signals? - Correct Answer-No.
The Facility Manager should investigate and correct the supervisory
condition indicated by the FACP.
6. What is a Trouble Signal? - Correct Answer-A signal that indicates a
fault with the fire equipment. It must have an audible signal, distinctive
from alarm signals
7. What is the maximum number of minutes that routine handling should
take?-- from receipt of trouble signal by central station until initiation of
the investigation by telephone. - Correct Answer-FOUR minutes
8. Is the FDNY dispatched for Trouble Signals? - Correct Answer-No.
Trouble Signals aren't indicative of a fire condition.
9. What is an Acknowledge Switch (ACK) ? - Correct Answer-This
switch/button is used to acknowledge alarm, supervisory, or trouble
conditions.
10. Why is an Alarm Silence Switch helpful after an evacuation - while
the source of alarm is being investigated? - Correct Answer-This
switch/button silences audible and visual devices (sirens, bells, gongs)
so it's easier for Emergency Responders to communicate.
2 |Page
ACTUAL EXAM WITH 100% VERIFIED
QUESTIONS AND CORRECT SOLUTIONS|
GUARANTEED VALUE PACK| ACE YOUR
GRADES.
1. Which duties can an S-95 Certificate of Fitness holder perform? -
Correct Answer-Visual Inspections Only - of fire alarm system
components and smoke detectors
2. What is the primary purpose of Fire Alarm Systems? - Correct Answer-
To warn building occupants and transmit signals indicating a fire
condition to the Fire Department via central station.
3. What is a Fire Alarm signal? - Correct Answer-The signal initiated by a
fire alarm initiating device such as a manual fire alarm pull station,
smoke detector, water-flow switch, or any device in which their activation
indicates presence of fire.
4. What is a Supervisory Signal? - Correct Answer-A signal indicating that
a system or device being monitored has been compromised or is in an
abnormal state.
1 |Page
, 5. Is the FDNY dispatched for Supervisory Signals? - Correct Answer-No.
The Facility Manager should investigate and correct the supervisory
condition indicated by the FACP.
6. What is a Trouble Signal? - Correct Answer-A signal that indicates a
fault with the fire equipment. It must have an audible signal, distinctive
from alarm signals
7. What is the maximum number of minutes that routine handling should
take?-- from receipt of trouble signal by central station until initiation of
the investigation by telephone. - Correct Answer-FOUR minutes
8. Is the FDNY dispatched for Trouble Signals? - Correct Answer-No.
Trouble Signals aren't indicative of a fire condition.
9. What is an Acknowledge Switch (ACK) ? - Correct Answer-This
switch/button is used to acknowledge alarm, supervisory, or trouble
conditions.
10. Why is an Alarm Silence Switch helpful after an evacuation - while
the source of alarm is being investigated? - Correct Answer-This
switch/button silences audible and visual devices (sirens, bells, gongs)
so it's easier for Emergency Responders to communicate.
2 |Page
