Contractor Actual exam Questions and 100%
Correct Answers
An owner hires a construction manager for a project. Which of the following is true with
regards to subcontractors? - ✔✔the subcontractors are prime contractors.
In seismic design category C, what is the maximum spacing for vertical reinforcement in
masonry shear walls? - ✔✔10 feet
A concrete block foundation wall that is adequately braced should be cured for a
minimum of how much time before backfilling? - ✔✔48 hours
Which type of mortar should be used for masonry that is installed below grade? -
✔✔type M
What is the maximum distance horizontal reinforcement can be placed from the top of a
masonry partition wall? - ✔✔16 inches
What is the maximum spacing for masonry veneer to supporting wall anchors in non
seismic locales? - ✔✔24 inches on center horizontally and shall support not more
than 2.67 square feet of wall area.
What is the minimum thickness (nominal) for an 8 foot high hollow masonry foundation
wall that is 4 feet below finish grade on the exterior? - ✔✔8 inches
What would be the total amount of Medicare and Social Security taxes that the
employer should withhold on the last week of the year from an employee who
earns$3,000 per week and has worked for the employer the entire year? - ✔✔$43.50
, A permit is obtained on Friday, May 1. The materials are to be delivered May 8. The
materials are needed when labor begins on May 11. It is estimated that 15 days of labor
are required. The crew will work every day, including weekends and holidays. The
project is scheduled to be completed on June 8. How float days are available for the
labor for this project? - ✔✔13
Which of the following would typically be covered by a contractor's comprehensive
general liability insurance policy? - ✔✔Damage to adjoining property from a crane
accident.
A non exempt employee of a contractor covered by the Fair Labor Standards Act works
60 hours during a workweek. The agreement is to pay the employee $400.00 each week
regardless of the number of hours worked. What should be the employee's gross pay for
this workweek? - ✔✔$700.50
A safety net is being used where the working surface is 9 feet in the air. What is the
minimum horizontal distance of the outer edge of the net from the edge of the working
surface? - ✔✔10 feet
AT least how often should employees watch for possible hazards at the job site? -
✔✔Constantly
Who is responsible for ensuring job site safety? - ✔✔the contractor
What is the maximum height above a lower level that a jobsite walkway can be before it
is required by OSHA to have handrails? - ✔✔6 feet
What is the required safety factor for components of a multiple lift rigging assesmbly? -
✔✔5 to 1
Correct Answers
An owner hires a construction manager for a project. Which of the following is true with
regards to subcontractors? - ✔✔the subcontractors are prime contractors.
In seismic design category C, what is the maximum spacing for vertical reinforcement in
masonry shear walls? - ✔✔10 feet
A concrete block foundation wall that is adequately braced should be cured for a
minimum of how much time before backfilling? - ✔✔48 hours
Which type of mortar should be used for masonry that is installed below grade? -
✔✔type M
What is the maximum distance horizontal reinforcement can be placed from the top of a
masonry partition wall? - ✔✔16 inches
What is the maximum spacing for masonry veneer to supporting wall anchors in non
seismic locales? - ✔✔24 inches on center horizontally and shall support not more
than 2.67 square feet of wall area.
What is the minimum thickness (nominal) for an 8 foot high hollow masonry foundation
wall that is 4 feet below finish grade on the exterior? - ✔✔8 inches
What would be the total amount of Medicare and Social Security taxes that the
employer should withhold on the last week of the year from an employee who
earns$3,000 per week and has worked for the employer the entire year? - ✔✔$43.50
, A permit is obtained on Friday, May 1. The materials are to be delivered May 8. The
materials are needed when labor begins on May 11. It is estimated that 15 days of labor
are required. The crew will work every day, including weekends and holidays. The
project is scheduled to be completed on June 8. How float days are available for the
labor for this project? - ✔✔13
Which of the following would typically be covered by a contractor's comprehensive
general liability insurance policy? - ✔✔Damage to adjoining property from a crane
accident.
A non exempt employee of a contractor covered by the Fair Labor Standards Act works
60 hours during a workweek. The agreement is to pay the employee $400.00 each week
regardless of the number of hours worked. What should be the employee's gross pay for
this workweek? - ✔✔$700.50
A safety net is being used where the working surface is 9 feet in the air. What is the
minimum horizontal distance of the outer edge of the net from the edge of the working
surface? - ✔✔10 feet
AT least how often should employees watch for possible hazards at the job site? -
✔✔Constantly
Who is responsible for ensuring job site safety? - ✔✔the contractor
What is the maximum height above a lower level that a jobsite walkway can be before it
is required by OSHA to have handrails? - ✔✔6 feet
What is the required safety factor for components of a multiple lift rigging assesmbly? -
✔✔5 to 1
