2025 ZABBIX CERTIFIED SPECIALIST DAY 2
EXAM LATEST UPDATED 90 QUESTIONS
WITH CORRECT VERIFIED ANSWERS
(EXPERT SOLVED)
1. What will happen to problems if the trigger they depend on is in the
PROB-
LEM state?: They will be suppressed
2. Where can dependencies between triggers be defined?: On the same
host or on different hosts
3. What is a Zabbix agent passive check?: Zabbix server or proxy asks for
a single metric and Zabbix agent sends back the result.
4. What does not matter at all for passive checks?: Host name
5. What must be specified to allow connectivity between Zabbix Server
and Zabbix Agent?: Server parameter must match Zabbix server or proxy
IP address (or subnet).
6. What is the default number of pollers that are started at once?: 5
7. What is the Zabbix server timeout (connection timeout)?: The number
of seconds the Zabbix server will wait for an answer from the agent.
8. What are 2 reasons for installing Zabbix_get?: To gather data from the
Agent, to run a passive test, can be used in custom scripts.
9. What file needs to be edited to allow Zabbix Server to connect to
Zabbix
1/9
, .
Agent?: /etc/zabbix/zabbix_agentd.conf
10. What command allows you to view the list of installed packages on a
Zabbix Agent?: zabbix_get -s 127.0.0.1 -k system.sw.packages[zabbix]
11. Can Zabbix agent be installed on Windows?: Yes
12. What field is mandatory for Zabbix agent to communicate in Active
Mode?: Hostname, it must be defined the same on both the frontend host
& in the zabbix_agentd.conf file.
13. On which port is data from active Agents accepted? And by what
process?: Port 10051, by trapper process.
14. Are interfaces required for Active Agent checks?: No
15. What value in the zabbix_agentd.conf file needs to be updated with the
Zabbix Server or Proxy IP address?: ServerActive
16. What command is used to return the Zabbix Agent hostname?:
zabbix_agentd -t system.hostname.
17. In the zabbix_agentd.conf file, what happens if multiple IP addresses
are listed under the ServerActive field?: It will send data to all listed
servers.
18. How often does the Agent retrieve configuration data from the Zabbix
Server?: On agent start and every 2 minutes.
19. Where does the Zabbix agent store collected values when in active
mode? And how often is the data sent?: Memory buffer (every 5 seconds
by default).
20. Do active checks use an availability icon?: No, must refer to latest data.
21 What must you do after updating the hostname on an agent? And what
is the command to do this?: You must restart the agent using the command
"systemctl restart zabbix-agent".
2/9
EXAM LATEST UPDATED 90 QUESTIONS
WITH CORRECT VERIFIED ANSWERS
(EXPERT SOLVED)
1. What will happen to problems if the trigger they depend on is in the
PROB-
LEM state?: They will be suppressed
2. Where can dependencies between triggers be defined?: On the same
host or on different hosts
3. What is a Zabbix agent passive check?: Zabbix server or proxy asks for
a single metric and Zabbix agent sends back the result.
4. What does not matter at all for passive checks?: Host name
5. What must be specified to allow connectivity between Zabbix Server
and Zabbix Agent?: Server parameter must match Zabbix server or proxy
IP address (or subnet).
6. What is the default number of pollers that are started at once?: 5
7. What is the Zabbix server timeout (connection timeout)?: The number
of seconds the Zabbix server will wait for an answer from the agent.
8. What are 2 reasons for installing Zabbix_get?: To gather data from the
Agent, to run a passive test, can be used in custom scripts.
9. What file needs to be edited to allow Zabbix Server to connect to
Zabbix
1/9
, .
Agent?: /etc/zabbix/zabbix_agentd.conf
10. What command allows you to view the list of installed packages on a
Zabbix Agent?: zabbix_get -s 127.0.0.1 -k system.sw.packages[zabbix]
11. Can Zabbix agent be installed on Windows?: Yes
12. What field is mandatory for Zabbix agent to communicate in Active
Mode?: Hostname, it must be defined the same on both the frontend host
& in the zabbix_agentd.conf file.
13. On which port is data from active Agents accepted? And by what
process?: Port 10051, by trapper process.
14. Are interfaces required for Active Agent checks?: No
15. What value in the zabbix_agentd.conf file needs to be updated with the
Zabbix Server or Proxy IP address?: ServerActive
16. What command is used to return the Zabbix Agent hostname?:
zabbix_agentd -t system.hostname.
17. In the zabbix_agentd.conf file, what happens if multiple IP addresses
are listed under the ServerActive field?: It will send data to all listed
servers.
18. How often does the Agent retrieve configuration data from the Zabbix
Server?: On agent start and every 2 minutes.
19. Where does the Zabbix agent store collected values when in active
mode? And how often is the data sent?: Memory buffer (every 5 seconds
by default).
20. Do active checks use an availability icon?: No, must refer to latest data.
21 What must you do after updating the hostname on an agent? And what
is the command to do this?: You must restart the agent using the command
"systemctl restart zabbix-agent".
2/9
