ASE A6 Test Prep (Electrical & Electronic
Systems) Verified Questions & Answers /
2025.
Terms in this set (177)
A technician connects one Technician A only
lead of a DMM (digital
multimeter) to the positive
(+) terminal of a battery and
the other meter lead to the
"B" terminal of the starter
solenoid and then cranks the
engine. During cranking, the
voltmeter displays a reading
of 878 mV.
Technician A says this
reading indicates the
positive battery cable has
very high resistance.
Technician B says this
reading indicates that the
starter armature is
defective.
Who is right?
Technician A only Technician
B only
Both Technicians A and B
Neither Technician A nor B
,When performing a load test Replace the battery
on a battery, a technician finds
that the battery voltage drops
below specifications. Which of
the following is the MOST
likely repair?
a. Recharge the
batteryand return it to service
b. Recharge the
batteryand retest it
c. Replace the battery
d. Replace the
voltageregulator
,Two technicians are Technician A only
describing battery
charging.
Technician A says to remove
the surface charge from a
recently charged battery and
apply a 300-ampere load
across the adapters for 15
seconds.
Technician B says to remove
the surface charge from
batteries, which have been in
storage.
Who is right?
Technician A only Technician
B only
Both Technicians A and B
Neither Technician A nor B
, A technician connects one Technician A only
lead of a DMM (digital
multimeter) to the positive
(+) terminal of a battery and
the other meter lead to the
"B" terminal of the starter
solenoid and then cranks the
engine. During cranking, the
voltmeter displays a reading
of 878 mV.
Technician A says this
reading indicates the
positive battery cable has
very high resistance.
Technician B says this
reading indicates that the
starter armature is
defective.
Who is right?
Technician A only Technician
B only
Both Technicians A and B
Neither Technician A nor B
Systems) Verified Questions & Answers /
2025.
Terms in this set (177)
A technician connects one Technician A only
lead of a DMM (digital
multimeter) to the positive
(+) terminal of a battery and
the other meter lead to the
"B" terminal of the starter
solenoid and then cranks the
engine. During cranking, the
voltmeter displays a reading
of 878 mV.
Technician A says this
reading indicates the
positive battery cable has
very high resistance.
Technician B says this
reading indicates that the
starter armature is
defective.
Who is right?
Technician A only Technician
B only
Both Technicians A and B
Neither Technician A nor B
,When performing a load test Replace the battery
on a battery, a technician finds
that the battery voltage drops
below specifications. Which of
the following is the MOST
likely repair?
a. Recharge the
batteryand return it to service
b. Recharge the
batteryand retest it
c. Replace the battery
d. Replace the
voltageregulator
,Two technicians are Technician A only
describing battery
charging.
Technician A says to remove
the surface charge from a
recently charged battery and
apply a 300-ampere load
across the adapters for 15
seconds.
Technician B says to remove
the surface charge from
batteries, which have been in
storage.
Who is right?
Technician A only Technician
B only
Both Technicians A and B
Neither Technician A nor B
, A technician connects one Technician A only
lead of a DMM (digital
multimeter) to the positive
(+) terminal of a battery and
the other meter lead to the
"B" terminal of the starter
solenoid and then cranks the
engine. During cranking, the
voltmeter displays a reading
of 878 mV.
Technician A says this
reading indicates the
positive battery cable has
very high resistance.
Technician B says this
reading indicates that the
starter armature is
defective.
Who is right?
Technician A only Technician
B only
Both Technicians A and B
Neither Technician A nor B
