Inspection Mechanic Training and
Certification Exam Complete Questions
And Answers | Solved
ASME Code CORRECT ANSWERS The American Society of Mechanical Engineers
Boiler and Pressure Vessel Code; Section VIII,
Division I, and Section IX of the 1971 and later editions.
ASTM CORRECT ANSWERS The American Society for Testing and Materials.
Acute Area of the Windshield CORRECT ANSWERS The center of the critical area on
the driver's side of the vehicle directly in the
driver's normal line of vision 81/2 inches wide and 51/2 inches high.
Allowable Working Pressure CORRECT ANSWERS The pounds per square inch for
which the container was constructed, or if
conditions have changed, the maximum pressure at specified temperatures permitted at
the most recent inspection
by a certified inspector.
Alteration CORRECT ANSWERS A change in the construction, design, or installation of
a container that affects the strength or safety of
the system.
Auxiliary driving Lamp CORRECT ANSWERS A lighting device mounted to provide
illumination in front of the vehicle and to supplement the upper beam of a standard
headlamp system; it is not intended for use alone or with the lower beam of a standard
headlamp system
Back-Up Lamp CORRECT ANSWERS A lamp used to provide illumination behind the
vehicle and to provide a warning signal when the vehicle is in reverse gear.
Bead CORRECT ANSWERS The part of the tire made of steel wires wrapped or
reinforced by ply cords, that is shaped to fit the rim.
Belt CORRECT ANSWERS A layer made of fabric or other material located under the
tread area.
Bureau CORRECT ANSWERS The Bureau of Motor Vehicles of the Department.
CGA CORRECT ANSWERS The Compressed Gas Association, Inc.; 14501 George
Carter Way, Suite 103, Chantilly, VA 20151.
, Cargo Lamp CORRECT ANSWERS A lamp mounted on a multipurpose passenger
vehicle, truck or bus that provides illumination to load or unload cargo
Certified Inspection Mechanic CORRECT ANSWERS A person who holds a valid
certification card issued by the Bureau certifying that the person is qualified, has passed
all requirements to inspect specific vehicles and holds a valid driver's license for the
correct class of vehicle
Certified Inspector CORRECT ANSWERS A person who holds a certificate issued by
the Boiler Division in the Bureau of Occupation and Industrial Safety within the
Department of Labor and Industry certifying that the person is qualified to inspect
unfired pressure vessels.
Clearance Lamps CORRECT ANSWERS Lamps which show to the front or rear of a
vehicle to indicate overall width and height of a vehicle -- on trucks and buses 80 inches
or more in width.
Commonwealth Inspection Station CORRECT ANSWERS An inspection station
appointed to inspect all types of vehicles, space permitted, owned by and engaged
exclusively in the performance of the official duties of the Federal Government, the
Commonwealth, or a political subdivision of the Commonwealth
Cord CORRECT ANSWERS The strands forming the plies in the tire.
Critical Area of the Windshield CORRECT ANSWERS The part of the vehicle
windshield cleaned by the sweep of the windshield wiper system
dOT CORRECT ANSWERS Department of Transportation
designated Area CORRECT ANSWERS The geographic area which the Department, in
conjunction with the Department of
Environmental Resources, and the United States Environmental Protection Agency, has
identified as an Emission
I/M Program designated area. A copy of the Department's designation is available upon
request from the
Department.
FMVSS CORRECT ANSWERS Federal Motor Vehicle Safety Standards
Fleet Inspection Station CORRECT ANSWERS An inspection station appointed to
inspect all types of vehicles, space permitting, leased by or owned and registered in the
name of the person in whose name the certificate of appointment is issued
Fog Lamps CORRECT ANSWERS Lamps which are used with or in lieu of the lower
beam headlamps to provide illumination under conditions of rain, snow or fog.
Certification Exam Complete Questions
And Answers | Solved
ASME Code CORRECT ANSWERS The American Society of Mechanical Engineers
Boiler and Pressure Vessel Code; Section VIII,
Division I, and Section IX of the 1971 and later editions.
ASTM CORRECT ANSWERS The American Society for Testing and Materials.
Acute Area of the Windshield CORRECT ANSWERS The center of the critical area on
the driver's side of the vehicle directly in the
driver's normal line of vision 81/2 inches wide and 51/2 inches high.
Allowable Working Pressure CORRECT ANSWERS The pounds per square inch for
which the container was constructed, or if
conditions have changed, the maximum pressure at specified temperatures permitted at
the most recent inspection
by a certified inspector.
Alteration CORRECT ANSWERS A change in the construction, design, or installation of
a container that affects the strength or safety of
the system.
Auxiliary driving Lamp CORRECT ANSWERS A lighting device mounted to provide
illumination in front of the vehicle and to supplement the upper beam of a standard
headlamp system; it is not intended for use alone or with the lower beam of a standard
headlamp system
Back-Up Lamp CORRECT ANSWERS A lamp used to provide illumination behind the
vehicle and to provide a warning signal when the vehicle is in reverse gear.
Bead CORRECT ANSWERS The part of the tire made of steel wires wrapped or
reinforced by ply cords, that is shaped to fit the rim.
Belt CORRECT ANSWERS A layer made of fabric or other material located under the
tread area.
Bureau CORRECT ANSWERS The Bureau of Motor Vehicles of the Department.
CGA CORRECT ANSWERS The Compressed Gas Association, Inc.; 14501 George
Carter Way, Suite 103, Chantilly, VA 20151.
, Cargo Lamp CORRECT ANSWERS A lamp mounted on a multipurpose passenger
vehicle, truck or bus that provides illumination to load or unload cargo
Certified Inspection Mechanic CORRECT ANSWERS A person who holds a valid
certification card issued by the Bureau certifying that the person is qualified, has passed
all requirements to inspect specific vehicles and holds a valid driver's license for the
correct class of vehicle
Certified Inspector CORRECT ANSWERS A person who holds a certificate issued by
the Boiler Division in the Bureau of Occupation and Industrial Safety within the
Department of Labor and Industry certifying that the person is qualified to inspect
unfired pressure vessels.
Clearance Lamps CORRECT ANSWERS Lamps which show to the front or rear of a
vehicle to indicate overall width and height of a vehicle -- on trucks and buses 80 inches
or more in width.
Commonwealth Inspection Station CORRECT ANSWERS An inspection station
appointed to inspect all types of vehicles, space permitted, owned by and engaged
exclusively in the performance of the official duties of the Federal Government, the
Commonwealth, or a political subdivision of the Commonwealth
Cord CORRECT ANSWERS The strands forming the plies in the tire.
Critical Area of the Windshield CORRECT ANSWERS The part of the vehicle
windshield cleaned by the sweep of the windshield wiper system
dOT CORRECT ANSWERS Department of Transportation
designated Area CORRECT ANSWERS The geographic area which the Department, in
conjunction with the Department of
Environmental Resources, and the United States Environmental Protection Agency, has
identified as an Emission
I/M Program designated area. A copy of the Department's designation is available upon
request from the
Department.
FMVSS CORRECT ANSWERS Federal Motor Vehicle Safety Standards
Fleet Inspection Station CORRECT ANSWERS An inspection station appointed to
inspect all types of vehicles, space permitting, leased by or owned and registered in the
name of the person in whose name the certificate of appointment is issued
Fog Lamps CORRECT ANSWERS Lamps which are used with or in lieu of the lower
beam headlamps to provide illumination under conditions of rain, snow or fog.
