Basic Rigging - Trade Terms well
solved.
A simple rope-and-pulley system called a ________ is used
to lift loads. - Ans>> block & tackle
__________, a type of rigging hardware, are available in
three basic designs: unshouldered, shouldered, and
swivel. - Ans>> eyebolts
Use a single ring called a(n) __________ to attach multiple
slings to a hoist hook. - Ans>> bull ring
, The signal person uses ____________ to communicate load
navigation directions to the crane operator. - Ans>> ANSI
hand signals
The way a sling is arranged to hold the load is called a
rigging configuration, or ____________. - Ans>> hitch
The ________ is the total amount of what is being lifted. -
Ans>> load
It is important to understand this concept: When ______
decreases, ___________ increases. - Ans>> sling angle;
sling stress
The _________ is the link between the load and the lifting
device. - Ans>> sling
The maximum load weight that a sling is designed to
carry is called _______________. - Ans>> rated capacity
Use a _______________ to attach a sling to a load. - Ans>>
rigging hook
When slings are being pulled sideways by the loads
weight, this ________ adds more stress to the sling. -
Ans>> side pull
solved.
A simple rope-and-pulley system called a ________ is used
to lift loads. - Ans>> block & tackle
__________, a type of rigging hardware, are available in
three basic designs: unshouldered, shouldered, and
swivel. - Ans>> eyebolts
Use a single ring called a(n) __________ to attach multiple
slings to a hoist hook. - Ans>> bull ring
, The signal person uses ____________ to communicate load
navigation directions to the crane operator. - Ans>> ANSI
hand signals
The way a sling is arranged to hold the load is called a
rigging configuration, or ____________. - Ans>> hitch
The ________ is the total amount of what is being lifted. -
Ans>> load
It is important to understand this concept: When ______
decreases, ___________ increases. - Ans>> sling angle;
sling stress
The _________ is the link between the load and the lifting
device. - Ans>> sling
The maximum load weight that a sling is designed to
carry is called _______________. - Ans>> rated capacity
Use a _______________ to attach a sling to a load. - Ans>>
rigging hook
When slings are being pulled sideways by the loads
weight, this ________ adds more stress to the sling. -
Ans>> side pull
