ROPE RESCUE OPS IFSI NEWEST 2025
ACTUAL EXAM COMPLETE QUESTIONS
AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY
GRADED A+||BRAND NEW VERSION!!
A munter can be used as a means of lowering a load
300 lbs or less in an emergency and also for -
....ANSWER...rappelling
When setting a belay at an anchor point, it shall be
kept as close to the load (fall line) as possible to
prevent - ....ANSWER...pendulum affect
When constructing a tandem prusik belay, it is
advisable to use a load releasing hitch in the event
the tandem prusiks become - ....ANSWER...stuck or
jammed
T/F: It is acceptable to anchor yourself to the back of
your harness and place the belay device in the front
lower attachment point in the harness for belay
,operations. This will help maintain the rescuer in an
upright position if they become unconscious. -
....ANSWER...False
T/F: Figure 8 descenders can be used as belay
devices when a rope is placed in the large opening of
the figure 8. - ....ANSWER...False
T/F: A mariners hitch is acceptable for tandem
prusik belays with rescue loads - ....ANSWER...False
When placing tandem triple wrap prusik (T3WP's),
the prusik are placed on the line coming from the
delta or carabiner and the prusik minding pulley
(PMP) that will carry the load with the bridges up
and: - ....ANSWER...both prusiks tied the same
T/F: A belay line is always the first line attached to
the rescuer and the last thing taken off the rescuer.
- ....ANSWER...True
The maximum amount of slack allowed in the belay
line is: - ....ANSWER...1 foot
, T/F: Dynamic rope used for belay operations has a
laid kern construction and is covered under NFPA
1983 - ....ANSWER...False
A bottom belay will - ....ANSWER...will not arrest a
fall if the main line fails.
Engineered shock absorbing equipment is
recommended by NFPA anytime there is a potential
fall factor greater than - ....ANSWER....25
Carabiners used in fall protection equipment
designed for tower climbing shall per OSHA be
designed with: - ....ANSWER...A self closing self
locking design
The best way to prevent a fall by the edge attendant
working with rescuers near the edge is with: -
....ANSWER...Travel restraint securely tied to a fixed
anchor
T/F: Mechanical belay devices, per the manufacture,
do not need to be tied off when not being tended to
by the belay operator, as they are all automatic. -
....ANSWER...False
ACTUAL EXAM COMPLETE QUESTIONS
AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY
GRADED A+||BRAND NEW VERSION!!
A munter can be used as a means of lowering a load
300 lbs or less in an emergency and also for -
....ANSWER...rappelling
When setting a belay at an anchor point, it shall be
kept as close to the load (fall line) as possible to
prevent - ....ANSWER...pendulum affect
When constructing a tandem prusik belay, it is
advisable to use a load releasing hitch in the event
the tandem prusiks become - ....ANSWER...stuck or
jammed
T/F: It is acceptable to anchor yourself to the back of
your harness and place the belay device in the front
lower attachment point in the harness for belay
,operations. This will help maintain the rescuer in an
upright position if they become unconscious. -
....ANSWER...False
T/F: Figure 8 descenders can be used as belay
devices when a rope is placed in the large opening of
the figure 8. - ....ANSWER...False
T/F: A mariners hitch is acceptable for tandem
prusik belays with rescue loads - ....ANSWER...False
When placing tandem triple wrap prusik (T3WP's),
the prusik are placed on the line coming from the
delta or carabiner and the prusik minding pulley
(PMP) that will carry the load with the bridges up
and: - ....ANSWER...both prusiks tied the same
T/F: A belay line is always the first line attached to
the rescuer and the last thing taken off the rescuer.
- ....ANSWER...True
The maximum amount of slack allowed in the belay
line is: - ....ANSWER...1 foot
, T/F: Dynamic rope used for belay operations has a
laid kern construction and is covered under NFPA
1983 - ....ANSWER...False
A bottom belay will - ....ANSWER...will not arrest a
fall if the main line fails.
Engineered shock absorbing equipment is
recommended by NFPA anytime there is a potential
fall factor greater than - ....ANSWER....25
Carabiners used in fall protection equipment
designed for tower climbing shall per OSHA be
designed with: - ....ANSWER...A self closing self
locking design
The best way to prevent a fall by the edge attendant
working with rescuers near the edge is with: -
....ANSWER...Travel restraint securely tied to a fixed
anchor
T/F: Mechanical belay devices, per the manufacture,
do not need to be tied off when not being tended to
by the belay operator, as they are all automatic. -
....ANSWER...False
