ROPE RESCUE OPPS IFSI ACTUAL
EXAM LATEST PREMIUM EXPERT
UPDATE 2025 BRAND NEW EXAM
QUESTIONS WITH 100% CORRECT
ANSWERS, ALL GRADED A+
GUARANTEED SUCCESS.
All riggin shall have how many checks prior to Loading? - ANSWER-✅3
All equip. that falls 3 ft onto a hard surface shall be checked for: - ANSWER-✅Burs,
sharp edges, dirt, contaminates, lose parts and deformaties
Rope deployed from the anchor point to the ground should be deployed: - ANSWER-
✅So only the amount needed is with a dynamic anchor
Helmets used for rope rescue should be: - ANSWER-✅Lighter in weight
Rope gloves shall be - ANSWER-✅Sturdy formfitting gloves with a leather palm
T/F: Fall protection (travel restraint) at the edge shall be long enough for the edge
attendant to go over the edge and no farther - ANSWER-✅False
A class one harness is designed to stop rescuer when he: - ANSWER-✅Reaches the
edge
T/F: Class two harnesses are designed for 600 lb loads and will not keep the rescuer
in an up-right position if they become unconscious. - ANSWER-✅True
, Class three harnesses are: - ANSWER-✅Designed to keep the rescuer or victim in an
up-right position
T/F: A person that falls in a harness and is suspended and unable to stand on a solid
surface should lift their legs into a sitting position and avoid moving. - ANSWER-
✅True
T/F: When working in a harness with free mobility a person should keep your legs
moving as much as possible - ANSWER-✅True
T/F: A person that falls and is trapped and unable to lift their legs should squeeze
their legs legs every 5 seconds until help arrives - ANSWER-✅True
The 1st medical consideration for a victim in a class three harness that falls and
becomes unconscious is: - ANSWER-✅Airway patency
When a person is rescued from harness suspension they should be: - ANSWER-
✅Assessed, ABC's, immobilization and transported in a sitting position
All harness construction and testing standards are covered in NFPA: - ANSWER-
✅1983
T/F: Personnel at a rescue scene whether they are workers, IC, safety officer all have
the ability to call a stop during rope rescue operations if they see an unsafe
operation - ANSWER-✅True
A helmet used for repor rescue should be an approved light weight helmet with a: -
ANSWER-✅3 point strap position under the chin
Care and maintenance of all rescue equipment should be per: - ANSWER-✅the
helmet's manufacturer recommendations
T/F: Care should be taken when rope is under tension not to allow a second rope
under tension (a line) to run across the stationary rope under tension. This will cause
a nylon on nylon situation that can burn through a rope quickly - ANSWER-✅True
Most rope failures are caused by: - ANSWER-✅Abrasion
Rope that will lose strength when wet is: - ANSWER-✅Nylon
Polyester handles shock loads: - ANSWER-✅Not as well as nylon
Pylopropylene rope: - ANSWER-✅Has a good chemical resistance
Examples of natural fiber ropes include: - ANSWER-✅Cotton, sisal , manila
EXAM LATEST PREMIUM EXPERT
UPDATE 2025 BRAND NEW EXAM
QUESTIONS WITH 100% CORRECT
ANSWERS, ALL GRADED A+
GUARANTEED SUCCESS.
All riggin shall have how many checks prior to Loading? - ANSWER-✅3
All equip. that falls 3 ft onto a hard surface shall be checked for: - ANSWER-✅Burs,
sharp edges, dirt, contaminates, lose parts and deformaties
Rope deployed from the anchor point to the ground should be deployed: - ANSWER-
✅So only the amount needed is with a dynamic anchor
Helmets used for rope rescue should be: - ANSWER-✅Lighter in weight
Rope gloves shall be - ANSWER-✅Sturdy formfitting gloves with a leather palm
T/F: Fall protection (travel restraint) at the edge shall be long enough for the edge
attendant to go over the edge and no farther - ANSWER-✅False
A class one harness is designed to stop rescuer when he: - ANSWER-✅Reaches the
edge
T/F: Class two harnesses are designed for 600 lb loads and will not keep the rescuer
in an up-right position if they become unconscious. - ANSWER-✅True
, Class three harnesses are: - ANSWER-✅Designed to keep the rescuer or victim in an
up-right position
T/F: A person that falls in a harness and is suspended and unable to stand on a solid
surface should lift their legs into a sitting position and avoid moving. - ANSWER-
✅True
T/F: When working in a harness with free mobility a person should keep your legs
moving as much as possible - ANSWER-✅True
T/F: A person that falls and is trapped and unable to lift their legs should squeeze
their legs legs every 5 seconds until help arrives - ANSWER-✅True
The 1st medical consideration for a victim in a class three harness that falls and
becomes unconscious is: - ANSWER-✅Airway patency
When a person is rescued from harness suspension they should be: - ANSWER-
✅Assessed, ABC's, immobilization and transported in a sitting position
All harness construction and testing standards are covered in NFPA: - ANSWER-
✅1983
T/F: Personnel at a rescue scene whether they are workers, IC, safety officer all have
the ability to call a stop during rope rescue operations if they see an unsafe
operation - ANSWER-✅True
A helmet used for repor rescue should be an approved light weight helmet with a: -
ANSWER-✅3 point strap position under the chin
Care and maintenance of all rescue equipment should be per: - ANSWER-✅the
helmet's manufacturer recommendations
T/F: Care should be taken when rope is under tension not to allow a second rope
under tension (a line) to run across the stationary rope under tension. This will cause
a nylon on nylon situation that can burn through a rope quickly - ANSWER-✅True
Most rope failures are caused by: - ANSWER-✅Abrasion
Rope that will lose strength when wet is: - ANSWER-✅Nylon
Polyester handles shock loads: - ANSWER-✅Not as well as nylon
Pylopropylene rope: - ANSWER-✅Has a good chemical resistance
Examples of natural fiber ropes include: - ANSWER-✅Cotton, sisal , manila
