ROPE RESCUE OPS IFSI EXAM LATEST 2025 WITH ACTUAL
QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY
GRADED A+ 100% GUARANTEED PASS!
All riggin shall have how many checks prior to Loading? - CORRECT ANSWER-
3
All equip. that falls 3 ft onto a hard surface shall be checked for: - CORRECT
ANSWER-Burs, sharp edges, dirt, contaminates, lose parts and deformaties
Rope deployed from the anchor point to the ground should be deployed: -
CORRECT ANSWER-So only the amount needed is with a dynamic anchor
Helmets used for rope rescue should be: - CORRECT ANSWER-Lighter in
weight
Rope gloves shall be - CORRECT ANSWER-Sturdy formfitting gloves with a
leather palm
T/F: Fall protection (travel restraint) at the edge shall be long enough for the
edge attendant to go over the edge and no farther - CORRECT ANSWER-False
A class one harness is designed to stop rescuer when he: - CORRECT
ANSWER-Reaches the edge
, T/F: Class two harnesses are designed for 600 lb loads and will not keep the
rescuer in an up-right position if they become unconscious. - CORRECT
ANSWER-True
Class three harnesses are: - CORRECT ANSWER-Designed to keep the rescuer
or victim in an up-right position
T/F: A person that falls in a harness and is suspended and unable to stand on a
solid surface should lift their legs into a sitting position and avoid moving. -
CORRECT ANSWER-True
T/F: When working in a harness with free mobility a person should keep your
legs moving as much as possible - CORRECT ANSWER-True
T/F: A person that falls and is trapped and unable to lift their legs should
squeeze their legs legs every 5 seconds until help arrives - CORRECT
ANSWER-True
The 1st medical consideration for a victim in a class three harness that falls and
becomes unconscious is: - CORRECT ANSWER-Airway patency
When a person is rescued from harness suspension they should be: -
CORRECT ANSWER-Assessed, ABC's, immobilization and transported in a
sitting position
All harness construction and testing standards are covered in NFPA: -
CORRECT ANSWER-1983
QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY
GRADED A+ 100% GUARANTEED PASS!
All riggin shall have how many checks prior to Loading? - CORRECT ANSWER-
3
All equip. that falls 3 ft onto a hard surface shall be checked for: - CORRECT
ANSWER-Burs, sharp edges, dirt, contaminates, lose parts and deformaties
Rope deployed from the anchor point to the ground should be deployed: -
CORRECT ANSWER-So only the amount needed is with a dynamic anchor
Helmets used for rope rescue should be: - CORRECT ANSWER-Lighter in
weight
Rope gloves shall be - CORRECT ANSWER-Sturdy formfitting gloves with a
leather palm
T/F: Fall protection (travel restraint) at the edge shall be long enough for the
edge attendant to go over the edge and no farther - CORRECT ANSWER-False
A class one harness is designed to stop rescuer when he: - CORRECT
ANSWER-Reaches the edge
, T/F: Class two harnesses are designed for 600 lb loads and will not keep the
rescuer in an up-right position if they become unconscious. - CORRECT
ANSWER-True
Class three harnesses are: - CORRECT ANSWER-Designed to keep the rescuer
or victim in an up-right position
T/F: A person that falls in a harness and is suspended and unable to stand on a
solid surface should lift their legs into a sitting position and avoid moving. -
CORRECT ANSWER-True
T/F: When working in a harness with free mobility a person should keep your
legs moving as much as possible - CORRECT ANSWER-True
T/F: A person that falls and is trapped and unable to lift their legs should
squeeze their legs legs every 5 seconds until help arrives - CORRECT
ANSWER-True
The 1st medical consideration for a victim in a class three harness that falls and
becomes unconscious is: - CORRECT ANSWER-Airway patency
When a person is rescued from harness suspension they should be: -
CORRECT ANSWER-Assessed, ABC's, immobilization and transported in a
sitting position
All harness construction and testing standards are covered in NFPA: -
CORRECT ANSWER-1983
