BNSF STUDY UPDATED Exam Questions
and CORRECT Answers
The purpose of a contractor safety action plan is? - CORRECT ANSWER - location specific
plan for carrying out elements of a company's safety management system
A contractor employer must ensure that its safety action plan(s) are: - CORRECT ANSWER -
All:
maintained with each work group on BNSF railway property
Available withe the BNSF project Representative or Employee in charge
Uploaded to Contractor Orientation at www.bnsfcontractor.com
The 24 hour BNSF emergency number to call if an incident or injury occurs is 1-800-832-5452
and is located in the first page of the contractor safety action plan and your contractor orientation
badge - CORRECT ANSWER - True
1. C
2. D
3. A - CORRECT ANSWER -
Which of the following is NOT a step in a job Safety Briefing? - CORRECT ANSWER -
Verify job location for the following week
should be:
Discussing the task at hand
Delegate and discuss life saving processes
Establish cues to pause the work
Which of the following is Not a form of personal protection? - CORRECT ANSWER -
sunglasses
These are:
, Hard Hat, Safety toed work boots
reflective vest
Good housekeeping and material storage can prevent injuries and includes the following activies.
- CORRECT ANSWER - All:
Keeping walk ways clear of hazards
Posting approperiate warning signs to identify hazards
Properly storing flammable and combstible liquids and gases
Latter - CORRECT ANSWER - Ascending/Descending - An exposure that exists when a
person or an object may be unexpectedly struck.
Door
1. C
2. B
3. D
4. LATTER/ DOOR. TRAIN/ BEAM - CORRECT ANSWER - Pinch Point - An exposure
that exists when a person or an object may be unexpectedly struck
Train - CORRECT ANSWER - Line of fire/ Release of Energy - An exposure that exists when
a person or an object may be unexpectedly struck
Beam - CORRECT ANSWER - Walking/ Path of Travel - An exposure that exists along a path
of travel that could cause a slip, Trip, or Fall
When an incident or injury occurs on BNSF property, it must be reported to the BNSF railway
project representative - CORRECT ANSWER - True
and CORRECT Answers
The purpose of a contractor safety action plan is? - CORRECT ANSWER - location specific
plan for carrying out elements of a company's safety management system
A contractor employer must ensure that its safety action plan(s) are: - CORRECT ANSWER -
All:
maintained with each work group on BNSF railway property
Available withe the BNSF project Representative or Employee in charge
Uploaded to Contractor Orientation at www.bnsfcontractor.com
The 24 hour BNSF emergency number to call if an incident or injury occurs is 1-800-832-5452
and is located in the first page of the contractor safety action plan and your contractor orientation
badge - CORRECT ANSWER - True
1. C
2. D
3. A - CORRECT ANSWER -
Which of the following is NOT a step in a job Safety Briefing? - CORRECT ANSWER -
Verify job location for the following week
should be:
Discussing the task at hand
Delegate and discuss life saving processes
Establish cues to pause the work
Which of the following is Not a form of personal protection? - CORRECT ANSWER -
sunglasses
These are:
, Hard Hat, Safety toed work boots
reflective vest
Good housekeeping and material storage can prevent injuries and includes the following activies.
- CORRECT ANSWER - All:
Keeping walk ways clear of hazards
Posting approperiate warning signs to identify hazards
Properly storing flammable and combstible liquids and gases
Latter - CORRECT ANSWER - Ascending/Descending - An exposure that exists when a
person or an object may be unexpectedly struck.
Door
1. C
2. B
3. D
4. LATTER/ DOOR. TRAIN/ BEAM - CORRECT ANSWER - Pinch Point - An exposure
that exists when a person or an object may be unexpectedly struck
Train - CORRECT ANSWER - Line of fire/ Release of Energy - An exposure that exists when
a person or an object may be unexpectedly struck
Beam - CORRECT ANSWER - Walking/ Path of Travel - An exposure that exists along a path
of travel that could cause a slip, Trip, or Fall
When an incident or injury occurs on BNSF property, it must be reported to the BNSF railway
project representative - CORRECT ANSWER - True
