© EVERLY 2025 ALL RIGHTS RESERVED.
Electrical Module 2 Exam Questions And
Answers 100% Pass.
What type of rubber protective equipment is made of natural rubber or synthetic - Answer✔type
1
when the insulating capability of protective equipment is subject to damage it requires what -
Answer✔requires it own protection like leather gauntlets
Insulating gloves must be inspected by the user ______. - Answer✔before each use
the least effective method of preventing risk is the use of - Answer✔ppe
the three basic causes of incidents are unsafe acts, unsafe equipment and .... - Answer✔unsafe
conditions
lock out tag out is an example of - Answer✔administrative control
per osha standards an employee who is exposed to high voltage hazard must wear what type of
hard hat - Answer✔class E
the osha lock out tag out rule that protects workers from - Answer✔exposed to hazardous energy
use
NFPA 70 E provides practical guidance in - Answer✔electrical
which of the following is true when working near cranes - Answer✔only individuals trained in
rigging for lifting material should operate the crane
if the wooden handle on a tool is cracked, it may - Answer✔tag the tool out of service and take it
out of service
Under strict safety guidelines, which of the following should be used to discharge capacitors
before working on de-energized circuits? - Answer✔safety shortening probe
situations that put a worker at risk due to demands, of task conditions, and worker attitude -
Answer✔error pre cursors
OSHA CFR 1910 is the standard for ______. - Answer✔General Industry
which factor determines the outcome of an electrical shock - Answer✔current
1|Page
Electrical Module 2 Exam Questions And
Answers 100% Pass.
What type of rubber protective equipment is made of natural rubber or synthetic - Answer✔type
1
when the insulating capability of protective equipment is subject to damage it requires what -
Answer✔requires it own protection like leather gauntlets
Insulating gloves must be inspected by the user ______. - Answer✔before each use
the least effective method of preventing risk is the use of - Answer✔ppe
the three basic causes of incidents are unsafe acts, unsafe equipment and .... - Answer✔unsafe
conditions
lock out tag out is an example of - Answer✔administrative control
per osha standards an employee who is exposed to high voltage hazard must wear what type of
hard hat - Answer✔class E
the osha lock out tag out rule that protects workers from - Answer✔exposed to hazardous energy
use
NFPA 70 E provides practical guidance in - Answer✔electrical
which of the following is true when working near cranes - Answer✔only individuals trained in
rigging for lifting material should operate the crane
if the wooden handle on a tool is cracked, it may - Answer✔tag the tool out of service and take it
out of service
Under strict safety guidelines, which of the following should be used to discharge capacitors
before working on de-energized circuits? - Answer✔safety shortening probe
situations that put a worker at risk due to demands, of task conditions, and worker attitude -
Answer✔error pre cursors
OSHA CFR 1910 is the standard for ______. - Answer✔General Industry
which factor determines the outcome of an electrical shock - Answer✔current
1|Page
