BECC Mod 2 Exam Questions and Answers Latest Update (Already Passed)

BECC Mod 2 Exam Questions and Answers Latest Update (Already Passed) How long are engineering legal records retained onboard for? - Answers 3 years How long are operational logs maintained for? - Answers 6 months what is the record where all speed changes for each individual shaft are recorded? - Answers bell book what log is maintained in dc central - Answers damage control closure log What log records day to day events in the engineering plant - Answers the engineering log responsible for physical security of the main reduction gear? - Answers engineer officer watch fire and flooding get reported to - Answers sounding and security watch in port watch in charge of physical security of the ship and takes control of security forces - Answers CDO What program is used to safeguard the ship from sabotage? - Answers physical security program What device is a positive stop used to prevent inadvertent manipulation? - Answers a locking device the use of EOSS is - Answers mandatory What are the 3 parts of an EOSS? - Answers the EOSS users guide, EOP, EOCC What 2 actions of the EOCC that must be memorized - Answers controlling and immediate actions 4 actions EOCC - Answers controlling, immediate, supplementary, restore casualty used to alert personnel to an action that if not strictly adhered to may result in injury to personnel - Answers warning who uses master plant procedures - Answers EOOW, OOD, SPACE SUPERVISOR table that displays proper valve alignment for various tanks - Answers tank tables What part of EOP provides tank capacities - Answers tank status diagram What document provides standardized procedures tailored to each ship - Answers EOSS What chart helps keep track of what equipment is on line - Answers status chart why is oil in bilges considered hazardous - Answers generate vapors that can ignite with a spark or open flame parts per million of oily waste that is sufficient to cause a sheen - Answers 15-20 Mark 2 spill kit location - Answers main deck complete discontinuation of all discharges of oily waste - Answers OPA manual details safety precautions for handling asbestos - Answers asbestos control program how long is a gas free certificate good for - Answers 8 hours document posted at entrance of any tank or void not normally manned - Answers gas free certificate ORM stands for - Answers operational risk management 5 steps of ORM - Answers identify, assess, making risk decisions, implement controls, supervise material used to seal moving joints - Answers packing material used to seal fixed joints - Answers gasket high temp, high pressure - Answers raised face low temp, low pressure - Answers flat face What digit in 4 digit symbol indicates if material is used for a mixed joint or moving joint - Answers 1st digit What is the purpose of the EOCC - Answers Procedures for responding to and controlling commonly occurring casualties What are the four basic actions of a casualty procedure - Answers Control actions Immediate actions Supplement actions Restoration actions Where is the master copy of the EOSS located on board your ship - Answers Engineering log room What is the difference between simplex gauge and a duplex gauge? - Answers Simplex one bourbon tube, one needle, the displayed pressure is from one connection Duplex two bourbon tubes, two needles and the displayed pressure is from two connections What is the purpose of the gauge calibration program? - Answers To ensure gauge calibrations is within the prescribe limitations with the least amount of equipment down time What is the purpose of the differential tube diagram - Answers To measure the difference in pressure from two different locations How is the temp measured with the liquid-in-glass thermometer - Answers In Celsius or Fahrenheit What information is recorded in the Engineer Bell Book - Answers A records information regarding the movement of the ships propellers What Information is recorded in the Engineering log - Answers Records a daily record of important events and data pertaining to the Engineering department and the operating of the ships engineering system How are corrections made to a log - Answers By drawing a single line through the original entry such that it remain legible Who is allowed to make changes in the log - Answers Only the watch stander required to sign the log is permitted to make corrections What is the purpose of the physical security program - Answers To safeguard the ship and ships company from sabotage, compromise, terrorism, and other criminal activity. Main propulsion and major auxiliary spaces, both import and underway, must be kept or continuously manned - Answers Locked All safety valves must be locked with a padlock to prevent the in authorized of settings - Answers Changing Supervisors should Inspect spaces to ensure that they are locked or properly m