Iron Worker / Shear Safety Set
Exam Tested Questions & Reviewed
Correct Detailed Answers
New Update!!
1. Iron Worker Shears - ANSWER Next to the oxy booths and is hydrualic
2. When cutting 1/4 inch thick material, the maximum width to be cut on the
ironworker is: - ANSWER 14 Inches
3. A sliding is provided when several pieces need to be sheared the same size.
- ANSWER Stop
4. Do not attempt to punch a part of a hole. Only punch holes. - ANSWER
Full
5. Add cutting oil to the blade after every cuts. - ANSWER 10
6. The capacity for shearing angle iron is x 3" x3". - ANSWER 1/4"
7. Keep fingers clear of the: - ANSWER Clamp
Exam Tested Questions & Reviewed
Correct Detailed Answers
New Update!!
1. Iron Worker Shears - ANSWER Next to the oxy booths and is hydrualic
2. When cutting 1/4 inch thick material, the maximum width to be cut on the
ironworker is: - ANSWER 14 Inches
3. A sliding is provided when several pieces need to be sheared the same size.
- ANSWER Stop
4. Do not attempt to punch a part of a hole. Only punch holes. - ANSWER
Full
5. Add cutting oil to the blade after every cuts. - ANSWER 10
6. The capacity for shearing angle iron is x 3" x3". - ANSWER 1/4"
7. Keep fingers clear of the: - ANSWER Clamp
