ASE G1 Certification Study Guide: Key Concepts and
Practice
Replace the rear springs - correct answer ✔✔The ride (curb) height on the rear of the vehicle is found to
be too low. The best corrective action would be to:
Control body roll - correct answer ✔✔The role of a stabilizer (sway) bar is to:
Warped brake rotors - correct answer ✔✔A vehicle with front disc brakes shudders when the brakes are
applied. Which of these could be the cause?
4.24 ohms - correct answer ✔✔How many amps will flow through a circuit with 3.3 ohms of resistance if
14.0 volts are applied?
Worn piston rings - correct answer ✔✔Blue exhaust smoke can be caused by:
Leaking head gasket - correct answer ✔✔White/gray exhaust smoke can be caused by:
Coolant is being burned in the combustion chamber - correct answer ✔✔What does white/gray exhaust
smoke mean?
Middle of the head - correct answer ✔✔When torquing cylinder head bolts, where do you start?
Outside and work in towards the middle - correct answer ✔✔When removing cylinder head bolts, where
do you start?
Worn shifter forks - correct answer ✔✔Which of these could cause a manual trans-axle to jump out of
gear?
R-12 - correct answer ✔✔Which of the refrigerants was used in the older model vehicles?
Practice
Replace the rear springs - correct answer ✔✔The ride (curb) height on the rear of the vehicle is found to
be too low. The best corrective action would be to:
Control body roll - correct answer ✔✔The role of a stabilizer (sway) bar is to:
Warped brake rotors - correct answer ✔✔A vehicle with front disc brakes shudders when the brakes are
applied. Which of these could be the cause?
4.24 ohms - correct answer ✔✔How many amps will flow through a circuit with 3.3 ohms of resistance if
14.0 volts are applied?
Worn piston rings - correct answer ✔✔Blue exhaust smoke can be caused by:
Leaking head gasket - correct answer ✔✔White/gray exhaust smoke can be caused by:
Coolant is being burned in the combustion chamber - correct answer ✔✔What does white/gray exhaust
smoke mean?
Middle of the head - correct answer ✔✔When torquing cylinder head bolts, where do you start?
Outside and work in towards the middle - correct answer ✔✔When removing cylinder head bolts, where
do you start?
Worn shifter forks - correct answer ✔✔Which of these could cause a manual trans-axle to jump out of
gear?
R-12 - correct answer ✔✔Which of the refrigerants was used in the older model vehicles?
