ICC Vapor Recovery – VT exam 2025 with
verified answers
Type of sealant you should you use on a Phil-Tite Ball Float nipple: - ** VERIFIED
ANSWERS🔰 ✔✔Pipe dope
Number of open valves on the clean air separator: - ** VERIFIED ANSWERS🔰 ✔✔One
You must be CERTIFIED by Healy to re-connect a Healy breakaway, True or False? - **
VERIFIED ANSWERS🔰 ✔✔False
The type of pressure gauge is recommended to test Healy Vac - ** VERIFIED ANSWERS🔰
✔✔SYSA gauge measuring 0-100 WC
On new construction, after July 1, 2004, Can you install an in-ground Spill Bucket? - **
VERIFIED ANSWERS🔰 ✔✔YES-When Piping is monitored and with VAC
According to Executive Order 201 - Healy P/V Valve should be torqued at - ** VERIFIED
ANSWERS🔰 ✔✔20-50 ft-lbs
For a fire to burn, these (3) three primary elements must exist: - ** VERIFIED ANSWERS🔰
✔✔Fuel, Oxygen, Ignition Source
When working with Electrical - Lock Out Tag Out procedures are under these guidelines. -
** VERIFIED ANSWERS🔰 ✔✔CAL-OSHA
, Organization that certifies vapor recovery systems. - ** VERIFIED ANSWERS🔰 ✔✔CARB
or ARB
According to RP 500, a level II technician may NOT inspect this part. - ** VERIFIED
ANSWERS🔰 ✔✔Replace VP 1000 Healy Pump
where hanging hardware repairs must be tracked. - ** VERIFIED ANSWERS🔰 ✔✔GDF
maintenance log
approved sealant when assembling a Phil-Tite Drop Tube. - ** VERIFIED ANSWERS🔰
✔✔JB-Kwik
Material direct bury OPW container sleeve shall be made of. - ** VERIFIED ANSWERS🔰
✔✔Stainless steel
What P/V vent cap shall be tightened to. - ** VERIFIED ANSWERS🔰 ✔✔20-50 ft lbs
From dispenser to manifold - 2" diameter vapor piping ( 2" ID) and From manifold to tank -
3" diameter vapor piping (3" ID) - ** VERIFIED ANSWERS🔰 ✔✔Vapor piping
What is the maximum run for vapor piping? - ** VERIFIED ANSWERS🔰 ✔✔No
maximum run
How you know a nozzle spout is bad. - ** VERIFIED ANSWERS🔰 ✔✔'BAD O-rinqs
According to PEI RP 300, on a balance Stage II vapor recovery system nozzle, Vapors
typically flow in what direction of the coaxial hose? - ** VERIFIED ANSWERS🔰 ✔✔The
outside pathway
verified answers
Type of sealant you should you use on a Phil-Tite Ball Float nipple: - ** VERIFIED
ANSWERS🔰 ✔✔Pipe dope
Number of open valves on the clean air separator: - ** VERIFIED ANSWERS🔰 ✔✔One
You must be CERTIFIED by Healy to re-connect a Healy breakaway, True or False? - **
VERIFIED ANSWERS🔰 ✔✔False
The type of pressure gauge is recommended to test Healy Vac - ** VERIFIED ANSWERS🔰
✔✔SYSA gauge measuring 0-100 WC
On new construction, after July 1, 2004, Can you install an in-ground Spill Bucket? - **
VERIFIED ANSWERS🔰 ✔✔YES-When Piping is monitored and with VAC
According to Executive Order 201 - Healy P/V Valve should be torqued at - ** VERIFIED
ANSWERS🔰 ✔✔20-50 ft-lbs
For a fire to burn, these (3) three primary elements must exist: - ** VERIFIED ANSWERS🔰
✔✔Fuel, Oxygen, Ignition Source
When working with Electrical - Lock Out Tag Out procedures are under these guidelines. -
** VERIFIED ANSWERS🔰 ✔✔CAL-OSHA
, Organization that certifies vapor recovery systems. - ** VERIFIED ANSWERS🔰 ✔✔CARB
or ARB
According to RP 500, a level II technician may NOT inspect this part. - ** VERIFIED
ANSWERS🔰 ✔✔Replace VP 1000 Healy Pump
where hanging hardware repairs must be tracked. - ** VERIFIED ANSWERS🔰 ✔✔GDF
maintenance log
approved sealant when assembling a Phil-Tite Drop Tube. - ** VERIFIED ANSWERS🔰
✔✔JB-Kwik
Material direct bury OPW container sleeve shall be made of. - ** VERIFIED ANSWERS🔰
✔✔Stainless steel
What P/V vent cap shall be tightened to. - ** VERIFIED ANSWERS🔰 ✔✔20-50 ft lbs
From dispenser to manifold - 2" diameter vapor piping ( 2" ID) and From manifold to tank -
3" diameter vapor piping (3" ID) - ** VERIFIED ANSWERS🔰 ✔✔Vapor piping
What is the maximum run for vapor piping? - ** VERIFIED ANSWERS🔰 ✔✔No
maximum run
How you know a nozzle spout is bad. - ** VERIFIED ANSWERS🔰 ✔✔'BAD O-rinqs
According to PEI RP 300, on a balance Stage II vapor recovery system nozzle, Vapors
typically flow in what direction of the coaxial hose? - ** VERIFIED ANSWERS🔰 ✔✔The
outside pathway
