FANUC Certification Exam Latest 2024 Complete
170 Actual Exam Questions with Correct Verified
Answers/ Graded A+
What key is depressed to switch between the different jog methods? -
Correct Answer - COORD
What two buttons display the Jog Menu - Correct Answer - Shift + COORD
What type of memory is saved when performing an Image Backup? -
Correct Answer - FROM and SRAM
Singularity error can be corrected by moving? - Correct Answer - Joint 5
(+/-) 10 degrees
Where is the default Tool center Point? - Correct Answer - Center of the
faceplate
What type of I/O handles communication between the controller and the
robot - Correct Answer - Robot I/O
Positional data is dependent on what two frames? - Correct Answer - User
and tool
pg. 1
,Which type of instruction defines for the robot how to move, where to move,
how fast to move, and how to stop? - Correct Answer - Motion instruction
Which type of pasting will paste the motion instructions in order and
renumber the Position ID's based on first available Position ID? - Correct
Answer - Position
Which mode limits all cartesian speed to less than 250 mm/sec and joint
speed to less than 10%? - Correct Answer - T1 Mode
Which motion type moves the TCP in a straight line from the start position
to the destination position? - Correct Answer - Linear
Which position must the DEADMAN switch be held to enable motion? -
Correct Answer – Centered
What are the 2 menus from which you can save Teach Pendant Files? -
Correct Answer - Select and File
Which of the following hard keys would bring the menu item ABORT ALL to
the TP screen? - Correct Answer - FCTN (function)
Which softkey allows you to enter additional program instructions into a TP
program? - Correct Answer - [INST]
What is the suggested type of motion used to move the robot to a Home
position? - Correct Answer - Joint
Before forcing an input, it must be______? - Correct Answer - Simulated
pg. 2
, What type of memory is saved when performing a File Backup? - Correct
Answer - SRAM only
The six point method of defining a tool frame defines the location and
______ of a tool frame? - Correct Answer - Orientation
What are the two possible actions of an IF/SELECT statement? - Correct
Answer - JMP LBL & CALL
The motion option OFFSET, PR [x] is offset relative to the orientation of
what frame? - Correct Answer - User
Which macro assignments will execute a macro in manual mode? - Correct
Answer - UK, SU, MF
When entering the cell with robot power on, what should you do? - Correct
Answer - Take the teach pendant in with you and have it turned on
Positional Data is dependent on what two frames? - Correct Answer - Tool
and user
When you use a linear motion type in program motion instruction, what
does the robot base its path on? - Correct Answer - The Tool center point
What are the two possible outcomes a TPP IF instruction? - Correct Answer
- Call a program and Jump to a label
pg. 3
170 Actual Exam Questions with Correct Verified
Answers/ Graded A+
What key is depressed to switch between the different jog methods? -
Correct Answer - COORD
What two buttons display the Jog Menu - Correct Answer - Shift + COORD
What type of memory is saved when performing an Image Backup? -
Correct Answer - FROM and SRAM
Singularity error can be corrected by moving? - Correct Answer - Joint 5
(+/-) 10 degrees
Where is the default Tool center Point? - Correct Answer - Center of the
faceplate
What type of I/O handles communication between the controller and the
robot - Correct Answer - Robot I/O
Positional data is dependent on what two frames? - Correct Answer - User
and tool
pg. 1
,Which type of instruction defines for the robot how to move, where to move,
how fast to move, and how to stop? - Correct Answer - Motion instruction
Which type of pasting will paste the motion instructions in order and
renumber the Position ID's based on first available Position ID? - Correct
Answer - Position
Which mode limits all cartesian speed to less than 250 mm/sec and joint
speed to less than 10%? - Correct Answer - T1 Mode
Which motion type moves the TCP in a straight line from the start position
to the destination position? - Correct Answer - Linear
Which position must the DEADMAN switch be held to enable motion? -
Correct Answer – Centered
What are the 2 menus from which you can save Teach Pendant Files? -
Correct Answer - Select and File
Which of the following hard keys would bring the menu item ABORT ALL to
the TP screen? - Correct Answer - FCTN (function)
Which softkey allows you to enter additional program instructions into a TP
program? - Correct Answer - [INST]
What is the suggested type of motion used to move the robot to a Home
position? - Correct Answer - Joint
Before forcing an input, it must be______? - Correct Answer - Simulated
pg. 2
, What type of memory is saved when performing a File Backup? - Correct
Answer - SRAM only
The six point method of defining a tool frame defines the location and
______ of a tool frame? - Correct Answer - Orientation
What are the two possible actions of an IF/SELECT statement? - Correct
Answer - JMP LBL & CALL
The motion option OFFSET, PR [x] is offset relative to the orientation of
what frame? - Correct Answer - User
Which macro assignments will execute a macro in manual mode? - Correct
Answer - UK, SU, MF
When entering the cell with robot power on, what should you do? - Correct
Answer - Take the teach pendant in with you and have it turned on
Positional Data is dependent on what two frames? - Correct Answer - Tool
and user
When you use a linear motion type in program motion instruction, what
does the robot base its path on? - Correct Answer - The Tool center point
What are the two possible outcomes a TPP IF instruction? - Correct Answer
- Call a program and Jump to a label
pg. 3
