Basic Safety (Construction Site Safety
Orientation) Study Guide Exam Fully
Solved.
Companies with strong safety cultures usually have lower _____. - Answer turnover
Which of these is a true statement regarding safety? - Answer Safety is a learned behavior and attitude.
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of _____. - Answer
unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing each step for
potential hazards is called a _____. - Answer job safety analysis
A measure of the probability, consequences, and exposure related to an event is referred to as _____. -
Answer risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to
_____. - Answer cover the opening and label the cover
The D-ring or support point on a safety harness should be placed _____. - Answer between the
shoulder blades
A personal fall arrest system should be inspected monthly by a _____. - Answer competent person
Lanyards that have no shock-absorbing features are used for _____. - Answer positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the point
where
the ladder touches the platform or roof by at least _____. - Answer 3 feet (91 cm)
Orientation) Study Guide Exam Fully
Solved.
Companies with strong safety cultures usually have lower _____. - Answer turnover
Which of these is a true statement regarding safety? - Answer Safety is a learned behavior and attitude.
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of _____. - Answer
unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing each step for
potential hazards is called a _____. - Answer job safety analysis
A measure of the probability, consequences, and exposure related to an event is referred to as _____. -
Answer risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to
_____. - Answer cover the opening and label the cover
The D-ring or support point on a safety harness should be placed _____. - Answer between the
shoulder blades
A personal fall arrest system should be inspected monthly by a _____. - Answer competent person
Lanyards that have no shock-absorbing features are used for _____. - Answer positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the point
where
the ladder touches the platform or roof by at least _____. - Answer 3 feet (91 cm)
