CAD Exam #1
1. @ - ANS-The symbol ____ is placed earlier than the coordinate factor if it's far to be
relative to the closing factor entered.
2. 2 - ANS-How many special coordinate frames does AutoCad have?
3. 3-D - ANS-Viewpoints are maximum useful when working with a ____ version.
4. Angles - ANS-___ are used to present the perspective among two surfaces or
capabilities of a part.
5. Auxiliary views - ANS-_____ are used to reveal the authentic form of functions that aren't
parallel to any of the principle planes of projection
6. block - ANS-What command permits you to create a grouping of objects that can be
used time and again in the cutting-edge drawing?
7. Bottom left - ANS-Where is the coordinate role of your cursor displayed?
8. Wreck line - ANS-Lines which are used to reveal imaginary breaks in gadgets. They are
generally made from a chain of connecting arcs. The line kind is continuous and the line
weight is usually thick (zero.Five-0.6mm)
9. cartesian(x,y) and polar(r,theta) - ANS-What are the 2 primary coordinate systems used?
10. Center strains - ANS-Lines that constitute axes of symmetry (long sprint - quick dash
and thin - zero.3mm)
11. coordinate factors - ANS-In AutoCad, traces, circles, and and so on. Are defined with the
aid of ______.
12. COORDS - ANS-What command controls which coordinates are stated.
13. Reducing aircraft line
14. visible line
15. hidden line
16. middle line - ANS-List the strains so as of significance.
17. Cutting aircraft traces - ANS-Lines that are used to reveal where an imaginary cut has
been made through the object so that it will view indoors functions. The line is phantom
and may be very thick (zero.60 to 0.80mm). Arrows are places at both ends of the
reducing plane line to signify the path of sight.
18. Specific drawing - ANS-An orthographic projection, entire with all of the dimensions and
specs had to manufacture the item.
19. Size and extentsion - ANS-____ and ____ lines are used to show the dimensions of an
object (non-stop - 0.3mm)
20. size choice - ANS-your choice of dimensions will at once have an impact on the
technique used to manufacture the component
21. size line - ANS-A line terminated by way of arrowheads, which indicated the direction
and quantity of measurement
22. dimensions - ANS-___ are given inside the shape of linear distances, angles, and notes.
23. Display - ANS-prints the whole thing that you may see, in the interim, within the drawing
region
1. @ - ANS-The symbol ____ is placed earlier than the coordinate factor if it's far to be
relative to the closing factor entered.
2. 2 - ANS-How many special coordinate frames does AutoCad have?
3. 3-D - ANS-Viewpoints are maximum useful when working with a ____ version.
4. Angles - ANS-___ are used to present the perspective among two surfaces or
capabilities of a part.
5. Auxiliary views - ANS-_____ are used to reveal the authentic form of functions that aren't
parallel to any of the principle planes of projection
6. block - ANS-What command permits you to create a grouping of objects that can be
used time and again in the cutting-edge drawing?
7. Bottom left - ANS-Where is the coordinate role of your cursor displayed?
8. Wreck line - ANS-Lines which are used to reveal imaginary breaks in gadgets. They are
generally made from a chain of connecting arcs. The line kind is continuous and the line
weight is usually thick (zero.Five-0.6mm)
9. cartesian(x,y) and polar(r,theta) - ANS-What are the 2 primary coordinate systems used?
10. Center strains - ANS-Lines that constitute axes of symmetry (long sprint - quick dash
and thin - zero.3mm)
11. coordinate factors - ANS-In AutoCad, traces, circles, and and so on. Are defined with the
aid of ______.
12. COORDS - ANS-What command controls which coordinates are stated.
13. Reducing aircraft line
14. visible line
15. hidden line
16. middle line - ANS-List the strains so as of significance.
17. Cutting aircraft traces - ANS-Lines that are used to reveal where an imaginary cut has
been made through the object so that it will view indoors functions. The line is phantom
and may be very thick (zero.60 to 0.80mm). Arrows are places at both ends of the
reducing plane line to signify the path of sight.
18. Specific drawing - ANS-An orthographic projection, entire with all of the dimensions and
specs had to manufacture the item.
19. Size and extentsion - ANS-____ and ____ lines are used to show the dimensions of an
object (non-stop - 0.3mm)
20. size choice - ANS-your choice of dimensions will at once have an impact on the
technique used to manufacture the component
21. size line - ANS-A line terminated by way of arrowheads, which indicated the direction
and quantity of measurement
22. dimensions - ANS-___ are given inside the shape of linear distances, angles, and notes.
23. Display - ANS-prints the whole thing that you may see, in the interim, within the drawing
region
