ITNW-1313 Computer
Virtualization Exam Study Set
With Complete Solution
What is the decimal form of the following binary IP address?
11001110.00111010.10101010.01000011 - Answer 206.58.170.67
Match each decimal value on the left with the corresponding hexadecimal value on the
right. Not all decimal values have a corresponding hexadecimal value. - Answer 11 - 17
B - 11
D - 13
F - 15
C - 12
10 - 16
Drag each binary subnet mask on the left to its appropriate decimal equivalent on the
right. - Answer 255.0.0.0 - 11111111.00000000.00000000.00000000
255.255.255.128 - 11111111.11111111.11111111.10000000
255.224.0.0 - 11111111.11100000.00000000.00000000
255.255.0.0 - 11111111.11111111.00000000.00000000
255.255.255.252 - 11111111.11111111.11111111.11111100
Which of the following are valid IP addresses? (Select three.) - Answer 224.0.0.1,
137.65.1.1, 172.17.1.3
Your network uses a network address of 137.65.0.0 with a subnet mask of 255.255.0.0.
How many IP addresses are available to assign to network hosts on this network? -
Answer 65534
A host has an address of 100.55.177.99/16. Which of the following is the broadcast
address for the subnet? - Answer 100.55.255.255
Your network has a network address of 172.17.0.0 with a subnet mask of 255.255.255.0.
Which of the following are true concerning this network? (Select two.) - Answer 254 IP
,addresses can be assigned to host devices., 172.17.0.255 is the network broadcast
address.
Which of the following best describes the purpose of using subnets? - Answer Subnets
divide an IP network address into multiple network addresses.
You have a small network with a single subnet connected to the internet, as shown
below. The router has been assigned the two addresses shown.
You need to manually configure the workstation to connect to the network. The
workstation should use RouterA as the default gateway and DNS1 as the DNS server
address.
From the drop-down menu options, select the appropriate parameters to configure the
workstation's TCP/IP settings. - Answer IP address - 192.168.12.46
Subnet mask - 255.255.255.240
Default gateway - 192.168.12.34
DNS server - 198.162.1.22
Which of the following devices is MOST LIKELY to be assigned a public IP address? -
Answer A router that connects your home network to the internet.
You manage a network that has multiple internal subnets. You connect a workstation to
the 192.168.1.0/24 subnet.
This workstation cannot communicate with any other host on the network. You run
ipconfig /all and see the following:
Ethernet adapter Local Area Connection:Connection-specific DNS Suffix. :
mydomain.localDescription . . . . . . . : Broadcom network adapterPhysical Address . . . . .
: 00-AA-BB-CC-74-EFDHCP Enabled. . . . . . . : NoAutoconfiguration Enabled . . : YesIPv4
Address. . . . . . . : 192.168.2.102(Preferred)Subnet Mask . . . . . . . : 255.255.255.0Default
Gateway. . . . . . : 192.168.1.1DNS Servers . . . . . . . : 192.168.2.20
What is the MOST likely cause of the problem? - Answer Incorrect IP address
Which command should you use to see how a network interface is configured in the
command prompt? - Answer ipconfig /all
Which of the following is needed for clients to communicate with hosts outside of the
local subnet? - Answer Default gateway
You administer a network with Windows Server 2022, UNIX servers, and Windows 10,
and Macintosh clients. A Windows computer user calls you one day and says that he is
unable to access resources on the network. You type ipconfig on the user's computer
and receive the following output:
,0 Ethernet adapter:
IP address. . . . . . . . . : 169.254.1.17Subnet Mask . . . . . . . . : 255.255.0.0Default Gateway
......:
You also check your NIC and see that the link light is on.
What might the problem be in this scenario? - Answer An unavailable DHCP server
You are a network technician for a small consulting firm. One of your users is
complaining that they are unable to connect to the local intranet site.
After some troubleshooting, you've determined that the intranet site can be connected
to by using the IP address but not the hostname.
Which of the following would be the MOST likely reason for this? - Answer Incorrect DNS
settings
You manage a network that has multiple internal subnets. You connect a workstation to
the 192.168.1.0/24 subnet.
This workstation can communicate with some hosts on the private network, but not with
other hosts. You run ipconfig /all and see the following:
Ethernet adapter Local Area Connection:Connection-specific DNS Suffix . :
mydomain.localDescription . . . . . . . : Broadcom network adapterPhysical Address. . . . .
. : 00-AA-BB-CC-74-EFDHCP Enabled . . . . . . . : NoAutoconfiguration Enabled. . . :
YesIPv4 Address . . . . . . . : 192.168.1.102(Preferred)Subnet Mask . . . . . . . :
255.255.255.0Default Gateway. . . . . . . . . : 192.168.2.1DNS Servers. . . . . . . . . . . :
192.168.2.20
What is the most likely cause of the problem? - Answer Incorrect default gateway
Which of the following identifies both the logical host and logical network addresses? -
Answer IP address
You manage a network that has multiple internal subnets. You connect a workstation to
the 192.168.1.0/24 subnet.
This workstation can communicate with some hosts on the private network, but not with
other hosts. You run ipconfig /all and see the following:
Ethernet adapter Local Area Connection:Connection-specific DNS Suffix . :
mydomain.localDescription . . . . . . . : Broadcom network adapterPhysical Address. . . . .
. : 00-AA-BB-CC-74-EFDHCP Enabled . . . . . . . : NoAutoconfiguration Enabled. . . :
YesIPv4 Address . . . . . . . : 192.168.1.102(Preferred)Subnet Mask. . . . . . . . :
255.255.0.0Default Gateway . . . . . . : 192.168.1.1DNS Servers . . . . . . . :
192.168.1.20192.168.1.27
What is the MOST likely cause of the problem? - Answer Incorrect subnet mask
, Which two commands do you use to force a new IP configuration? - Answer ipconfig
/release, ipconfig /renew
You are a network technician for a small consulting firm. Many users have reported
issues with accessing the network.
After some initial troubleshooting, you discover that many devices have the same IP
address assigned or incorrect IP configurations.
Which of the following would be the MOST likely cause for this? - Answer Rogue DHCP
server
When you enter a ping command at the command prompt how may echo packets are
sent? - Answer 4
You're troubleshooting an IP addressing problem and issue a command to view the
system's TCP/IP configuration. The command you use produces the following output:
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500inet6
fe80::2a0:83ff:fe30:57a%fxp0 prefixlen 64 scopeid 0x1inet 192.168.1.235 netmask
0xfffffc00 broadcast 255.255.255.255ether 00:a0:83:30:05:7amedia: Ethernet autoselect
(100baseTX <full-duplex>)status: activelo0:
flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384inet6 ::1 prefixlen
128inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7inet 127.0.0.1 netmask 0xff000000
Which of the following operating systems are you working on? - Answer Linux
You've been called in to troubleshoot a connectivity problem on a newly installed
Windows Server system. The system is operating well and is able to communicate with
other systems on the local network. However, it's unable to access any systems on
other segments of the corporate network.
You suspect that the system's default gateway parameter hasn't been configured or may
be configured incorrectly. Which of the following utilities are you MOST likely to use to
view the system's default gateway information? - Answer ipconfig
Which TCP/IP utility gives you the following output? - Answer ipconfig
Which command should you use to verify that TCP/IP is correctly installed and
configured on the local host? - Answer ping 127.0.0.1
You work in an office that uses Linux and Windows servers. The network uses the
TCP/IP protocol.
You're sitting at a workstation that uses Windows 10, but an application that you're
using is unable to contact a Windows server named FileSrv2.
Which command can you use to determine whether your computer can still contact the
server? - Answer ping
Virtualization Exam Study Set
With Complete Solution
What is the decimal form of the following binary IP address?
11001110.00111010.10101010.01000011 - Answer 206.58.170.67
Match each decimal value on the left with the corresponding hexadecimal value on the
right. Not all decimal values have a corresponding hexadecimal value. - Answer 11 - 17
B - 11
D - 13
F - 15
C - 12
10 - 16
Drag each binary subnet mask on the left to its appropriate decimal equivalent on the
right. - Answer 255.0.0.0 - 11111111.00000000.00000000.00000000
255.255.255.128 - 11111111.11111111.11111111.10000000
255.224.0.0 - 11111111.11100000.00000000.00000000
255.255.0.0 - 11111111.11111111.00000000.00000000
255.255.255.252 - 11111111.11111111.11111111.11111100
Which of the following are valid IP addresses? (Select three.) - Answer 224.0.0.1,
137.65.1.1, 172.17.1.3
Your network uses a network address of 137.65.0.0 with a subnet mask of 255.255.0.0.
How many IP addresses are available to assign to network hosts on this network? -
Answer 65534
A host has an address of 100.55.177.99/16. Which of the following is the broadcast
address for the subnet? - Answer 100.55.255.255
Your network has a network address of 172.17.0.0 with a subnet mask of 255.255.255.0.
Which of the following are true concerning this network? (Select two.) - Answer 254 IP
,addresses can be assigned to host devices., 172.17.0.255 is the network broadcast
address.
Which of the following best describes the purpose of using subnets? - Answer Subnets
divide an IP network address into multiple network addresses.
You have a small network with a single subnet connected to the internet, as shown
below. The router has been assigned the two addresses shown.
You need to manually configure the workstation to connect to the network. The
workstation should use RouterA as the default gateway and DNS1 as the DNS server
address.
From the drop-down menu options, select the appropriate parameters to configure the
workstation's TCP/IP settings. - Answer IP address - 192.168.12.46
Subnet mask - 255.255.255.240
Default gateway - 192.168.12.34
DNS server - 198.162.1.22
Which of the following devices is MOST LIKELY to be assigned a public IP address? -
Answer A router that connects your home network to the internet.
You manage a network that has multiple internal subnets. You connect a workstation to
the 192.168.1.0/24 subnet.
This workstation cannot communicate with any other host on the network. You run
ipconfig /all and see the following:
Ethernet adapter Local Area Connection:Connection-specific DNS Suffix. :
mydomain.localDescription . . . . . . . : Broadcom network adapterPhysical Address . . . . .
: 00-AA-BB-CC-74-EFDHCP Enabled. . . . . . . : NoAutoconfiguration Enabled . . : YesIPv4
Address. . . . . . . : 192.168.2.102(Preferred)Subnet Mask . . . . . . . : 255.255.255.0Default
Gateway. . . . . . : 192.168.1.1DNS Servers . . . . . . . : 192.168.2.20
What is the MOST likely cause of the problem? - Answer Incorrect IP address
Which command should you use to see how a network interface is configured in the
command prompt? - Answer ipconfig /all
Which of the following is needed for clients to communicate with hosts outside of the
local subnet? - Answer Default gateway
You administer a network with Windows Server 2022, UNIX servers, and Windows 10,
and Macintosh clients. A Windows computer user calls you one day and says that he is
unable to access resources on the network. You type ipconfig on the user's computer
and receive the following output:
,0 Ethernet adapter:
IP address. . . . . . . . . : 169.254.1.17Subnet Mask . . . . . . . . : 255.255.0.0Default Gateway
......:
You also check your NIC and see that the link light is on.
What might the problem be in this scenario? - Answer An unavailable DHCP server
You are a network technician for a small consulting firm. One of your users is
complaining that they are unable to connect to the local intranet site.
After some troubleshooting, you've determined that the intranet site can be connected
to by using the IP address but not the hostname.
Which of the following would be the MOST likely reason for this? - Answer Incorrect DNS
settings
You manage a network that has multiple internal subnets. You connect a workstation to
the 192.168.1.0/24 subnet.
This workstation can communicate with some hosts on the private network, but not with
other hosts. You run ipconfig /all and see the following:
Ethernet adapter Local Area Connection:Connection-specific DNS Suffix . :
mydomain.localDescription . . . . . . . : Broadcom network adapterPhysical Address. . . . .
. : 00-AA-BB-CC-74-EFDHCP Enabled . . . . . . . : NoAutoconfiguration Enabled. . . :
YesIPv4 Address . . . . . . . : 192.168.1.102(Preferred)Subnet Mask . . . . . . . :
255.255.255.0Default Gateway. . . . . . . . . : 192.168.2.1DNS Servers. . . . . . . . . . . :
192.168.2.20
What is the most likely cause of the problem? - Answer Incorrect default gateway
Which of the following identifies both the logical host and logical network addresses? -
Answer IP address
You manage a network that has multiple internal subnets. You connect a workstation to
the 192.168.1.0/24 subnet.
This workstation can communicate with some hosts on the private network, but not with
other hosts. You run ipconfig /all and see the following:
Ethernet adapter Local Area Connection:Connection-specific DNS Suffix . :
mydomain.localDescription . . . . . . . : Broadcom network adapterPhysical Address. . . . .
. : 00-AA-BB-CC-74-EFDHCP Enabled . . . . . . . : NoAutoconfiguration Enabled. . . :
YesIPv4 Address . . . . . . . : 192.168.1.102(Preferred)Subnet Mask. . . . . . . . :
255.255.0.0Default Gateway . . . . . . : 192.168.1.1DNS Servers . . . . . . . :
192.168.1.20192.168.1.27
What is the MOST likely cause of the problem? - Answer Incorrect subnet mask
, Which two commands do you use to force a new IP configuration? - Answer ipconfig
/release, ipconfig /renew
You are a network technician for a small consulting firm. Many users have reported
issues with accessing the network.
After some initial troubleshooting, you discover that many devices have the same IP
address assigned or incorrect IP configurations.
Which of the following would be the MOST likely cause for this? - Answer Rogue DHCP
server
When you enter a ping command at the command prompt how may echo packets are
sent? - Answer 4
You're troubleshooting an IP addressing problem and issue a command to view the
system's TCP/IP configuration. The command you use produces the following output:
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500inet6
fe80::2a0:83ff:fe30:57a%fxp0 prefixlen 64 scopeid 0x1inet 192.168.1.235 netmask
0xfffffc00 broadcast 255.255.255.255ether 00:a0:83:30:05:7amedia: Ethernet autoselect
(100baseTX <full-duplex>)status: activelo0:
flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384inet6 ::1 prefixlen
128inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7inet 127.0.0.1 netmask 0xff000000
Which of the following operating systems are you working on? - Answer Linux
You've been called in to troubleshoot a connectivity problem on a newly installed
Windows Server system. The system is operating well and is able to communicate with
other systems on the local network. However, it's unable to access any systems on
other segments of the corporate network.
You suspect that the system's default gateway parameter hasn't been configured or may
be configured incorrectly. Which of the following utilities are you MOST likely to use to
view the system's default gateway information? - Answer ipconfig
Which TCP/IP utility gives you the following output? - Answer ipconfig
Which command should you use to verify that TCP/IP is correctly installed and
configured on the local host? - Answer ping 127.0.0.1
You work in an office that uses Linux and Windows servers. The network uses the
TCP/IP protocol.
You're sitting at a workstation that uses Windows 10, but an application that you're
using is unable to contact a Windows server named FileSrv2.
Which command can you use to determine whether your computer can still contact the
server? - Answer ping
