©BRAINBARTER EXAM SOLUTIONS 2024/2025
ALL RIGHTS RESERVED.
CDC 3E251 - Volume 2 Exam Questions And
Correct Answers 100% Pass
If you choose to spread materials in layers, you should stop the truck where you want to start
the spread, position the dump control levers, and - Answers✔Raise the bed enough to break
the material free
When properly equipped, a front-end loader can perform tasks associated with each operation
task EXCEPT - Answers✔Trailer operations
What defect are you looking for when inspecting loader buckets without teeth? -
Answers✔Wear of the cutting edges and end bits
What function can the front-end loader NOT perform when equipped with a multipurpose
bucket? - Answers✔Dragline
What front-end loader bucket control is used to raise and lower the bucket? - Answers✔Lift
control lever
Which front-end loader control regulates the transmission speed? - Answers✔Range control
lever
1|Page
, ©BRAINBARTER EXAM SOLUTIONS 2024/2025
ALL RIGHTS RESERVED.
How should you backfill a trench when using a front-end loader with a narrow bucket? -
Answers✔Backfill the area from an angle
What must you do before performing any maintenance action on a front-end loader? -
Answers✔Turn the loader off and set the parking brake
What advantage does a compact track loader (CTL) have over a standard front-end loader? -
Answers✔Can operate in a smaller area
How do you spin a compact track loader (CTL) around within its own body length? -
Answers✔Move the travel controls in opposite directions
If you release the skid-steer loader travel controls levers, - Answers✔Equipment will stop
moving
You ensure good sweeping action and avoid bystanders or damaging equipment when using the
skid-steer loader with the sweeper attachment by using a broom pattern - Answers✔Two to
three inches wide
How are MOST attachments controlled once the auxiliary hydraulics are activated in the
compact track loader (CTL)? - Answers✔Toggle switches on the travel controls
What distance in feet is the efficient operating range of a scraper? - Answers✔300
What four phases of operation make up the work cycle in any scraper operation? -
Answers✔Loading, hauling, spreading, and returning
2|Page
ALL RIGHTS RESERVED.
CDC 3E251 - Volume 2 Exam Questions And
Correct Answers 100% Pass
If you choose to spread materials in layers, you should stop the truck where you want to start
the spread, position the dump control levers, and - Answers✔Raise the bed enough to break
the material free
When properly equipped, a front-end loader can perform tasks associated with each operation
task EXCEPT - Answers✔Trailer operations
What defect are you looking for when inspecting loader buckets without teeth? -
Answers✔Wear of the cutting edges and end bits
What function can the front-end loader NOT perform when equipped with a multipurpose
bucket? - Answers✔Dragline
What front-end loader bucket control is used to raise and lower the bucket? - Answers✔Lift
control lever
Which front-end loader control regulates the transmission speed? - Answers✔Range control
lever
1|Page
, ©BRAINBARTER EXAM SOLUTIONS 2024/2025
ALL RIGHTS RESERVED.
How should you backfill a trench when using a front-end loader with a narrow bucket? -
Answers✔Backfill the area from an angle
What must you do before performing any maintenance action on a front-end loader? -
Answers✔Turn the loader off and set the parking brake
What advantage does a compact track loader (CTL) have over a standard front-end loader? -
Answers✔Can operate in a smaller area
How do you spin a compact track loader (CTL) around within its own body length? -
Answers✔Move the travel controls in opposite directions
If you release the skid-steer loader travel controls levers, - Answers✔Equipment will stop
moving
You ensure good sweeping action and avoid bystanders or damaging equipment when using the
skid-steer loader with the sweeper attachment by using a broom pattern - Answers✔Two to
three inches wide
How are MOST attachments controlled once the auxiliary hydraulics are activated in the
compact track loader (CTL)? - Answers✔Toggle switches on the travel controls
What distance in feet is the efficient operating range of a scraper? - Answers✔300
What four phases of operation make up the work cycle in any scraper operation? -
Answers✔Loading, hauling, spreading, and returning
2|Page
