12/2/24, 4:03 PM 2024|DANTE Level 3 |Comprehensive questions and verified answers/accurate solutions|Get it 100% correct!! Already graded …
2024|DANTE Level 3 |Comprehensive questions
and verified answers/accurate solutions|Get it
100% correct!! Already graded A+
Practice questions for this set
Learn 6/7 Study with Learn
False
Give this one a try later!
If 5 unicast channels are sent
between two devices, how much Dante devices automatically
1 bandwidth, and how many flows change unicast flows to multicast
are being used? (sample rate when a fan-out is detected.
48KHz/24-bit)
How many channels are contained
3 4 Network bandwidth is measured in:
in a Multicast Flow?
Don't know?
Terms in this set (95)
https://quizlet.com/978510196/2024dante-level-3-comprehensive-questions-and-verified-answersaccurate-solutionsget-it-100-correct-already-gr… 1/18
,12/2/24, 4:03 PM 2024|DANTE Level 3 |Comprehensive questions and verified answers/accurate solutions|Get it 100% correct!! Already graded …
A Dante system is UDP 4321
running on a converged
enterprise network.
Clocking and discovery
are working OK, but
audio only passes in
unicast. You conclude
that a firewall is blocking
your multicast audio
packets. What port would
you ask the IT
administrator to unblock?
If 5 unicast channels are 12 mbps, and 2 flows
sent between two
devices, how much
bandwidth, and how
many flows are being
used? (sample rate
48KHz/24-bit)
Dante media clock 1 micro sec
synchronization is more
accurate than [...]
between any two devices
on the network (Select
the most accurate
variance we guarantee)
If 3 channels are being 6mbps
sent within 1 unicast flow,
how much bandwidth is
being used? (sample rate
48KHz/24-bit)
Routers do not use IP FALSE
addresses, they only use
MAC addresses.
https://quizlet.com/978510196/2024dante-level-3-comprehensive-questions-and-verified-answersaccurate-solutionsget-it-100-correct-already-gr… 2/18
, 12/2/24, 4:03 PM 2024|DANTE Level 3 |Comprehensive questions and verified answers/accurate solutions|Get it 100% correct!! Already graded …
On a Unicast 1 milli seconds
transmission, a transmitter
and receiver have latency
settings of 0.25 msec and
1.00 msec, respectively.
When will the audio
playout of the receiving
device?
1 milli seconds
A Dante device can have FALSE
an unlimited number of
receive flows.
It is a best practice (and TRUE
strongly suggested) to
designate unique IP
subnets to each VLAN.
Among other things,
you'll be able to use a
router to connect the
devices across VLANs
(via unicast).
How much bandwidth 6mbps
does a unicast audio flow
use? (Assume 48kHz, 24-
bit.)
A multicast flow is TRUE
initiated by a transmitter
alone.
A switch populates its [...] Mac Address Table
by observing the source MAC Addresses
[...] of ARP requests and
responses passing
through.
IGMP snooping listens IGMP query, multicast
for reports to [...]
messages in order to
restrict [...] traffic.
https://quizlet.com/978510196/2024dante-level-3-comprehensive-questions-and-verified-answersaccurate-solutionsget-it-100-correct-already-gr… 3/18
2024|DANTE Level 3 |Comprehensive questions
and verified answers/accurate solutions|Get it
100% correct!! Already graded A+
Practice questions for this set
Learn 6/7 Study with Learn
False
Give this one a try later!
If 5 unicast channels are sent
between two devices, how much Dante devices automatically
1 bandwidth, and how many flows change unicast flows to multicast
are being used? (sample rate when a fan-out is detected.
48KHz/24-bit)
How many channels are contained
3 4 Network bandwidth is measured in:
in a Multicast Flow?
Don't know?
Terms in this set (95)
https://quizlet.com/978510196/2024dante-level-3-comprehensive-questions-and-verified-answersaccurate-solutionsget-it-100-correct-already-gr… 1/18
,12/2/24, 4:03 PM 2024|DANTE Level 3 |Comprehensive questions and verified answers/accurate solutions|Get it 100% correct!! Already graded …
A Dante system is UDP 4321
running on a converged
enterprise network.
Clocking and discovery
are working OK, but
audio only passes in
unicast. You conclude
that a firewall is blocking
your multicast audio
packets. What port would
you ask the IT
administrator to unblock?
If 5 unicast channels are 12 mbps, and 2 flows
sent between two
devices, how much
bandwidth, and how
many flows are being
used? (sample rate
48KHz/24-bit)
Dante media clock 1 micro sec
synchronization is more
accurate than [...]
between any two devices
on the network (Select
the most accurate
variance we guarantee)
If 3 channels are being 6mbps
sent within 1 unicast flow,
how much bandwidth is
being used? (sample rate
48KHz/24-bit)
Routers do not use IP FALSE
addresses, they only use
MAC addresses.
https://quizlet.com/978510196/2024dante-level-3-comprehensive-questions-and-verified-answersaccurate-solutionsget-it-100-correct-already-gr… 2/18
, 12/2/24, 4:03 PM 2024|DANTE Level 3 |Comprehensive questions and verified answers/accurate solutions|Get it 100% correct!! Already graded …
On a Unicast 1 milli seconds
transmission, a transmitter
and receiver have latency
settings of 0.25 msec and
1.00 msec, respectively.
When will the audio
playout of the receiving
device?
1 milli seconds
A Dante device can have FALSE
an unlimited number of
receive flows.
It is a best practice (and TRUE
strongly suggested) to
designate unique IP
subnets to each VLAN.
Among other things,
you'll be able to use a
router to connect the
devices across VLANs
(via unicast).
How much bandwidth 6mbps
does a unicast audio flow
use? (Assume 48kHz, 24-
bit.)
A multicast flow is TRUE
initiated by a transmitter
alone.
A switch populates its [...] Mac Address Table
by observing the source MAC Addresses
[...] of ARP requests and
responses passing
through.
IGMP snooping listens IGMP query, multicast
for reports to [...]
messages in order to
restrict [...] traffic.
https://quizlet.com/978510196/2024dante-level-3-comprehensive-questions-and-verified-answersaccurate-solutionsget-it-100-correct-already-gr… 3/18
