AMRT test Questions and Answers
When working around microbial contamination, our first concern is safety. Any worker
who suffers a cut or break in the skin should seek_________ medical attention. - correct
answer-immediate
With mold, the most common biohazards are mold spores and fragments that can be
______ - correct answer-inhaled
Aspergillus is a ____ which can cause a lung infection called aspergillosis. - correct
answer-mold
With sewage, the most common biohazards are bacteria, viruses, and ______. - correct
answer-parasites
Respirators come with different levels of protection, and are rated according to their "
assigned _______ factor." - correct answer-protection
An employer is required to Provide a safe workplace for employees, according to
OSHA's ________ ____ Clause. - correct answer-General Duty
A respirator training program must train technicians how to put on and take off a
respirator, how to take care for a respirator, and what a respirator well, and will not
protect against. Additional requirements for wearing a respirator are a ____ ________
of the technicians lung capacity and a ___ ____ to assure protection. - correct answer-
lung capacity, fit test
A HEPA filter stands for High Efficiency Particulate Air because it removes 99.97% of
_______ down to 0.3 micrometers. - correct answer-particles
The abbreviations for the most commonly used respirators in microbial remediation are
___ for the Air-Purifying Respirator and ____ for the Powered Air-Purifying Respirator. -
correct answer-APR, PAPR
Respirators protect workers from breathing particles smaller than 5 microns, like mold
spores. The small size of these particles allows them to be ______ deeply into the lungs
in large quantities. - correct answer-inhaled
Breathing mold spores and fragments can result in adverse effects from mold exposure
such as ___________/_______ - correct answer-Aspergillosis/Asthma
, Respirators will not protect the wearer from potential ______ deficiency. - correct
answer-oxygen
Dry ice blasting procedures can cause an _______ deficiency indoors, so technicians
must utilize an ________- monitoring sensor. - correct answer-oxygen, oxygen
The rotavirus is one of the most common ______ existing in sewage. - correct answer-
virus
For technicians performing sewage remediation work, the greatest risk is_____ which a
full face respirator helps prevent. - correct answer-ingestion
Attempts to salvage sewage contaminated semi-porous and highly porous materials
such as wall carpet can create a health risk by liberating_____agents. - correct answer-
infectious
Depending on local regulations, technician should discharge recovered sewage and
rinse water into the ______ _______ system. - correct answer-Sanitary Sewer
Workers who are exposed to sewage without adequate protection face an increased
risk of _____ disease. - correct answer-infectious
Each time donning a respirator, remediators shall conduct a positive and negative
pressure ______ check. - correct answer-negative
The immunizations that are highly recommended to sewage remediation workers are:
_____ /diphtheria vaccine, _____ vaccine and _____ vaccine. Health professionals will
recommend the proper immunizations for each employee. - correct answer-tetanus,
hepatitis A, hepatitis B
when exiting containment, the proper order of removing PPE equipment is:
First: _______
Second:_______
Third:_________ - correct answer-Protective clothing, gloves, respirators
To prevent cross-contamination as remediators leave, and re-enter the _____ area,
they should remove and replace _____ clothing each time. - correct answer-
containment, protective
Individuals who are especially at risk of reaction to mold and sewage are known as
______-compromised. - correct answer-immuno
Children are usually susceptible to expose your risks in indoor environments because of
their _________ immune system. - correct answer-undeveloped
When working around microbial contamination, our first concern is safety. Any worker
who suffers a cut or break in the skin should seek_________ medical attention. - correct
answer-immediate
With mold, the most common biohazards are mold spores and fragments that can be
______ - correct answer-inhaled
Aspergillus is a ____ which can cause a lung infection called aspergillosis. - correct
answer-mold
With sewage, the most common biohazards are bacteria, viruses, and ______. - correct
answer-parasites
Respirators come with different levels of protection, and are rated according to their "
assigned _______ factor." - correct answer-protection
An employer is required to Provide a safe workplace for employees, according to
OSHA's ________ ____ Clause. - correct answer-General Duty
A respirator training program must train technicians how to put on and take off a
respirator, how to take care for a respirator, and what a respirator well, and will not
protect against. Additional requirements for wearing a respirator are a ____ ________
of the technicians lung capacity and a ___ ____ to assure protection. - correct answer-
lung capacity, fit test
A HEPA filter stands for High Efficiency Particulate Air because it removes 99.97% of
_______ down to 0.3 micrometers. - correct answer-particles
The abbreviations for the most commonly used respirators in microbial remediation are
___ for the Air-Purifying Respirator and ____ for the Powered Air-Purifying Respirator. -
correct answer-APR, PAPR
Respirators protect workers from breathing particles smaller than 5 microns, like mold
spores. The small size of these particles allows them to be ______ deeply into the lungs
in large quantities. - correct answer-inhaled
Breathing mold spores and fragments can result in adverse effects from mold exposure
such as ___________/_______ - correct answer-Aspergillosis/Asthma
, Respirators will not protect the wearer from potential ______ deficiency. - correct
answer-oxygen
Dry ice blasting procedures can cause an _______ deficiency indoors, so technicians
must utilize an ________- monitoring sensor. - correct answer-oxygen, oxygen
The rotavirus is one of the most common ______ existing in sewage. - correct answer-
virus
For technicians performing sewage remediation work, the greatest risk is_____ which a
full face respirator helps prevent. - correct answer-ingestion
Attempts to salvage sewage contaminated semi-porous and highly porous materials
such as wall carpet can create a health risk by liberating_____agents. - correct answer-
infectious
Depending on local regulations, technician should discharge recovered sewage and
rinse water into the ______ _______ system. - correct answer-Sanitary Sewer
Workers who are exposed to sewage without adequate protection face an increased
risk of _____ disease. - correct answer-infectious
Each time donning a respirator, remediators shall conduct a positive and negative
pressure ______ check. - correct answer-negative
The immunizations that are highly recommended to sewage remediation workers are:
_____ /diphtheria vaccine, _____ vaccine and _____ vaccine. Health professionals will
recommend the proper immunizations for each employee. - correct answer-tetanus,
hepatitis A, hepatitis B
when exiting containment, the proper order of removing PPE equipment is:
First: _______
Second:_______
Third:_________ - correct answer-Protective clothing, gloves, respirators
To prevent cross-contamination as remediators leave, and re-enter the _____ area,
they should remove and replace _____ clothing each time. - correct answer-
containment, protective
Individuals who are especially at risk of reaction to mold and sewage are known as
______-compromised. - correct answer-immuno
Children are usually susceptible to expose your risks in indoor environments because of
their _________ immune system. - correct answer-undeveloped
