©FYNDLAY EXAM SOLUTIONS 2024/2025
ALL RIGHTS RESERVED.
Ca Smog Check Inspector Training Final
Review (Part 1) Exam Questions And
Answers (Guaranteed A+)
Equipped with dual tanks, tanks over 50 gal, vehicles for which no adapter is available, or have
inaccessible canisters, unless the vapor line is accessible. - answer✔All vehicles 1976-1995
receive a LPFET, unless ___________.
Idle Test, Crankcase Test, BAR Snap Test - answer✔What are the three parts of a "visible smoke
test" on a gasoline vehicle?
Automatic transmission in its normal driving gear, manual transmission in second gear -
answer✔What gear should be used when performing an ASM emissions test?
Faulty brakes, low oil pressure, large coolant leak, tire failure, gasoline leaks, engine noise,
overheating - answer✔These items can cause a vehicle to be rejected from an inspection.
Tire pressure, missing emission label, traction control - answer✔These items are not a reason to
reject vehicle from an inspection
Stoichiometry - answer✔What is the term for ideal combustion efficiency?
Advise the vehicle owner to have the vehicle diagnosed to determine the cause of the failure -
answer✔If a vehicle fails an inspection for any reason, what should the technician do?
Use the VIN on the vehicle and continue with the inspection. - answer✔If the VIN on the
registration and vehicle differ, what action should the technician take?
Notify the customer both orally and in writing that they are unable to repair if it fails. -
answer✔If a test and repair station does not have the tools/equipment to repair a vehicle, what
must be done prior to accepting a vehicle for an inspection.
Location of liquid fuel leak, reason for smoke test failure, E.O. numbers for aftermarket parts,
component which fails in "other" category, monitors not run to completion, location of
inaccessible canister for LPFET. - answer✔What must be noted on a VIR?
Check for a BAR Referee Label, and continue with the test if equipped. - answer✔A vehicle has
been converted from diesel to gasoline. All equipment is installed for the conversion. What
action should the inspector take?
1|Page
ALL RIGHTS RESERVED.
Ca Smog Check Inspector Training Final
Review (Part 1) Exam Questions And
Answers (Guaranteed A+)
Equipped with dual tanks, tanks over 50 gal, vehicles for which no adapter is available, or have
inaccessible canisters, unless the vapor line is accessible. - answer✔All vehicles 1976-1995
receive a LPFET, unless ___________.
Idle Test, Crankcase Test, BAR Snap Test - answer✔What are the three parts of a "visible smoke
test" on a gasoline vehicle?
Automatic transmission in its normal driving gear, manual transmission in second gear -
answer✔What gear should be used when performing an ASM emissions test?
Faulty brakes, low oil pressure, large coolant leak, tire failure, gasoline leaks, engine noise,
overheating - answer✔These items can cause a vehicle to be rejected from an inspection.
Tire pressure, missing emission label, traction control - answer✔These items are not a reason to
reject vehicle from an inspection
Stoichiometry - answer✔What is the term for ideal combustion efficiency?
Advise the vehicle owner to have the vehicle diagnosed to determine the cause of the failure -
answer✔If a vehicle fails an inspection for any reason, what should the technician do?
Use the VIN on the vehicle and continue with the inspection. - answer✔If the VIN on the
registration and vehicle differ, what action should the technician take?
Notify the customer both orally and in writing that they are unable to repair if it fails. -
answer✔If a test and repair station does not have the tools/equipment to repair a vehicle, what
must be done prior to accepting a vehicle for an inspection.
Location of liquid fuel leak, reason for smoke test failure, E.O. numbers for aftermarket parts,
component which fails in "other" category, monitors not run to completion, location of
inaccessible canister for LPFET. - answer✔What must be noted on a VIR?
Check for a BAR Referee Label, and continue with the test if equipped. - answer✔A vehicle has
been converted from diesel to gasoline. All equipment is installed for the conversion. What
action should the inspector take?
1|Page
