SSGI Lean Six Sigma Black Belt - Set
One
DMAIC - ✔✔-The acronym for the Lean Six Sigma cycle.
Quality and Consistency - ✔✔-The primary focus of Six Sigma.
Defects Per Million Opportunities - ✔✔-What does the acronym
DPMO represent?
3.4 - ✔✔-The number of DPMO in a Six Sigma process.
68 Percent - ✔✔-What percent of the observations, data points, or
events will fall between plus and minus 1 standard deviation of the
mean?
99.9997 Percent - ✔✔-What percent of the observations, data points,
or events will fall within plus and minus 6 standard deviations of the
mean?
Alpha - ✔✔-A process generates a sample mean beyond the UCL. But
the process mean has not shifted. What type of error has been made?
X-Bar Chart - ✔✔-What type of chart is used to monitor sample
means, when the size of the sample is between 12 and 25 and the data
are continuous?
, Lower Specification Limit and Upper Specification Limit - ✔✔-The
statistical terms that define the quality expected by customers and
included on a process control chart.
X-Bar Chart - ✔✔-The type of process control chart in which sample
means are displayed and the data are continuous.
R-Chart - ✔✔-The type of process control chart that displays process
variation when the sample size is less than twelve and the data are
continuous.
Distribution of Sample Means - ✔✔-The distribution that describes
the way in which sample means vary around the population mean.
Range - ✔✔-The statistic that measures the variation in a distribution
by taking into consideration only the highest and lowest values in a
dataset.
To ensure that the process mean has not shifted, and that the process
is in-control. - ✔✔-Purpose of an X-Bar Chart.
Value Stream Map - ✔✔-Another phrase for a process flow diagram
that illustrates process steps and delays.
Root Cause - ✔✔-A term that represents the real cause of a problem.
The relationship between process inputs and process outputs. Y
represents outputs, and x represents inputs. Outputs are therefore a
'function of' inputs. - ✔✔-What does Y = f(x) represent?
One
DMAIC - ✔✔-The acronym for the Lean Six Sigma cycle.
Quality and Consistency - ✔✔-The primary focus of Six Sigma.
Defects Per Million Opportunities - ✔✔-What does the acronym
DPMO represent?
3.4 - ✔✔-The number of DPMO in a Six Sigma process.
68 Percent - ✔✔-What percent of the observations, data points, or
events will fall between plus and minus 1 standard deviation of the
mean?
99.9997 Percent - ✔✔-What percent of the observations, data points,
or events will fall within plus and minus 6 standard deviations of the
mean?
Alpha - ✔✔-A process generates a sample mean beyond the UCL. But
the process mean has not shifted. What type of error has been made?
X-Bar Chart - ✔✔-What type of chart is used to monitor sample
means, when the size of the sample is between 12 and 25 and the data
are continuous?
, Lower Specification Limit and Upper Specification Limit - ✔✔-The
statistical terms that define the quality expected by customers and
included on a process control chart.
X-Bar Chart - ✔✔-The type of process control chart in which sample
means are displayed and the data are continuous.
R-Chart - ✔✔-The type of process control chart that displays process
variation when the sample size is less than twelve and the data are
continuous.
Distribution of Sample Means - ✔✔-The distribution that describes
the way in which sample means vary around the population mean.
Range - ✔✔-The statistic that measures the variation in a distribution
by taking into consideration only the highest and lowest values in a
dataset.
To ensure that the process mean has not shifted, and that the process
is in-control. - ✔✔-Purpose of an X-Bar Chart.
Value Stream Map - ✔✔-Another phrase for a process flow diagram
that illustrates process steps and delays.
Root Cause - ✔✔-A term that represents the real cause of a problem.
The relationship between process inputs and process outputs. Y
represents outputs, and x represents inputs. Outputs are therefore a
'function of' inputs. - ✔✔-What does Y = f(x) represent?
