Vivint SHP practice exam questions and
answers | verified
True or false the fire fighter may be installed next to a standalone battery powered
smoke detector CORRECT ANSWERS False
True or false when performing a full system test you may bypass any open doors or
windows CORRECT ANSWERS False
When programming and SKEY1 you must: CORRECT ANSWERS Always enable the
emergency key
True or false when running power to the take-345, polarity does not matter CORRECT
ANSWERS False
Select all that apply when programming the emergency key for SKEY1 one which
zone/sensor types are recommended to use CORRECT ANSWERS Audible alarm 07
auxiliary alarm 08
True or false when installing a SMKT3 you must use the included screws and anchors
CORRECT ANSWERS True
True or false when installing the fire fighter it is required to test the customers existing
smoke detectors CORRECT ANSWERS True
When installing a DW 21 where is the approved location for the sensor CORRECT
ANSWERS Between 6 inches (15cm) and 2 inches (61cm) from the floor
When installing a DW11 on a vinyl or metal frame what should you primarily use to
mount the sensor CORRECT ANSWERS Provided double-sided tape
Select all that apply which of the following materials can you use to group multiple
ground terminals in the takeover module CORRECT ANSWERS B connectors/beans
and Wire caps
Which of the following sensors are not allowed to program using a translator CORRECT
ANSWERS Smoke detector
True or false when installing the take 345 you must always test the new 12 V battery
before using it CORRECT ANSWERS True
What is the output voltage of the transformer used to power the Smart hub CORRECT
ANSWERS 12 VDC
answers | verified
True or false the fire fighter may be installed next to a standalone battery powered
smoke detector CORRECT ANSWERS False
True or false when performing a full system test you may bypass any open doors or
windows CORRECT ANSWERS False
When programming and SKEY1 you must: CORRECT ANSWERS Always enable the
emergency key
True or false when running power to the take-345, polarity does not matter CORRECT
ANSWERS False
Select all that apply when programming the emergency key for SKEY1 one which
zone/sensor types are recommended to use CORRECT ANSWERS Audible alarm 07
auxiliary alarm 08
True or false when installing a SMKT3 you must use the included screws and anchors
CORRECT ANSWERS True
True or false when installing the fire fighter it is required to test the customers existing
smoke detectors CORRECT ANSWERS True
When installing a DW 21 where is the approved location for the sensor CORRECT
ANSWERS Between 6 inches (15cm) and 2 inches (61cm) from the floor
When installing a DW11 on a vinyl or metal frame what should you primarily use to
mount the sensor CORRECT ANSWERS Provided double-sided tape
Select all that apply which of the following materials can you use to group multiple
ground terminals in the takeover module CORRECT ANSWERS B connectors/beans
and Wire caps
Which of the following sensors are not allowed to program using a translator CORRECT
ANSWERS Smoke detector
True or false when installing the take 345 you must always test the new 12 V battery
before using it CORRECT ANSWERS True
What is the output voltage of the transformer used to power the Smart hub CORRECT
ANSWERS 12 VDC
