ACI Certification Section 3 Study Guide Solutions

ACI Certification Section 3 Study Guide Solutions 1.5 inches - ANSWER-The slump test is applicable to plastic concrete with a maximum size aggregate of ... wet sieved over a 1.5" sieve - ANSWER-When the concrete contains aggregate larger than allowed for the slump test, the large aggregate must be ... frustum of a cone - ANSWER-The mold for making the slump test is in the shape of ... 12 inches - ANSWER-The height of the slump mold is ... False - ANSWER-The interior surface of the slump mold is allowed to have minor irregularities. True or False. round spherical - ANSWER-For use in the slump test, the tamping end or both ends of the tamping rod must be ... C172/C172m - ANSWER-The sample of concrete for use in making the slump test must be obtained in accordance with practice ... Copyright ©SOPHIABENNETT 2025 ACADEMIC YEARALL RIGHTS RESERVED. Page 2/3 False - ANSWER-The slump mold should be in a dry condition before beginning the test. True or False. flat, moist, non-absorbent and rigid - ANSWER-The surface on which the slump mold will be placed must be ... 3 equal - ANSWER-The slump mold is filled in