Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 2 out of 11 pages
Exam (elaborations)

ASE B6 Test - Damage Analysis & Estimating 2023 Questions And Answers Complete

Document preview thumbnail
Preview 2 out of 11 pages

ASE B6 Test - Damage Analysis & Estimating 2023 Questions And Answers Complete What three things should be considered in any repair? - ANSWER -Safety, retained value and the vehicle owners best interest. When inspecting a vehicle, should your inspection be localized into one specific area? - ANSWER -No, kinetic energy has a tendency to travel through a vehicle and cause damages elsewhere. What are some measuring tools used to identify structural damage? - ANSWER - computerized measuring systems, universal three-dimensional measuring systems, laser systems and the tram gauge. What are the three spatial planes when measuring a vehicles dimensions? - ANSWER -Height from datum, width from centerline and length. Appraiser A says all brake fluid should be drained and replaced when replacing a caliper on the left front of a six-month old car. Appraiser B saya all that is required is refilling the brake fluid and bleeding the system. Who is right? A, B, Both A & B, Neither A or B? - ANSWER -Appraiser B only. Although brake fluid does become contaminated with moisture over time, this is not likely on a 6 month old car. Clean up time in reference to salvage parts means to.... - ANSWER -Remove the oil and grease from the parts. The painting is a separate billable expense. Appraiser A says storage charges are calculated per day at the prevailing market rate. Appraiser B says they are calculated at the shop's posted rate. Who is right? A, B, A & B, neither A or B? - ANSWER -Appraiser B only. The shop in possession of the vehicle can charge whatever they want, although most insurance companies will only pay for charges that correspond to reasonable market prices. Appraiser A Says the factory E-coat corrosion protection must be replaced anytime it is damaged in a collision. Appraiser B says the E-coat must be restored to a level equivalent to that created at the factory. Who is right? A, B, A & B, neither A or B? - ANSWER -Both A & B. The factory E-coat must always be replaced when damaged and it must be done to a level equivalent with the factory work. "Set up and measure" refers to what? - ANSWER -The dollar allowance for the time a technician needs to mount a vehicle on a repair system to measure length, width from center-line and height from the datum plane. What are air conditioning components generally classified as? - ANSWER -Mechanical items. Mechanical operations are generally those bolted items inward of the radiator. Would an alternator be classified as a "betterment" item? - ANSWER -No. Betterment applies to normal wear & tear items that a vehicle owner should expect to replace in the life of a vehicle. Example: Battery, shocks, brake linings, tires, etc. Would aftermarket paint sealant cause a problem with a vehicle warranty? - ANSWER - No. Example of things that could cause a problem with a vehicle warranty are: repaired wiring harness, wire splicing, etc. A hybrid vehicles electric traction motors operate on... - ANSWER -650 volts. While some components may run on 12 volts, some Nickel Metal Hydride (NiMH) batteries contain as much as 650 volts TTY (torque to yield) refers to... - ANSWER -The strength of a fastener, its allowable reuse and the fact that a fastener deforms upon application of torque. It is a one time use fastener that is used on critical applications. When it is torqued, the threads deform. locking it in to place. UPCR stands for... - ANSWER -Uniform Procedures for Collision Repair (by I-CAR). To be considered "damaged", its _____ and _________ must be unequal with that before the accident in terms of the way something looks and operates. - ANSWER -form and function. Another term often used to describe "damage" is____________. - ANSWER - Nonconformity. When checking beneath a vehicle, you divide the under-body into three parts. What are those parts? - ANSWER -Front, middle/center and rear. The centerline of a vehicle is.... - ANSWER -an imaginary plane that divides the vehicle in half from front to rear. When inspection a vehicle, the surface you are inspection it on should be ______, ____, and free of ________. - ANSWER -Level, dry and free of debris. (level will help determine structural damage, dry for leaks, etc). Generally, these two types of vehicles are NOT great candidates for repairable vehicles: - ANSWER -Flood vehicles and vehicles that have had fires. Also, vehicles that have had major driveline damage (engine or transmission crushed). Bent seat attaching hardware, broken motor mounts, cracked transmission cases or damaged electronic components are all examples of _________ damage. - ANSWER - Indirect. You must trace the energy into the vehicle structure and looks closely for kinks, buckles and other signs of distortion. PUD stands for... - ANSWER -Prior unrelated damage (PUD). It is the role of the appraiser to attempt to identify pre-existing damage on the vehicle. The most obvious way to determine pre-existing damage (PUD), is to __________ the _________. - ANSWER -Interview the customer. Some telltale signs of detecting prior collision work are.... - ANSWER -Over-spray, paint tape edges, tool marks on fasteners, misaligned panels and missing Federal AntiTheft Standard labels (FATS). Another sign of prior repairs is inconsistent _____ ______ thickness. - ANSWER -" paint film" . This can be measured with paint film thickness or mil gauges. OEM paint will measure in the range of 3.5 to 5.5 mils (refinished panels can double that and a blended panel can be as much as 50% greater in thickness.) What is it called when a part folds onto itself like an accordion? - ANSWER - Convolution. A convoluted structural component should be replaced. What is the difference between a unitized frame and a uni-body? - ANSWER -There is no difference. In a uni-body or unitized vehicle, the frame and body are incorporated into a single welded structure. Should exhaust damaged systems be welded and repaired, or replaced all together? - ANSWER -Replaced. Exhaust gases contain poisonous carbon monoxide and leaks could create dangerous conditions for passengers. The "Inside Out" sequence refers to... - ANSWER -Calculating Labor times SAI refers to... - ANSWER -An angle in the suspension system - the steering axis inclination. This can be measured using wheel alignment equipment. Incorrect SAI contributes to poor handling. Using a tram gauge an appraiser can easily detect a ________ condition. - ANSWER - "Sway". With a tram gauge, it is easy to take linear measurements, such as point-topoint measurements across the front cage of a car. This occurs when the front cage of a uni-body is distorted from its former symmetrical configuration to that of a parallelogram. - ANSWER -A sway condition. R&R - ANSWER -Remove and Replace R&I - ANSWER -Remove and reinstall What's a simple field test to determine if the vehicle has a clearcoat? - ANSWER -Take a piece of fine grit sandpaper and scuff the top coat. If the material on the sandpaper

Content preview

ASE B6 Test - Damage Analysis & Estimating
2023 Questions And Answers Complete
What three things should be considered in any repair? - ANSWER -Safety, retained
value and the vehicle owners best interest.

When inspecting a vehicle, should your inspection be localized into one specific area? -
ANSWER -No, kinetic energy has a tendency to travel through a vehicle and cause
damages elsewhere.

What are some measuring tools used to identify structural damage? - ANSWER -
computerized measuring systems, universal three-dimensional measuring systems,
laser systems and the tram gauge.

What are the three spatial planes when measuring a vehicles dimensions? - ANSWER
-Height from datum, width from centerline and length.

Appraiser A says all brake fluid should be drained and replaced when replacing a
caliper on the left front of a six-month old car. Appraiser B saya all that is required is
refilling the brake fluid and bleeding the system. Who is right? A, B, Both A & B, Neither
A or B? - ANSWER -Appraiser B only. Although brake fluid does become contaminated
with moisture over time, this is not likely on a 6 month old car.

Clean up time in reference to salvage parts means to.... - ANSWER -Remove the oil
and grease from the parts. The painting is a separate billable expense.

Appraiser A says storage charges are calculated per day at the prevailing market rate.
Appraiser B says they are calculated at the shop's posted rate. Who is right? A, B, A &
B, neither A or B? - ANSWER -Appraiser B only. The shop in possession of the vehicle
can charge whatever they want, although most insurance companies will only pay for
charges that correspond to reasonable market prices.

Appraiser A Says the factory E-coat corrosion protection must be replaced anytime it is
damaged in a collision. Appraiser B says the E-coat must be restored to a level
equivalent to that created at the factory. Who is right? A, B, A & B, neither A or B? -
ANSWER -Both A & B. The factory E-coat must always be replaced when damaged and
it must be done to a level equivalent with the factory work.

"Set up and measure" refers to what? - ANSWER -The dollar allowance for the time a
technician needs to mount a vehicle on a repair system to measure length, width from
center-line and height from the datum plane.

What are air conditioning components generally classified as? - ANSWER -Mechanical
items. Mechanical operations are generally those bolted items inward of the radiator.

, Would an alternator be classified as a "betterment" item? - ANSWER -No. Betterment
applies to normal wear & tear items that a vehicle owner should expect to replace in the
life of a vehicle. Example: Battery, shocks, brake linings, tires, etc.

Would aftermarket paint sealant cause a problem with a vehicle warranty? - ANSWER -
No. Example of things that could cause a problem with a vehicle warranty are: repaired
wiring harness, wire splicing, etc.

A hybrid vehicles electric traction motors operate on... - ANSWER -650 volts. While
some components may run on 12 volts, some Nickel Metal Hydride (NiMH) batteries
contain as much as 650 volts

TTY (torque to yield) refers to... - ANSWER -The strength of a fastener, its allowable
reuse and the fact that a fastener deforms upon application of torque. It is a one time
use fastener that is used on critical applications. When it is torqued, the threads deform.
locking it in to place.

UPCR stands for... - ANSWER -Uniform Procedures for Collision Repair (by I-CAR).

To be considered "damaged", its _____ and _________ must be unequal with that
before the accident in terms of the way something looks and operates. - ANSWER -form
and function.

Another term often used to describe "damage" is____________. - ANSWER -
Nonconformity.

When checking beneath a vehicle, you divide the under-body into three parts. What are
those parts? - ANSWER -Front, middle/center and rear.

The centerline of a vehicle is.... - ANSWER -an imaginary plane that divides the vehicle
in half from front to rear.

When inspection a vehicle, the surface you are inspection it on should be ______,
____, and free of ________. - ANSWER -Level, dry and free of debris. (level will help
determine structural damage, dry for leaks, etc).

Generally, these two types of vehicles are NOT great candidates for repairable
vehicles: - ANSWER -Flood vehicles and vehicles that have had fires. Also, vehicles
that have had major driveline damage (engine or transmission crushed).

Bent seat attaching hardware, broken motor mounts, cracked transmission cases or
damaged electronic components are all examples of _________ damage. - ANSWER -
Indirect. You must trace the energy into the vehicle structure and looks closely for kinks,
buckles and other signs of distortion.

Document information

Uploaded on
November 17, 2024
Number of pages
11
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$10.99

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
TheExamMaestro
3.6
(18)
Sold
153
Followers
5
Items
3748
Last sold
1 week ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions