TPC 108 POWERTOOLS (2024-2025) EXAM QUESTIONS
WITH ANSWERS.
A saw protractor has a moveable arm which can be set in
small increments up to - <<<Answers>>>180 degrees
A dado saw blade set is a combination of __________ and
__________ blades. - <<<Answers>>>cutters and chippers
Pneumatic grinders often fail because of -
<<<Answers>>>improper lubrication
Which part of a whetstone should be used for sharpening a
pointed tool? - <<<Answers>>>SIDES
The size of a pneumatic drill is determined by the -
<<<Answers>>>largest bit the chuck can hold
The positive-drive clutch mechanism remains engaged as long
as you press the - <<<Answers>>>bit on the fastener
How many blows per minute does an electric hammer
deliver? - <<<Answers>>>2000-3000 blows per minute
To put a screwdriver tip back in shape, first grind the tip to a
_______° angle to the shank. - <<<Answers>>>90 degree
, TPC 108 POWERTOOLS (2024-2025) EXAM QUESTIONS
WITH ANSWERS.
The rip blade has - <<<Answers>>>chisel shape for rapid
cutting making splinters
Most moisture is removed from a pneumatic tool's air supply
at the - <<<Answers>>>compressor
The blade motion of a reciprocating saw is -
<<<Answers>>>backstroke cut
You should use a jig when - <<<Answers>>>drilling at an
angle
Examples of template routing include - <<<Answers>>>Dove
Tail Joints and Hinge Butt Mortising
When replacing the brushes in an electric hammer, clean the
commutator with - <<<Answers>>>fine sandpaper
What should you do if the bit seizes up in the work while
using an electric hammer? - <<<Answers>>>lightly tap
Dressing a grinding wheel means to - <<<Answers>>>expose
grit
The threaded shaft on which the blade of a circular saw is
mounted is called the - <<<Answers>>>arbor
WITH ANSWERS.
A saw protractor has a moveable arm which can be set in
small increments up to - <<<Answers>>>180 degrees
A dado saw blade set is a combination of __________ and
__________ blades. - <<<Answers>>>cutters and chippers
Pneumatic grinders often fail because of -
<<<Answers>>>improper lubrication
Which part of a whetstone should be used for sharpening a
pointed tool? - <<<Answers>>>SIDES
The size of a pneumatic drill is determined by the -
<<<Answers>>>largest bit the chuck can hold
The positive-drive clutch mechanism remains engaged as long
as you press the - <<<Answers>>>bit on the fastener
How many blows per minute does an electric hammer
deliver? - <<<Answers>>>2000-3000 blows per minute
To put a screwdriver tip back in shape, first grind the tip to a
_______° angle to the shank. - <<<Answers>>>90 degree
, TPC 108 POWERTOOLS (2024-2025) EXAM QUESTIONS
WITH ANSWERS.
The rip blade has - <<<Answers>>>chisel shape for rapid
cutting making splinters
Most moisture is removed from a pneumatic tool's air supply
at the - <<<Answers>>>compressor
The blade motion of a reciprocating saw is -
<<<Answers>>>backstroke cut
You should use a jig when - <<<Answers>>>drilling at an
angle
Examples of template routing include - <<<Answers>>>Dove
Tail Joints and Hinge Butt Mortising
When replacing the brushes in an electric hammer, clean the
commutator with - <<<Answers>>>fine sandpaper
What should you do if the bit seizes up in the work while
using an electric hammer? - <<<Answers>>>lightly tap
Dressing a grinding wheel means to - <<<Answers>>>expose
grit
The threaded shaft on which the blade of a circular saw is
mounted is called the - <<<Answers>>>arbor
