©THEBRIGHT EXAM SOLUTIONS
11/8/2024 12:08 PM
APMP FINALS Exam Questions And
Answers 100% Pass
The effectiveness of any particular method of NDI depends upon the skill, experience, and training of
the _________ performing the inspection process. - answer✔Personnel
Level I NDT Specialist is also referred as _______ - answer✔Special
Initial classroom hours and on-the-job training shall be sufficient to qualify an individual for certification
for a specific task. The individual must be able to pass a vision and color perception examination, a
general exam dealing with standards and NDT procedures, and a practical exam - answer✔Level 1
The individual shall have an FAA Airframe and Powerplant Mechanic Certificate, complete the required
number of formal classroom hours, and complete an examination. - answer✔Level 2
The individual must have graduated from a 4-year college or university with a degree in engineering or
science, plus 1 year of minimum experience in NDT in an assignment comparable to that of a Level II in
the applicable NDT methods - answer✔Level 3
The individual must have 4 years of experience working as a Level II in the applicable NDT methods and
complete an examination. - answer✔Level 3
The NDI method and procedure to be used for any specific part or component will generally be specified
in the aircraft or component _____________________. - answer✔Maintenance/Overhaul Manual
Making the correct NDI method selection requires an understanding of the basic principles, limitations,
and advantages and disadvantages of the available NDI methods and an understanding of their
comparative effectiveness and cost. - answer✔Appropriate Method
"(1) The critical nature of the component;
(2) The material, size, shape, and weight of the part;
(3) The type of defect sought;
(4) Maximum acceptable defect limits in size and distribution;
(5) Possible locations and orientations of defects;
, ©THEBRIGHT EXAM SOLUTIONS
11/8/2024 12:08 PM
(6) Part accessibility or portability; and
(7) The number of parts to be inspected. " - answer✔Other Factors
The various materials used in NDI may contain chemicals, that if improperly used, can be hazardous to
the health and safety of operators and the safety of the environment, aircraft, and engines. Information
on safe handling of materials is provided in __________. - answer✔Material Safety Data Sheet
The degree of inspection sensitivity required is an important factor in selecting the NDI method. Critical
parts that cannot withstand small defects and could cause catastrophic failure require the use of the
more sensitive NDI methods. Less critical parts and general hardware generally require less-sensitive
NDI methods. - answer✔Degree of Inspection
used to detect visible flaws such as deformation, welding defects and corrosion. Many tools can be used
during the inspection such as a borescope, gauges, cameras, etc. - answer✔Visual Inspection
a widely applied and low-cost inspection method used to check surface-breaking defects in all non-
porous materials. - answer✔Penetrant Inspection
The method involves gently tapping the part with a special tap hammer or even a coin, highly dependant
on the skill and experience of the inspector. - answer✔Tap Testing
technique that detects and monitors the release of ultrasonic stress waves from localised sources when
a material deforms under stress. - answer✔Acoustic Emission
method which uses either x-rays or gamma rays to examine the internal structure of manufactured
components identifying any flaws or defects. - answer✔Radiography
for detecting surface and shallow subsurface discontinuities in ferromagnetic materials such as iron,
nickel, cobalt, and some of their alloys. - answer✔Magnetic Particle Inspection
takes advantage of high frequency sound waves to analyze inconsistencies within materials -
answer✔Ultrasonic Inspection
use of electromagnetic induction to detect and characterize surface and sub-surface flaws in conductive
materials - answer✔Eddy Current Inspection
Many aircraft structures are made of metal, and the most insidious form of damage to those structures
is - answer✔Corrosion
Materials used in 787 Body - answer✔Fiberglass
Aluminum
Carbon laminate composite
Carbon sandwich composite
, ©THEBRIGHT EXAM SOLUTIONS
11/8/2024 12:08 PM
Aluminum/Steel/Titanium
Total materials used in 787 body (by weight) - answer✔Composites - 50%
Aluminum - 20%
Titanium - 15%
Steel - 10%
Other - 5%
Types of Corrosion - answer✔Direct Chemical Attack/Chemical Reaction
Electrochemical Attack
An attack resulting from a direct exposure of a bare surface to caustic liquid or gaseous agents -
answer✔Direct Chemical Attack/Chemical Corrosion
Changes are occurring simultaneously at the same point. - answer✔Direct Chemical Attack/Chemical
Corrosion
The reaction in this corrosive attack requires a medium, usually water, which is capable of conducting a
tiny current of electricity. - answer✔Electrochemical Attack
When a metal comes in contact with a corrosive agent and is also connected by a liquid or gaseous path
through which electrons may flow, corrosion begins as the metal decays by ________ -
answer✔Oxidation
Degradation of metals due to electrochemical process - answer✔Corrosion
Chemical reaction involving the transfer of electrons between two electrodes in an electrochemical cell -
answer✔Electrochemical Process
Device which converts chemical energy into electrical energy - answer✔Electrochemical cell or corrosion
cell
Fundamental components of electrochemical cell - answer✔Anode
Cathode
Metallic Path
Electrolyte
Metal in here is being oxidized causing it to corrode or lose mass - answer✔Anode
Electrons produced travel towards cathode through this - answer✔Metallic path
11/8/2024 12:08 PM
APMP FINALS Exam Questions And
Answers 100% Pass
The effectiveness of any particular method of NDI depends upon the skill, experience, and training of
the _________ performing the inspection process. - answer✔Personnel
Level I NDT Specialist is also referred as _______ - answer✔Special
Initial classroom hours and on-the-job training shall be sufficient to qualify an individual for certification
for a specific task. The individual must be able to pass a vision and color perception examination, a
general exam dealing with standards and NDT procedures, and a practical exam - answer✔Level 1
The individual shall have an FAA Airframe and Powerplant Mechanic Certificate, complete the required
number of formal classroom hours, and complete an examination. - answer✔Level 2
The individual must have graduated from a 4-year college or university with a degree in engineering or
science, plus 1 year of minimum experience in NDT in an assignment comparable to that of a Level II in
the applicable NDT methods - answer✔Level 3
The individual must have 4 years of experience working as a Level II in the applicable NDT methods and
complete an examination. - answer✔Level 3
The NDI method and procedure to be used for any specific part or component will generally be specified
in the aircraft or component _____________________. - answer✔Maintenance/Overhaul Manual
Making the correct NDI method selection requires an understanding of the basic principles, limitations,
and advantages and disadvantages of the available NDI methods and an understanding of their
comparative effectiveness and cost. - answer✔Appropriate Method
"(1) The critical nature of the component;
(2) The material, size, shape, and weight of the part;
(3) The type of defect sought;
(4) Maximum acceptable defect limits in size and distribution;
(5) Possible locations and orientations of defects;
, ©THEBRIGHT EXAM SOLUTIONS
11/8/2024 12:08 PM
(6) Part accessibility or portability; and
(7) The number of parts to be inspected. " - answer✔Other Factors
The various materials used in NDI may contain chemicals, that if improperly used, can be hazardous to
the health and safety of operators and the safety of the environment, aircraft, and engines. Information
on safe handling of materials is provided in __________. - answer✔Material Safety Data Sheet
The degree of inspection sensitivity required is an important factor in selecting the NDI method. Critical
parts that cannot withstand small defects and could cause catastrophic failure require the use of the
more sensitive NDI methods. Less critical parts and general hardware generally require less-sensitive
NDI methods. - answer✔Degree of Inspection
used to detect visible flaws such as deformation, welding defects and corrosion. Many tools can be used
during the inspection such as a borescope, gauges, cameras, etc. - answer✔Visual Inspection
a widely applied and low-cost inspection method used to check surface-breaking defects in all non-
porous materials. - answer✔Penetrant Inspection
The method involves gently tapping the part with a special tap hammer or even a coin, highly dependant
on the skill and experience of the inspector. - answer✔Tap Testing
technique that detects and monitors the release of ultrasonic stress waves from localised sources when
a material deforms under stress. - answer✔Acoustic Emission
method which uses either x-rays or gamma rays to examine the internal structure of manufactured
components identifying any flaws or defects. - answer✔Radiography
for detecting surface and shallow subsurface discontinuities in ferromagnetic materials such as iron,
nickel, cobalt, and some of their alloys. - answer✔Magnetic Particle Inspection
takes advantage of high frequency sound waves to analyze inconsistencies within materials -
answer✔Ultrasonic Inspection
use of electromagnetic induction to detect and characterize surface and sub-surface flaws in conductive
materials - answer✔Eddy Current Inspection
Many aircraft structures are made of metal, and the most insidious form of damage to those structures
is - answer✔Corrosion
Materials used in 787 Body - answer✔Fiberglass
Aluminum
Carbon laminate composite
Carbon sandwich composite
, ©THEBRIGHT EXAM SOLUTIONS
11/8/2024 12:08 PM
Aluminum/Steel/Titanium
Total materials used in 787 body (by weight) - answer✔Composites - 50%
Aluminum - 20%
Titanium - 15%
Steel - 10%
Other - 5%
Types of Corrosion - answer✔Direct Chemical Attack/Chemical Reaction
Electrochemical Attack
An attack resulting from a direct exposure of a bare surface to caustic liquid or gaseous agents -
answer✔Direct Chemical Attack/Chemical Corrosion
Changes are occurring simultaneously at the same point. - answer✔Direct Chemical Attack/Chemical
Corrosion
The reaction in this corrosive attack requires a medium, usually water, which is capable of conducting a
tiny current of electricity. - answer✔Electrochemical Attack
When a metal comes in contact with a corrosive agent and is also connected by a liquid or gaseous path
through which electrons may flow, corrosion begins as the metal decays by ________ -
answer✔Oxidation
Degradation of metals due to electrochemical process - answer✔Corrosion
Chemical reaction involving the transfer of electrons between two electrodes in an electrochemical cell -
answer✔Electrochemical Process
Device which converts chemical energy into electrical energy - answer✔Electrochemical cell or corrosion
cell
Fundamental components of electrochemical cell - answer✔Anode
Cathode
Metallic Path
Electrolyte
Metal in here is being oxidized causing it to corrode or lose mass - answer✔Anode
Electrons produced travel towards cathode through this - answer✔Metallic path
