SOLUTIONS (RATED A)
chapter 1 - ANSWER
A primary objective of hunter education programs is - ANSWER produce knowledgeable responsible and
involved hunters
Name three hunting-related projects for which the Federal Aid in Wildlife Restoration Act (Pittman-
Robertson Act) provides funding - ANSWER 1)Hunter safety
2)land acquisition
3)habitat improvement
Which of these is not a source of hunter education funding? - ANSWER State highway department
Name three behaviors of a responsible hunter - ANSWER 1) Courtesy
2) Respect of others
3) Obey hunting laws
chapter 2 - ANSWER
The three basic parts of a modern firearm are - ANSWER Action, stock, barrel
Look on page 105 under Ch 2 questions, write down the parts of the rifle in the short answer section
labeled as A,B,C,D - ANSWER 1) stock
2) sight
3)trigger
4) muzzle
, The component in ammunition that ignites the gunpowder when struck by the firing pin is the - ANSWER
Primer
The action of a firearm is made up of parts that - ANSWER load, unload, fire and eject the cartridge or
shot shell
You should use only ammunition that exactly matches the caliber or gauge specifications marked on the
________ of your firearm. - ANSWER barrel
List 6 types of firearm actions - ANSWER 1) bolt
2) lever
3) pump
4) semi-automatic
5) break/hinge
6) revolving
A safety is located around the receiver of the firearm and the - ANSWER is a device that blocks the action
to prevent accidental firng
The most accurate sight for a firearm is the - ANSWER telescope
The design feature that causes a bullet to spiral, which increases accuracy and distance, is called -
ANSWER rifling
_________ is a measure related to the diameter of the bore ad the size of the shotshell designed for that
bore. - ANSWER gauge
When refering to firearms, "caliber" is - ANSWER used to describe the size of a rifle bore and the size of
cartridge's designed for different bores.
List the most common shotgun chokes (4) - ANSWER 1) Cylinder