TestTrackers: Unlock Your Exam Potential! | Quality Practice Materials | Boost Your Confidence Today!
AMT MT Study Guide Questions and
Correct Answers the Latest Update
The three major phases of laboratory testing that a QA program should evaluate include
a. mean, standard deviation, and coefficient of variation.
b. pre-op, operative, and post-op.
c. pre-analytical, analytical, and post-analytical.
d. outpatient, inpatient, and non-patient.
✓ c. pre-analytical, analytical, and post-analytical.
The process by which test results achieve the same high levels of accuracy and precision that
can be reproduced across measurement systems, laboratories and time is referred to as
a. laboratory process control.
b. laboratory calibration.
c. laboratory standardization.
d. laboratory verification.
✓ c. laboratory standardization.
What characteristics/functions do calibrators have?
|
✓ Thank You for Choosing Us! ✓ Resources & Updates: [Testtrackers - Stuvia US]
✓ © 2024 TestTrackers ✓ Your Success is Our Mission!
✓ Customer Support: [+254707240657]
, TestTrackers: Unlock Your Exam Potential! | Quality Practice Materials | Boost Your Confidence Today!
a. They contain a known amount of analyte being tested.
b. They monitor the quality of reagents.
c. They monitor the quality of the sample.
d. They prevent equipment failure.
✓ a. They contain a known amount of analyte being tested.
An abrupt demonstrated change in the mean is a
a. shift.
b. trend.
c. variance.
d. deviation.
✓ a. shift.
Qualitative examinations are those that
a. qualify for waived testing.
b. produce non-numerical results.
c. do not require quality control.
d. do not require proficiency testing.
|
✓ Thank You for Choosing Us! ✓ Resources & Updates: [Testtrackers - Stuvia US]
✓ © 2024 TestTrackers ✓ Your Success is Our Mission!
✓ Customer Support: [+254707240657]
, TestTrackers: Unlock Your Exam Potential! | Quality Practice Materials | Boost Your Confidence Today!
✓ b. produce non-numerical results.
A property of a test that is used to describe its quality (such as accuracy, precision, sensitivity,
etc.) is a
a. performance characteristic.
b. performance enhancement.
c. performance verification.
d. performance specification.
✓ a. performance characteristic
Under CLIA law, the process of testing and adjusting an instrument or test system to establish a
correlation between the measured response and the concentration or amount of the substance
that is being measuredby the test procedure is
a. calibration.
b. calibration verification.
c. a challenge.
d. quality control.
✓ a. calibration.
What agency determines the complexity of a lab test system?
|
✓ Thank You for Choosing Us! ✓ Resources & Updates: [Testtrackers - Stuvia US]
✓ © 2024 TestTrackers ✓ Your Success is Our Mission!
✓ Customer Support: [+254707240657]
, TestTrackers: Unlock Your Exam Potential! | Quality Practice Materials | Boost Your Confidence Today!
a. CMS
b. FDA
c. CDC
d. OSHA
✓ b. FDA
Certain moderate complexity microscopy tests (such as urine sediment evaluation and skin
scrapings) commonly performed by healthcare providers in the office setting are classified as
a. provider moderate complexity tests.
b. provider exempt status.
c. provider personnel testing.
d. provider performed microscopy.
✓ d. provider performed microscopy.
Policies and procedures that are intended to promote the quality and validity of test data and
ensure the reliability and integrity of data generated by analytical laboratories is known as
a. CLIA Law.
b. Quality Assurance Plan (QAP).
|
✓ Thank You for Choosing Us! ✓ Resources & Updates: [Testtrackers - Stuvia US]
✓ © 2024 TestTrackers ✓ Your Success is Our Mission!
✓ Customer Support: [+254707240657]
AMT MT Study Guide Questions and
Correct Answers the Latest Update
The three major phases of laboratory testing that a QA program should evaluate include
a. mean, standard deviation, and coefficient of variation.
b. pre-op, operative, and post-op.
c. pre-analytical, analytical, and post-analytical.
d. outpatient, inpatient, and non-patient.
✓ c. pre-analytical, analytical, and post-analytical.
The process by which test results achieve the same high levels of accuracy and precision that
can be reproduced across measurement systems, laboratories and time is referred to as
a. laboratory process control.
b. laboratory calibration.
c. laboratory standardization.
d. laboratory verification.
✓ c. laboratory standardization.
What characteristics/functions do calibrators have?
|
✓ Thank You for Choosing Us! ✓ Resources & Updates: [Testtrackers - Stuvia US]
✓ © 2024 TestTrackers ✓ Your Success is Our Mission!
✓ Customer Support: [+254707240657]
, TestTrackers: Unlock Your Exam Potential! | Quality Practice Materials | Boost Your Confidence Today!
a. They contain a known amount of analyte being tested.
b. They monitor the quality of reagents.
c. They monitor the quality of the sample.
d. They prevent equipment failure.
✓ a. They contain a known amount of analyte being tested.
An abrupt demonstrated change in the mean is a
a. shift.
b. trend.
c. variance.
d. deviation.
✓ a. shift.
Qualitative examinations are those that
a. qualify for waived testing.
b. produce non-numerical results.
c. do not require quality control.
d. do not require proficiency testing.
|
✓ Thank You for Choosing Us! ✓ Resources & Updates: [Testtrackers - Stuvia US]
✓ © 2024 TestTrackers ✓ Your Success is Our Mission!
✓ Customer Support: [+254707240657]
, TestTrackers: Unlock Your Exam Potential! | Quality Practice Materials | Boost Your Confidence Today!
✓ b. produce non-numerical results.
A property of a test that is used to describe its quality (such as accuracy, precision, sensitivity,
etc.) is a
a. performance characteristic.
b. performance enhancement.
c. performance verification.
d. performance specification.
✓ a. performance characteristic
Under CLIA law, the process of testing and adjusting an instrument or test system to establish a
correlation between the measured response and the concentration or amount of the substance
that is being measuredby the test procedure is
a. calibration.
b. calibration verification.
c. a challenge.
d. quality control.
✓ a. calibration.
What agency determines the complexity of a lab test system?
|
✓ Thank You for Choosing Us! ✓ Resources & Updates: [Testtrackers - Stuvia US]
✓ © 2024 TestTrackers ✓ Your Success is Our Mission!
✓ Customer Support: [+254707240657]
, TestTrackers: Unlock Your Exam Potential! | Quality Practice Materials | Boost Your Confidence Today!
a. CMS
b. FDA
c. CDC
d. OSHA
✓ b. FDA
Certain moderate complexity microscopy tests (such as urine sediment evaluation and skin
scrapings) commonly performed by healthcare providers in the office setting are classified as
a. provider moderate complexity tests.
b. provider exempt status.
c. provider personnel testing.
d. provider performed microscopy.
✓ d. provider performed microscopy.
Policies and procedures that are intended to promote the quality and validity of test data and
ensure the reliability and integrity of data generated by analytical laboratories is known as
a. CLIA Law.
b. Quality Assurance Plan (QAP).
|
✓ Thank You for Choosing Us! ✓ Resources & Updates: [Testtrackers - Stuvia US]
✓ © 2024 TestTrackers ✓ Your Success is Our Mission!
✓ Customer Support: [+254707240657]
