• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 2 out of 5 pages
Exam (elaborations)

BPI Building Science Principles Chapter 1:Introduction

Document preview thumbnail
Preview 2 out of 5 pages

What are "The Big Three" - moving into, out of, and around the space you are in? - answer--Heat -Air -Moisture What is the systematic approach to home performance? - answer-Improving: -comfort -health -safety -energy efficiency -durability (of materials) Also includes: IAQ What are the three (3) building science principles? - answer--Physics -Chemistry -Thermodynamics. Examples of components in the home that interact with each other - answer--Heating and cooling systems -Mechanical ventilation (such as exhaust fans) -Doors and windows. **Also, differences in temperature and humidity play a role. Another name for 'house-as-a-system' - answer-'whole-house' approach Any type of work done on the house such as air sealing, adding insulation, replacing a door or window, or installing mechanical ventilation will impact on the 'system' and how it functions? True or False - answer-True. If you change something you have to make sure something else doesn't need adjusted or added (ie. Ventilation) for a tight house. You can actually cause more damage by trying to make a house more efficient if you do not think of the 'house-as-a-system or have a 'whole-house' approach when doing retrofit work. BPI's motto: First, do no harm! The components of a house fall into four (4) general categories: - answer--Building -Mechanicals -Environment -Occupants Building examples: - answer--foundation -roof -doors Mechanicals examples: - answer--heating -cooling -ventilation -electrical (lighting & appliances) -plumbing Environment examples: - answer--interior temperature -interior relative humidity -indoor air quality: bringing in fresh air and reducing or eliminating pollutant concentrations Occupant examples: - answer--The importance of occupant behavior cannot be understated (ie. Use of lighting, exhaust fans, and DIY improvements -Occupants are the beginning and end of the system Interacting relationships are very important! What are some examples of interacting relationships and what can happen when not looking at the house-as-a-system? - answer--Air leakage left unaddressed means we have to heat and cool more often and energy bills go up. -Looking beyond energy impacts... Moisture in the home cause paint to peel and mold and mildew to form. -In winter, warm escaping into the attic can cause ice dams on the roof which can potentially damage the roof and other materials. A good understanding of building principles and 'house-as-a-system' approach must be used when doing any improvements to a house. Why? - answer-Simply air sealing an attic may fix one problem but may lead to other issues down the road... Such as too much moisture in the attic and creating mold on the rafters. **Home performances involves: testing AND verification **BPI motto: First, do no harm! Interacting relationships: Mechanical ventilation Bath exhaust fan purpose is to vent steam from the shower directly outdoors. However, when you use the fan, it creates air pressure differences between the inside and outside of the home. It INCREASES the air leakage while the fan is running so it should only be used when required. The correct amount of time to run the fan is? - answer-You should run the fan for approximately 20 minutes. **In case you feel that you will not remember to shut it off or if you feel you might forget to turn it on (for fear of forgetting to shut it off), you can install a timer on your wall and set if for 20-30 mins. What is one way without measuring to tell if you do or do not have enough insulation on the attic floor? - answer-The floor joists will show (unfinished attics) What will a homeowner install in the attic if they want a finished attic? Approximately how tall are they? What is their purpose? - answer-Attic knee walls. Approx. 3' to 4' tall, creating 2 side attic. Purpose is to increase the livable space in the home If you want to include the attic in your livable space, you would insulate what area in the attic? - answer-You would want to insulate the roof versus the floor and if knee walls are in place, also the knee walls would be insulated. What is the R-value for an attic's insulation? - answer-R-49 but BPI standards says R-38. Gable roof - answer-Most popular and simplest kind of roof. They consist of two FLAT slopes that are joined together to form a RIDGE (creating a peak or triangle) Grading (to determine if the house may take on water) - answer-slope @ base (foundation) of house should be angled away from house *approx. 2" slope What are some examples of retrofit work? - answer--air sealing -installing mechanical ventilation -insulation -replacing door/window A/C job is to? - answer-remove both heat & humidity How do you create the 'worst-case' depressurization? - answer-Turn on ALL exhaust fans including the dryer. Then you can test the water heater for back drafting. *Important to only use the exhaust fans for the time needed. Realize too that if you do this test before checking for moisture, you may have just sucked out all the moisture. Attic's used primarily for? - answer--Storage or placement of mechanical equipment -Always try to keep the ductwork out of the attic but if you must put it there... Make sure to seal it, insulate it, and bury it! Insulation is commonly put where in the attic? - answer-on the floor (unfinished attics) otherwise you would insulate the roof. Basic ceiling height and structure? Cathedral structure? Vaulted structure? - answer-8' ft high & flat (standard) 2 sloping slides meeting in center of room. Center point is higher than the walls. Has the same slope as roof. (cathedral) Does not match slope of roof; may have straight slopes or may be arched (vaulted) Drawbacks to "non-standard" ceilings - answer-hard to: -clean -paint -change light bulbs -cost more to heat or cool -expensive to install. Harder to insulate correctly. What are the different types of foundation and explain where ductwork, utilities and mechanical equipment is placed. - answer-1) slab on grade - "no basement", least expensive to construct (no excavation), ductwork usually in the attic. Most utilities are under the slab. Mechanical equipment placed in living space. Serves as the house's foundation and its first floor. 2) crawl spaces - provide space for ductwork and wiring. Up about 4 feet off ground. Helps prevent moisture from getting into the home. Some excavation is required but somewhat inexpensive. 3) basement - adds an extra floor to the home, provides space for mechanical equipment, ductwork and utilities, most expensive to build as it requires significant excavation. Might have crawlspaces. May be finished or unfinished. Framing: Rafter - answer-SLOPED framing member that supports the roof Framing: Joist - answer-HORIZONTAL framing member that supports a ceiling or a floor Walls: Stud - answer-VERTICAL framing member that supports an interior or exterior wall. Typically 2 x 4 or 2 x 6 Walls: Bay - answer-the size of the cavity between the studs 'H

Content preview

BPI BUILDING SCIENCE
PRINCIPLES CHAPTER
1:INTRODUCTION

, BPI Building Science Principles Chapter 1:Introduction
What are "The Big Three" - moving into, out of, and around the space you are in? - answer--Heat
-Air
-Moisture

What is the systematic approach to home performance? - answer-Improving:
-comfort
-health
-safety
-energy efficiency
-durability (of materials)
Also includes: IAQ

What are the three (3) building science principles? - answer--Physics
-Chemistry
-Thermodynamics.

Examples of components in the home that interact with each other - answer--Heating and cooling
systems
-Mechanical ventilation (such as exhaust fans)
-Doors and windows.
**Also, differences in temperature and humidity play a role.

Another name for 'house-as-a-system' - answer-'whole-house' approach

Any type of work done on the house such as air sealing, adding insulation, replacing a door or window,
or installing mechanical ventilation will impact on the 'system' and how it functions? True or False -
answer-True.

If you change something you have to make sure something else doesn't need adjusted or added (ie.
Ventilation) for a tight house. You can actually cause more damage by trying to make a house more
efficient if you do not think of the 'house-as-a-system or have a 'whole-house' approach when doing
retrofit work.

BPI's motto: First, do no harm!

The components of a house fall into four (4) general categories: - answer--Building
-Mechanicals
-Environment
-Occupants

Building examples: - answer--foundation
-roof
-doors

Mechanicals examples: - answer--heating

Document information

Uploaded on
November 11, 2024
Number of pages
5
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$8.29

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
TOPDOCTOR
5.0
(1)
Sold
10
Followers
5
Items
3387
Last sold
1 year ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions