S95 Personal Exam Questions & Answers | 75
Questions with 100% Correct Answers | Updated &
Verified 2024
Practice questions for this set
Learn
Studied 7 terms
Nice work, you're crushing it
Continue studying in Learn
Terms in this set (76)
Which duties can an S-95 Visual Inspections Only - of fire alarm system
Certificate of Fitness components and smoke detectors
holder perform?
What is the primary To warn building occupants and transmit signals
purpose of Fire Alarm indicating a fire condition to the Fire Department via
Systems? central station.
The signal initiated by a fire alarm initiating device
What is a Fire Alarm such as a manual fire alarm pull station, smoke
signal? detector, water-flow switch, or any device in which
their activation indicates presence of fire.
, A signal indicating that a system or device being
What is a Supervisory
monitored has been compromised or is in an
Signal?
abnormal state.
No. The Facility Manager should investigate and
Is the FDNY dispatched
correct the supervisory condition indicated by the
for Supervisory Signals?
FACP.
A signal that indicates a fault with the fire equipment.
What is a Trouble Signal? It must have an audible signal, distinctive from alarm
signals
What is the maximum FOUR minutes
number of minutes that
routine handling should
take?-- from receipt of
trouble signal by central
station until initiation of
the investigation by
telephone.
Is the FDNY dispatched No. Trouble Signals aren't indicative of a fire condition.
for Trouble Signals?
What is an Acknowledge This switch/button is used to acknowledge alarm,
Switch (ACK) ? supervisory, or trouble conditions.
Why is an Alarm Silence This switch/button silences audible and visual devices
Switch helpful after an (sirens, bells, gongs) so it's easier for Emergency
evacuation - while the Responders to communicate.
source of alarm is being
investigated?
Which switch/button is The System Reset Switch
pushed once an alarm
condition is cleared?
Smoke Detectors should Once every six months
be cleaned not less than
Questions with 100% Correct Answers | Updated &
Verified 2024
Practice questions for this set
Learn
Studied 7 terms
Nice work, you're crushing it
Continue studying in Learn
Terms in this set (76)
Which duties can an S-95 Visual Inspections Only - of fire alarm system
Certificate of Fitness components and smoke detectors
holder perform?
What is the primary To warn building occupants and transmit signals
purpose of Fire Alarm indicating a fire condition to the Fire Department via
Systems? central station.
The signal initiated by a fire alarm initiating device
What is a Fire Alarm such as a manual fire alarm pull station, smoke
signal? detector, water-flow switch, or any device in which
their activation indicates presence of fire.
, A signal indicating that a system or device being
What is a Supervisory
monitored has been compromised or is in an
Signal?
abnormal state.
No. The Facility Manager should investigate and
Is the FDNY dispatched
correct the supervisory condition indicated by the
for Supervisory Signals?
FACP.
A signal that indicates a fault with the fire equipment.
What is a Trouble Signal? It must have an audible signal, distinctive from alarm
signals
What is the maximum FOUR minutes
number of minutes that
routine handling should
take?-- from receipt of
trouble signal by central
station until initiation of
the investigation by
telephone.
Is the FDNY dispatched No. Trouble Signals aren't indicative of a fire condition.
for Trouble Signals?
What is an Acknowledge This switch/button is used to acknowledge alarm,
Switch (ACK) ? supervisory, or trouble conditions.
Why is an Alarm Silence This switch/button silences audible and visual devices
Switch helpful after an (sirens, bells, gongs) so it's easier for Emergency
evacuation - while the Responders to communicate.
source of alarm is being
investigated?
Which switch/button is The System Reset Switch
pushed once an alarm
condition is cleared?
Smoke Detectors should Once every six months
be cleaned not less than
