11/7/24, 10:02 PM 2024 Newest|Mechanics Exam Review-NEIEP|2024-2025 UPDATE|COMPREHENSIVE FREQUENTLY MOST TESTED QU…
2024 Newest|Mechanics Exam Review-
NEIEP|2024-2025 UPDATE|COMPREHENSIVE
FREQUENTLY MOST TESTED QUESTIONS AND
VERIFIED ANSWERS|GET IT 100% ACCURATE!!
Practice questions for this set
Learn 1 /7 Study with Learn
Suicide Circuit - 425
Give this one a try later!
Runby for a 1:1 hits the CWT buffer A car weighs 2500lbs with a
4" below the top landing. CWT capacity of 2500lbs, The CWT is
1 runby should be set at 18". How 2 weighted 40% , how much is the
much should the ropes be motor lifting when the car is fully
shortened? loaded?
On a Ward-Leonard circuit the
On a geared machine the worm
brake is set, but the motor is trying
3 and worm gear are made out of
to slip through the brake. What is
what materials?
the issue?
Don't know?
https://quizlet.com/968352659/2024-newestmechanics-exam-review-neiep2024-2025-updatecomprehensive-frequently-most-tested-questions-a… 1/13
, 11/7/24, 10:02 PM 2024 Newest|Mechanics Exam Review-NEIEP|2024-2025 UPDATE|COMPREHENSIVE FREQUENTLY MOST TESTED QU…
Terms in this set (213)
A contractor wants to 100 fpm/125 fpm= 12"/ X =15
raise the car speed from
100 fpm to 125 fpm, it
currently has a 12" sheave.
What is required?
A MOV (Metal Oxide Replace it with a larger MOV - 630
Varistor) burns out. You
replace it, but cannot
read voltage or
resistance. What should
you do?
On a Ward-Leonard Suicide Circuit - 425
circuit the brake is set,
but the motor is trying to
slip through the brake.
What is the issue?
You have an old DC Leave the interpoles alone. When adding a SCR
motor and are adding an drive to the generator, the series loop is removed,
SCR drive, what do you as are the 3 resistors. Everything else remains the
do to the interpoles? same
A hydro runs up with no The relief valve is set too low - 815
load but will not run with
a full load. What is the
issue?
Runby for a 1:1 hits the 22" - 235
CWT buffer 4" below the
top landing. CWT runby
should be set at 18". How
much should the ropes
be shortened?
https://quizlet.com/968352659/2024-newestmechanics-exam-review-neiep2024-2025-updatecomprehensive-frequently-most-tested-questions-a… 2/13
2024 Newest|Mechanics Exam Review-
NEIEP|2024-2025 UPDATE|COMPREHENSIVE
FREQUENTLY MOST TESTED QUESTIONS AND
VERIFIED ANSWERS|GET IT 100% ACCURATE!!
Practice questions for this set
Learn 1 /7 Study with Learn
Suicide Circuit - 425
Give this one a try later!
Runby for a 1:1 hits the CWT buffer A car weighs 2500lbs with a
4" below the top landing. CWT capacity of 2500lbs, The CWT is
1 runby should be set at 18". How 2 weighted 40% , how much is the
much should the ropes be motor lifting when the car is fully
shortened? loaded?
On a Ward-Leonard circuit the
On a geared machine the worm
brake is set, but the motor is trying
3 and worm gear are made out of
to slip through the brake. What is
what materials?
the issue?
Don't know?
https://quizlet.com/968352659/2024-newestmechanics-exam-review-neiep2024-2025-updatecomprehensive-frequently-most-tested-questions-a… 1/13
, 11/7/24, 10:02 PM 2024 Newest|Mechanics Exam Review-NEIEP|2024-2025 UPDATE|COMPREHENSIVE FREQUENTLY MOST TESTED QU…
Terms in this set (213)
A contractor wants to 100 fpm/125 fpm= 12"/ X =15
raise the car speed from
100 fpm to 125 fpm, it
currently has a 12" sheave.
What is required?
A MOV (Metal Oxide Replace it with a larger MOV - 630
Varistor) burns out. You
replace it, but cannot
read voltage or
resistance. What should
you do?
On a Ward-Leonard Suicide Circuit - 425
circuit the brake is set,
but the motor is trying to
slip through the brake.
What is the issue?
You have an old DC Leave the interpoles alone. When adding a SCR
motor and are adding an drive to the generator, the series loop is removed,
SCR drive, what do you as are the 3 resistors. Everything else remains the
do to the interpoles? same
A hydro runs up with no The relief valve is set too low - 815
load but will not run with
a full load. What is the
issue?
Runby for a 1:1 hits the 22" - 235
CWT buffer 4" below the
top landing. CWT runby
should be set at 18". How
much should the ropes
be shortened?
https://quizlet.com/968352659/2024-newestmechanics-exam-review-neiep2024-2025-updatecomprehensive-frequently-most-tested-questions-a… 2/13
